Why Does Hydrogen Content Increase Again After Rotary Degassing of Molten Aluminum?
Author : Jack wang | Published On : 16 Nov 2026
Hydrogen content can increase again after rotary degassing of molten aluminum because degassing does not permanently protect the melt from hydrogen absorption. Even when a rotary degassing unit successfully reduces dissolved hydrogen to the required level, the molten aluminum can absorb hydrogen again through contact with humid air, wet refractory materials, contaminated transfer equipment, and moisture-containing process gases. Excessive surface turbulence, prolonged holding time, and poorly controlled metal transfer can further accelerate this deterioration.
For aluminum foundries, the real challenge is therefore not simply achieving a low hydrogen level immediately after degassing. It is maintaining that level until the molten aluminum enters the casting process.
This phenomenon is known as hydrogen reabsorption, hydrogen pickup, or melt regassing. It is particularly important in aluminum alloy production, aluminum rolling, continuous casting, aluminum billet casting, and high-quality aluminum foundries where hydrogen porosity, oxide inclusions, and inconsistent casting performance can result in significant production losses.
Understanding why hydrogen returns after rotary degassing requires examining the interaction between melt temperature, atmospheric humidity, gas distribution, surface turbulence, holding conditions, and downstream filtration.
AdTech China specializes in molten aluminum purification solutions, including rotary degassing equipment, online degassing systems, ceramic foam filters, filtration equipment, aluminum fluxes, and integrated aluminum launder systems. These technologies can be combined to help aluminum manufacturers improve melt cleanliness and maintain more consistent metal quality throughout the casting process.
1. What Happens to Hydrogen During Rotary Degassing?
Before investigating why hydrogen increases again, it is important to understand how rotary degassing removes dissolved hydrogen from molten aluminum.
1.1 The mechanism of hydrogen removal
Hydrogen is the most important dissolved gas affecting conventional aluminum casting quality.
At molten aluminum temperatures, hydrogen can dissolve in liquid aluminum. During solidification, the solubility of hydrogen decreases significantly. Excess dissolved hydrogen may then contribute to gas porosity in the final casting.
Rotary degassing removes dissolved hydrogen by introducing a controlled flow of inert gas, typically argon or nitrogen, into the molten aluminum.
The process works as follows:
- A rotating graphite or ceramic-coated rotor is immersed in the molten aluminum.
- Inert gas is supplied through the rotating shaft and discharged through the rotor.
- The rotating impeller breaks the gas into smaller bubbles and distributes them throughout the melt.
- Dissolved hydrogen diffuses from the liquid aluminum into the inert gas bubbles.
- The hydrogen-containing bubbles rise toward the melt surface and escape into the atmosphere.
The basic principle is mass transfer driven by the difference in hydrogen partial pressure between the molten aluminum and the inert gas bubbles.
Smaller, well-dispersed bubbles generally provide a larger gas-metal interfacial area, improving the opportunity for hydrogen transfer.
However, effective degassing depends on more than rotor speed or gas flow rate. It also depends on bubble size, residence time, melt depth, vessel geometry, temperature, gas purity, and the movement of the liquid metal.
1.2 Why the effect of degassing is not permanent
Rotary degassing removes dissolved hydrogen that is already present in the melt. It does not eliminate the possibility of new hydrogen entering the aluminum afterward.
Once the inert gas bubbles leave the melt, the liquid aluminum remains exposed to potential sources of hydrogen.
The most important source is atmospheric moisture.
Water vapor can react with molten aluminum according to the following simplified reaction:
2Al + 3H₂O → Al₂O₃ + 6[H]
Here, [H] represents atomic hydrogen that can dissolve into the aluminum melt.
This reaction explains why moisture control is essential throughout melting, holding, degassing, transportation, and casting.
A melt can therefore achieve a satisfactory hydrogen level immediately after rotary degassing but gradually deteriorate during subsequent processing.
The effectiveness of an aluminum degassing system must be evaluated not only by the hydrogen concentration at the equipment outlet but also by the quality of the metal immediately before casting.
2. Seven Reasons Why Hydrogen Content Increases Again After Rotary Degassing
In actual aluminum production, hydrogen reabsorption rarely results from one isolated factor. It is usually associated with several interacting conditions.
2.1 Moisture in the atmosphere surrounding molten aluminum
Atmospheric humidity is one of the most important factors affecting hydrogen pickup.
When molten aluminum is exposed to humid air, water vapor can react with the metal surface, producing aluminum oxide and atomic hydrogen.
The hydrogen can subsequently enter the liquid metal.
This problem becomes particularly noticeable when:
- The relative humidity in the production environment is high.
- Molten aluminum remains exposed in an open holding furnace.
- The degassing chamber has no effective surface protection.
- Metal is transferred through uncovered equipment.
- The production line operates with long waiting periods.
The amount of hydrogen absorbed depends on more than relative humidity alone. Melt temperature, exposed surface area, exposure time, and the condition of the melt surface also influence the process.
Engineering recommendation:
Minimize unnecessary exposure of molten aluminum to humid air. Use suitable covering practices, maintain stable furnace conditions, and reduce the time between degassing and casting.
Where appropriate, a properly selected covering flux can help create a protective layer over the molten metal.
2.2 Wet refractory linings, holding furnaces, and transfer equipment
Another frequently overlooked source of hydrogen is moisture trapped inside refractory materials.
Refractory linings, ladles, launder systems, furnace repairs, ceramic components, and other metal-contact equipment can absorb moisture during storage, shutdown, maintenance, or exposure to humid environments.
When these components come into contact with molten aluminum, residual moisture can release water vapor.
That vapor may react with the molten aluminum and contribute to hydrogen pickup.
Particular attention should be paid to:
- Newly installed or repaired furnace linings.
- Ladles stored in damp environments.
- Launders that have not been adequately dried.
- Wet or improperly preheated ceramic components.
- Refractory repairs performed shortly before production.
- Insufficiently dried tools and metal-contact accessories.
A furnace may operate at a sufficiently high temperature while moisture remains trapped in deeper refractory layers.
Simply heating the outer surface does not necessarily guarantee that the entire lining is dry.
Engineering recommendation:
Establish documented drying and preheating procedures for furnaces, ladles, launder systems, and other metal-contact components.
Follow the refractory supplier's recommended heating schedule rather than relying only on surface temperature measurements.
2.3 Excessive turbulence during metal transfer
Excessive turbulence is another important reason why hydrogen content and overall melt quality may deteriorate after degassing.
Rotary degassing requires controlled mixing to distribute inert gas bubbles throughout the melt. However, excessive surface agitation can create a different problem.
When the molten aluminum surface becomes unstable, the existing oxide layer can break, fold, and become entrained inside the liquid metal.
This can introduce oxide bifilms and trapped atmospheric gas into the melt.
Large vortices, uncontrolled pouring, excessive falling heights, and turbulent transfer can accelerate these problems.
The distinction between useful mixing and harmful turbulence is critical.
During rotary degassing, sufficient internal circulation is necessary for effective bubble dispersion. However, the melt surface should not become excessively disturbed.
After degassing, unnecessary agitation should be minimized.
Typical situations that require investigation include:
- Excessive rotor speed.
- Inappropriate inert gas flow rate.
- Incorrect rotor immersion depth.
- Poorly designed transfer channels.
- Significant metal falling heights.
- Uncontrolled pouring into ladles or casting equipment.
- Sharp changes in launder direction or cross-sectional area.
Engineering recommendation:
Optimize rotor speed, gas flow, and immersion depth according to the actual furnace geometry and production conditions.
For downstream transfer, prioritize stable metal flow, smooth transitions, suitable channel dimensions, and reduced exposure to the atmosphere.
The objective is not simply to move the molten aluminum faster. It is to transport the metal without unnecessary oxidation, gas absorption, and inclusion entrainment.
2.4 Excessive holding time between degassing and casting
The time between degassing and casting is a critical process variable.
A low hydrogen measurement immediately after treatment does not guarantee that the melt will maintain the same hydrogen concentration after an extended holding period.
As time passes, molten aluminum continues interacting with its surrounding atmosphere and equipment.
If the melt is insufficiently protected, hydrogen can gradually enter the liquid metal.
The risk is particularly important in production lines where:
- Degassing is performed in batches.
- Casting machines experience frequent interruptions.
- Molten aluminum is transferred to intermediate holding furnaces.
- Production scheduling creates long waiting periods.
- Multiple casting machines share one upstream metal treatment system.
Consider a typical production situation:
A foundry performs rotary degassing and obtains satisfactory results. However, the casting line is temporarily stopped because of mold maintenance.
The treated aluminum remains in the holding furnace for an extended period.
When production resumes, the melt may have a higher hydrogen level than immediately after degassing.
This does not necessarily mean that the degassing machine failed. The problem may have occurred during the downstream holding stage.
Engineering recommendation:
Establish a maximum permissible holding interval based on actual alloy, furnace conditions, melt protection, and measured hydrogen stability.
Avoid assuming that a degassed melt can remain in an open holding furnace indefinitely without quality deterioration.
Where possible, coordinate degassing with the actual casting schedule.
2.5 Moisture or contamination in the inert gas supply
Argon and nitrogen are widely used as purge gases for rotary degassing.
However, specifying an inert gas does not automatically guarantee that the gas entering the rotor is sufficiently dry and clean.
Moisture can enter the gas supply system through:
- Poor-quality gas.
- Contaminated or damaged pipelines.
- Moisture remaining inside hoses and connections.
- Improperly maintained gas regulators.
- Leaking gas distribution components.
- Inadequate gas drying and filtration systems.
If moisture-containing gas enters the molten aluminum, the intended degassing process may become less effective.
The gas may also introduce unwanted contamination rather than providing the clean bubble environment required for efficient hydrogen removal.
Gas purity at the supply source and gas quality at the degassing unit should therefore be considered separately.
Engineering recommendation:
Check the gas supplier's specifications, pipeline condition, pressure stability, dew point, and gas quality at the actual point of use.
Regularly inspect gas lines, valves, filters, regulators, and rotary connections.
Do not assume that replacing a cylinder or increasing gas pressure will solve an underlying moisture problem.
2.6 Excessive melt temperature and prolonged overheating
Melt temperature influences hydrogen solubility and the overall behavior of molten aluminum.
Hydrogen is more soluble in liquid aluminum than in solid aluminum, and its solubility increases as the temperature of the liquid metal rises.
Excessively high melt temperatures can therefore increase the potential for hydrogen pickup and create additional opportunities for oxidation during prolonged exposure.
A typical problem occurs when production departments maintain a higher-than-necessary holding temperature to compensate for heat losses during long-distance transportation or extended waiting periods.
This may introduce several disadvantages:
- Increased interaction between molten aluminum and atmospheric moisture.
- Greater oxidation potential.
- Higher energy consumption.
- Increased exposure time at elevated temperatures.
- Potential deterioration of melt cleanliness.
Temperature should not be considered the only cause of regassing. A high temperature alone does not automatically introduce hydrogen. However, when combined with moisture exposure and prolonged holding, it can aggravate the problem.
Engineering recommendation:
Maintain the temperature required by the actual alloy and casting process.
Avoid unnecessary overheating and establish consistent temperature monitoring at the furnace outlet, degassing chamber, holding furnace, and casting equipment.
2.7 Wet charge materials, alloy additions, and improper flux handling
Hydrogen problems may also originate before the molten aluminum enters the rotary degassing unit.
Wet or contaminated charge materials can introduce moisture and hydrogen-producing substances into the melting process.
Typical sources include:
- Scrap aluminum stored outdoors.
- Wet aluminum returns.
- Charge materials contaminated with oil or organic residues.
- Moist alloying materials.
- Damp tools used during metal additions.
- Fluxes stored in humid conditions or handled improperly.
This is especially important for secondary aluminum producers, where incoming scrap conditions can vary significantly.
An additional treatment cycle may reduce hydrogen concentration temporarily, but it will not solve continuous hydrogen pickup if contaminated materials keep entering the melt.
Engineering recommendation:
Implement incoming material inspection, appropriate drying procedures, proper flux storage, and controlled charging practices.
Select fluxes according to their specific refining, covering, or drossing functions.
Flux should complement the degassing process rather than substitute for proper moisture management.
3. Is Hydrogen Really Increasing, or Is the Measurement Result Changing?
Not every increase in a post-degassing test result means that the dissolved hydrogen concentration has actually increased.
This distinction is especially important when production personnel use the Reduced Pressure Test (RPT) to evaluate molten aluminum quality.
3.1 Direct hydrogen measurement versus Reduced Pressure Test
Two commonly used approaches provide different types of information.
Direct hydrogen measurement
Dedicated hydrogen analyzers can measure dissolved hydrogen in molten aluminum. Depending on the instrument, the result is commonly expressed in mL H₂/100 g Al.
This method is useful for tracking changes in hydrogen concentration before and after degassing.
Reduced Pressure Test (RPT)
The RPT evaluates the tendency of molten aluminum to develop porosity during solidification under reduced pressure.
A molten aluminum sample is solidified under vacuum and compared with a reference sample solidified under atmospheric pressure.
The difference in density is used to calculate the Density Index (DI).
A commonly used expression is:
DI (%) = [(Density in air − Density under vacuum) / Density in air] × 100
A higher DI generally indicates poorer melt quality.
However, an important technical distinction must be understood:
RPT is not a direct measurement of dissolved hydrogen concentration.
Its result is influenced by both dissolved hydrogen and oxide bifilms or other entrained defects that contribute to porosity formation.
Therefore, an increase in DI does not necessarily represent an equivalent increase in hydrogen concentration.
3.2 Why RPT results may vary
RPT results can fluctuate because of differences in:
- Sampling location.
- Sampling temperature.
- Sampling time after degassing.
- Sample handling.
- Sample solidification conditions.
- Vacuum pressure and test equipment condition.
- The amount of oxide inclusions present in the sample.
- Operator procedures and repeatability.
For example, a sample collected directly after degassing may have a lower DI than one collected after turbulent transfer, even if the change in dissolved hydrogen is relatively small.
This may indicate that downstream handling introduced additional oxide bifilms or entrained gas.
Comparing DI results without understanding these differences can lead to incorrect conclusions about degassing efficiency.
3.3 A better approach to monitoring hydrogen stability
For reliable process analysis, aluminum foundries should combine direct hydrogen measurement with RPT evaluation whenever production requirements justify both methods.
The following sampling locations are particularly useful:
| Sampling Point | Main Purpose |
|---|---|
| Before rotary degassing | Establish initial melt condition |
| Immediately after degassing | Evaluate hydrogen removal efficiency |
| After holding | Evaluate hydrogen stability during storage |
| After transfer through the launder | Identify downstream quality deterioration |
| Before casting | Confirm final melt quality |
All measurements should be performed using consistent procedures and documented temperatures and sampling conditions.
This approach helps determine whether the problem originates inside the degassing chamber or develops later in the production line.
4. How to Prevent Hydrogen Reabsorption After Rotary Degassing
Preventing hydrogen pickup requires a coordinated approach covering melt treatment, equipment condition, metal transportation, and production management.
The following measures provide a practical framework.
4.1 Optimize rotary degassing parameters
The main operating parameters include:
- Rotor speed.
- Inert gas flow rate.
- Rotor immersion depth.
- Treatment time.
- Melt temperature.
- Melt volume.
- Furnace geometry.
- Bubble dispersion and circulation conditions.
Increasing rotor speed or gas flow does not necessarily improve the final melt quality.
Excessive agitation may create surface turbulence, entrain oxide films, and reduce process stability.
The correct operating window should be determined through actual hydrogen measurements and melt-quality testing rather than relying on a universal RPM or gas flow setting.
Rotor wear should also be monitored because changes in rotor geometry and gas distribution can reduce treatment efficiency.
4.2 Maintain dry and clean metal-contact equipment
All equipment that comes into contact with molten aluminum should be properly prepared.
This includes:
- Melting and holding furnaces.
- Ladles.
- Rotary degassing chambers.
- Launder systems.
- Ceramic foam filter housings.
- Filter plates and other ceramic components.
- Metal transfer tools.
Drying and preheating procedures must follow the specific equipment and refractory manufacturers' instructions.
Particular attention should be paid to equipment following maintenance or prolonged shutdown periods.
4.3 Reduce exposure between degassing and casting
A well-designed production line should minimize the distance, waiting time, and unnecessary handling between degassing and casting.
For continuous casting and aluminum rolling applications, online degassing and filtration systems can help maintain more consistent melt treatment conditions.
The benefits include:
- Reduced unnecessary metal transfers.
- More stable treatment conditions.
- Better coordination between melt processing and casting.
- Reduced exposure of molten aluminum to humid air.
- Improved control over downstream melt quality.
The objective is to treat the aluminum at the appropriate position in the production line and deliver it to the casting equipment under controlled conditions.
4.4 Use suitable covering flux to protect the melt surface
Covering flux has an important role in controlling molten aluminum oxidation and reducing direct exposure of the metal surface to the surrounding atmosphere.
A suitable covering flux forms a protective layer over the molten bath.
This can help reduce oxidation and the opportunity for moisture interaction.
However, different flux formulations have different functions.
Covering flux, drossing flux, and refining flux should not be treated as interchangeable products.
Covering flux is intended primarily to protect the melt surface. Refining flux formulations may serve different purposes, including impurity treatment and melt cleaning.
Flux selection should consider alloy composition, temperature, processing method, and the desired refining result.
Flux application does not eliminate the need for effective rotary degassing.
4.5 Combine degassing and ceramic foam filtration
Hydrogen removal and inclusion removal are two different aspects of molten aluminum purification.
Rotary degassing primarily reduces dissolved hydrogen.
Ceramic foam filters primarily capture non-metallic inclusions, such as oxide particles and other suspended contaminants.
A ceramic foam filter does not function as a substitute for hydrogen degassing. Dissolved hydrogen cannot simply be removed by passing molten aluminum through a conventional ceramic foam filter.
However, combining the two processes provides a more comprehensive melt treatment solution.
A typical treatment sequence is:
Melting and alloy adjustment → Rotary degassing → Ceramic foam filtration → Controlled transfer → Casting
In this arrangement:
- Rotary degassing reduces dissolved hydrogen.
- Ceramic foam filtration captures suspended non-metallic inclusions.
- Properly designed transfer equipment helps maintain melt cleanliness.
- Controlled casting conditions reduce the opportunity for subsequent contamination.
Alumina ceramic foam filters are widely used in aluminum casting because they provide a porous filtration structure suitable for removing non-metallic inclusions.
AdTech China supplies alumina ceramic foam filters in different pore densities and dimensions to meet different aluminum filtration requirements.
The filter selection should be matched to alloy characteristics, metal flow rate, casting requirements, and the expected inclusion load.
Proper filter storage, installation, and preheating are also important for preventing moisture-related problems.
5. Why Aluminum Launder Design Matters After Degassing
One area that is frequently underestimated in melt-quality management is the aluminum launder system.
A foundry may invest in an advanced rotary degassing machine but still experience hydrogen pickup and inclusion-related problems if the downstream transfer system is poorly designed.
The launder is not simply a channel for transporting molten aluminum. It is an important part of the overall melt quality control system.
Poor launder design can result in:
- Excessive surface exposure.
- Uncontrolled metal turbulence.
- Sudden changes in metal flow direction.
- Excessive metal falling height.
- Unnecessary temperature loss.
- Oxide film formation and entrainment.
- Additional opportunities for contamination.
An effective aluminum launder system should consider the following factors.
Controlled metal flow
The channel geometry should provide stable metal movement without unnecessary splashing or turbulence.
Thermal management
Suitable insulation and heating arrangements help maintain the temperature required by the casting process.
Reduced atmospheric exposure
Appropriate covers and system configurations can reduce direct contact between molten aluminum and humid air.
Suitable integration with filtration equipment
Filter boxes and filtration chambers should be correctly positioned and designed for the required metal flow rate.
Easy maintenance
The system should allow inspection, cleaning, refractory maintenance, and replacement of consumable components.
AdTech China provides aluminum melt handling and filtration equipment, including integrated launder systems and related casting accessories.
For aluminum manufacturers experiencing recurring hydrogen pickup or melt cleanliness problems after degassing, reviewing the entire transfer system may be more effective than repeatedly increasing the degassing treatment time.
6. How AdTech China Helps Aluminum Foundries Maintain Stable Melt Quality
Maintaining low hydrogen content is not simply a matter of purchasing a more powerful degassing machine.
It requires coordinated control of hydrogen removal, inclusion filtration, melt protection, metal transportation, and casting conditions.
AdTech China is a Chinese manufacturer specializing in molten aluminum purification and aluminum casting process equipment.
Founded in 2012 and located in Wen County, China, AdTech focuses on removing micron-level harmful impurities and improving molten aluminum quality for aluminum casting and rolling applications.
Its product portfolio covers several important stages of the molten aluminum treatment process.
6.1 Rotary and online molten aluminum degassing systems
AdTech China supplies molten aluminum degassing equipment designed to reduce dissolved hydrogen before casting.
Rotary degassing uses inert gas injection and rotating impellers to distribute gas bubbles throughout the melt.
Depending on production requirements, the equipment configuration can be selected according to:
- Molten aluminum capacity.
- Alloy type.
- Required treatment throughput.
- Furnace dimensions.
- Gas supply conditions.
- Process layout.
- Required hydrogen removal performance.
For continuous production lines, online degassing solutions can be integrated into the molten aluminum processing route to improve treatment consistency.
6.2 Alumina ceramic foam filters
AdTech China manufactures alumina ceramic foam filters for molten aluminum filtration.
These filters are designed to remove suspended non-metallic inclusions and improve melt cleanliness before casting.
Available filter configurations can be selected according to different casting requirements, including pore density, dimensions, and filtration capacity.
AdTech also provides phosphorus-free ceramic foam filters (PHF), developed for applications where phosphorus-related contamination needs to be controlled.
The ceramic foam filtration stage complements hydrogen removal by addressing a different source of melt-quality problems: suspended inclusions.
6.3 Aluminum filtration equipment
AdTech China provides different filtration equipment configurations for molten aluminum processing, including:
- Electric heating plate-type filtration equipment.
- Gas-heated filtration equipment.
- Deep bed filtration equipment.
- Cartridge filtration equipment.
- Integrated launder systems.
Different filtration arrangements can be selected according to casting technology, required metal throughput, and the desired filtration performance.
For aluminum manufacturers producing high-quality billet, slab, sheet, foil stock, and other aluminum products, filtration equipment should be selected as part of the overall melt purification strategy.
6.4 Aluminum fluxes and melt protection products
AdTech China also supplies aluminum flux products for different molten metal treatment requirements.
These include:
- Covering flux.
- Drossing flux.
- Refining flux.
- Furnace cleaning flux.
- Granular flux.
- Recycling flux.
The appropriate flux depends on the specific metallurgical purpose.
Covering flux helps protect the molten metal surface, while drossing and refining products serve their respective melt-treatment functions.
Selecting the appropriate flux and using it correctly can support the overall control of oxidation, inclusions, and melt cleanliness.
6.5 Integrated molten aluminum purification solutions
For aluminum manufacturers experiencing hydrogen reabsorption, unstable RPT results, excessive oxide inclusions, or inconsistent casting quality, AdTech China can provide equipment and product combinations based on the actual production process.
Rather than evaluating degassing, filtration, flux treatment, and metal transportation as isolated operations, a more effective approach is to examine the complete molten aluminum treatment route.
This may involve:
- Reviewing the existing melting and holding arrangements.
- Evaluating the rotary degassing process.
- Checking the filtration system and filter selection.
- Examining launder design and downstream transfer conditions.
- Reviewing flux application and melt protection.
- Identifying opportunities to improve process integration.
The objective is to achieve stable molten aluminum quality from the melting stage through final casting.
7. A Practical Troubleshooting Checklist for Hydrogen Reabsorption
When hydrogen content increases after rotary degassing, aluminum foundry engineers should investigate the process systematically rather than immediately repeating degassing treatment.
The following checklist can be used during production troubleshooting.
| Inspection Area | Key Questions | Recommended Action |
|---|---|---|
| Atmospheric humidity | Is the melt exposed to humid air? | Improve melt protection and reduce exposure |
| Furnace lining | Is the refractory completely dry? | Review drying and preheating procedures |
| Ladles and launders | Are metal-contact surfaces dry and clean? | Inspect and maintain transfer equipment |
| Inert gas supply | Is the gas sufficiently dry and clean? | Verify gas quality and dew point |
| Rotor condition | Is gas distribution still effective? | Inspect rotor wear and condition |
| Rotor operation | Is excessive surface turbulence occurring? | Optimize RPM and gas flow |
| Holding time | Is the melt waiting too long after treatment? | Coordinate degassing and casting |
| Temperature | Is the melt unnecessarily overheated? | Maintain the required process temperature |
| Flux handling | Are flux materials dry and correctly selected? | Improve storage and application |
| Filtration | Are oxide inclusions entering the casting process? | Review filter selection and installation |
| Measurement | Are sampling and test conditions consistent? | Standardize hydrogen and RPT testing |
Recommended process monitoring strategy
For a more reliable evaluation, establish a melt quality monitoring record containing:
- Alloy grade.
- Furnace identification.
- Melt temperature.
- Initial hydrogen concentration.
- Rotary degassing start and finish times.
- Rotor speed.
- Inert gas flow rate.
- Hydrogen concentration immediately after treatment.
- Holding time.
- Hydrogen concentration before casting.
- RPT Density Index.
- Environmental and equipment conditions.
After collecting sufficient production data, the foundry can identify the relationship between degassing conditions, holding time, transfer conditions, and final melt quality.
This is more reliable than adjusting machine parameters based on isolated test results.
8. Frequently Asked Questions About Hydrogen Increasing After Aluminum Degassing
Q1. Can hydrogen content increase again after rotary degassing?
Yes. Molten aluminum can absorb hydrogen again after successful rotary degassing.
The main cause is exposure to atmospheric moisture, which reacts with the molten aluminum surface and introduces hydrogen into the melt.
Wet refractory materials, contaminated gas supplies, turbulent transfer, and extended holding times can also contribute to hydrogen pickup.
Q2. How long does molten aluminum maintain its hydrogen level after degassing?
There is no universal holding time applicable to every aluminum foundry.
Hydrogen stability depends on atmospheric humidity, melt temperature, alloy composition, surface protection, furnace conditions, and transfer equipment.
Some research has demonstrated measurable changes in melt quality within an hour after degassing under specific experimental conditions.
Therefore, foundries should establish their own acceptable holding intervals through actual hydrogen measurements and casting quality validation.
Q3. Does increasing rotary degasser RPM improve hydrogen removal?
Not necessarily.
Higher rotor speeds may improve gas dispersion under certain conditions, but excessive rotation can create strong surface turbulence and promote oxide entrainment.
The optimum rotor speed depends on rotor geometry, furnace dimensions, metal volume, gas flow, and the required melt quality.
Stable bubble distribution and controlled surface conditions are more important than simply maximizing RPM.
Q4. Can argon prevent hydrogen reabsorption?
Argon is an inert purge gas commonly used to remove dissolved hydrogen during rotary degassing.
However, argon does not permanently protect the molten aluminum after treatment.
If the melt is subsequently exposed to humid air or wet equipment, hydrogen can enter the metal again.
Dry purge gas, appropriate melt protection, and controlled transfer remain necessary.
Q5. Does a ceramic foam filter remove dissolved hydrogen from molten aluminum?
No. Conventional ceramic foam filters are primarily designed to capture suspended non-metallic inclusions, not dissolved hydrogen.
Hydrogen removal requires a suitable degassing process, such as rotary inert gas degassing.
The two technologies perform complementary functions and can be combined to improve overall molten aluminum quality.
Q6. Can covering flux reduce hydrogen pickup after degassing?
A suitable covering flux can help protect the molten aluminum surface by forming a covering layer that reduces direct exposure to the surrounding atmosphere.
This can help limit oxidation and moisture interaction.
However, covering flux does not replace rotary degassing and cannot compensate for wet refractory materials, contaminated gas, or uncontrolled transfer conditions.
Q7. Why does the RPT Density Index increase after degassing even when the hydrogen analyzer shows little change?
The RPT Density Index is influenced by both dissolved hydrogen and oxide bifilms or other defects that contribute to porosity during solidification.
If the direct hydrogen measurement remains relatively stable but the Density Index increases, the melt may have experienced deterioration in cleanliness, such as additional oxide entrainment during transportation or holding.
Sampling differences and test repeatability should also be investigated.
Q8. Should aluminum be degassed twice if hydrogen content increases before casting?
Repeated degassing may be necessary when the melt no longer meets the required hydrogen specification.
However, the original source of hydrogen pickup should first be identified.
Otherwise, repeated treatment may only temporarily reduce hydrogen while the same moisture exposure, transfer, or holding problem continues.
A better approach is to correct the source of regassing and then optimize the degassing process.
Q9. What is the most effective way to prevent hydrogen reabsorption in an aluminum casting line?
The most effective approach is integrated melt quality management.
This includes properly optimized rotary degassing, dry refractory equipment, clean inert gas, suitable covering flux, controlled holding time, stable aluminum launder systems, and effective ceramic foam filtration.
Each stage should be designed to prevent the melt from deteriorating after the initial hydrogen removal process.
9. Conclusion: Successful Degassing Means Maintaining Melt Quality Until Casting
Hydrogen content increasing again after rotary degassing is not necessarily evidence of degassing equipment failure.
In many aluminum foundries, the real problem occurs after the treatment process, when molten aluminum is exposed to moisture, wet equipment, excessive turbulence, or prolonged holding conditions.
A successful melt purification strategy must therefore address two separate objectives:
First, remove the dissolved hydrogen already present in the molten aluminum.
Second, prevent the treated aluminum from absorbing hydrogen or becoming contaminated again before casting.
Rotary degassing, ceramic foam filtration, appropriate flux application, and properly designed aluminum launder systems each serve different but complementary functions.
For manufacturers producing aluminum billets, slabs, rolling stock, and high-quality aluminum castings, combining these technologies with reliable process monitoring provides a more effective approach to controlling hydrogen porosity and improving production consistency.
AdTech China provides molten aluminum purification equipment, rotary and online degassing systems, alumina ceramic foam filters, phosphorus-free filters, filtration equipment, aluminum fluxes, and integrated aluminum casting accessories.
By considering the entire molten aluminum treatment process rather than focusing on degassing alone, aluminum manufacturers can develop more stable melt quality control systems and reduce the risk of hydrogen reabsorption before casting.
Contact AdTech China
For technical discussions, equipment selection, product specifications, and molten aluminum purification solutions:
Email: [email protected]
WhatsApp: +86 15237123176
AdTech China – Your Partner in Molten Aluminum Filtration and Purification Solutions.
