Ways to pick a floating fish feed making machine
Author : Nguyen Carter | Published On : 17 Apr 2026
In the last few years, with the rapid advancement of the economic situation, the floating fish feed making machine has followed closely, and also the fish feed pellet machine has actually been demanded by everyone. Then there is an issue, that is, just how to pick the floating fish feed making machine Allow's examine the three approaches of picking a fish feed pellet machine.1. pellet mill in Sao Tome and Principe to choose a floating fish feed making machine.
( 1) Look top quality.
The spray paint on the surface of the covering of the floating fish feed making machine needs to be consistent as well as company, and there should be no paint leak, sagging and also falling off. The chrome-plated parts must be firm as well as brightly sleek, free from peeling off and also corrosion. Stainless-steel parts should have a smooth surface, no bumps, as well as must be processed with cool sleek patterns.
( 2) Assembly and also attachment
Along with examining the fastening of the body and also the framework, the electric motor (or diesel engine) as well as the chassis, the floating fish feed making machine generally examines the setting up quality of the template locking nut and the pellet cutter, as well as the ring die floating fish feed making machine mainly checks Whether the fastening screws of the template are tightened up. And examine the rigidity of the pinch roller bracket and also squeeze roller.
( 3) Change the void between the die as well as the stress roller wall surface.
2 layers of paper are packed between the stress roller as well as the internal wall surface of the ring die, as well as it can be taken out with a little force. After change, be sure to tighten the adjusting nut in time as well as set up the safety cover.
After validating that there are no foreign things in the guard and also the ring die, transform the ring die by hand. Right now, the driven spindle ought to rotate quickly, and also there is no sticking phenomenon or scrubing sound.
2. Notes:
Straight observe whether there is whipping of the floating fish feed making machine ring die during rotation as well as whether it will certainly rub versus other components. Open the observation port for feeding the powder into the twisting cage as well as inspect whether there is any kind of contaminant in the twisting cage.
Rotate the cage shaft by hand, the cage shaft need to turn efficiently and also there is no rubbing sound. Continuously open as well as shut the ring-molded storage facility door to examine whether it is easy to open and also close and also firmly shut.
Certain attention should be paid to examining the rigidity of the joint and also the dependability of the locking. The basic demands are: exact positioning, firm locking, and no leak of powder.
After locking journalism chamber door, observe the seam seal of the chamber door from the side. If there is an area where the seal is not tight, the fixing bolts of the door hinge of the storehouse can be adjusted to successfully prevent the leakage of powder.
3. Introduction of floating fish feed making machine
The floating feed extruder machine is a feed processing machine that straight presses pellets from crushed products such as corn, soybean meal, straw, grass, rice husk, etc( 1) Category of floating fish feed pellet machine
Floating fish feed making machine can be split right into ring die pellet machine, ring die pellet machine and counter-roll pellet machine; according to production, it can be split into: straw feed pellet machine, wheat bran feed pellet machine, soybean dish feed pellet machine, corn straw feed pellet machine, Sawdust feed pellet machine, etc.
A range of various floating fish feed making machines are classified according to their look and also manufacturing techniques.
( 2) Main efficiency characteristics of floating fish feed machine
Double shaft differential stainless steel conditioner, approximately 12 points of steam and also 6 factors of fluid addition;
Integrated pin, simple to preserve and repair the bearing housing;
The screw and the major shaft are attached by involute splines, which are very easy to readjust and also change;
The barrel is installed with a wear-resistant bushing and also is geared up with a return water network, which can be heated/cooled, as well as can additionally directly inject heavy steam or cold water into the barrel;
Spiral made of special wear-resistant product, huge element ratio can make certain constant and steady production of sinking/floating feed of numerous pellet sizes;
Practical and quick die substitute mechanism and also online adjustable reducing device;
Particularly ideal for the production of 2 ~ 6mm floating pellets.
After the product is extruded by the floating fish feed making machine, it will create soft as well as soft pellets (the dampness content is 25%~ 30%). Currently, it is better to make use of pneumatic sharing rather than lift.
Since using lifts can quickly trigger the pellets to be broken as well as enhance the pulverization price; using pneumatically-driven conveying can not just rapidly develop a layer of colloidal coating externally of the pellets to reduce the fragmentation of the pellets, but likewise round the form of the pellets.
Because of its high moisture material, the product communicated by pneumatically-driven should enter the dryer for drying out, so that the wetness material of the product is decreased to concerning 13%.
I hope the above relevant material regarding floating fish feed making machine is valuable to you. For more details regarding floating fish feed pellets machine, you rate to seek advice from the staff of Richi Machinery, we will offer you wholeheartedly!
