Watch Out: How Electric Heater Is Taking Over And What To Do About It
Author : Salling Desai | Published On : 23 May 2024
How to Select Electric HeatersElectric heaters offer a variety of advantages they offer, including low initial costs, minimal maintenance for homeowners and efficient heating. They are also easier to use than heating systems that require venting.
You can save money on heating expenses if you have an electricity provider that provides Economy 7.
Temperature Settings
Ideal is that your electric heater allows you to set and maintain the temperature you want without needing to turn it off or off. This will cut energy usage and help you avoid entering an area that's too cold or leaving one that's too hot. Look for a thermostat, and if you can, one with timer functions.
When selecting an electric heater, be certain that it's designed for the space you have. A heater that's too small will have to run for longer in order to reach the desired temperature. This is a waste of energy and can cause your room to overheat. Utilize our calculator to determine the right size of heater for your space in terms of the watts per square. foot.
Also, make sure the knobs for temperature adjustment are easy to adjust and reach. If the knobs are recessed you may need to remove screws and remove insulation to reach them, which could be tricky. It is also essential to verify the recommended temperature range to ensure safety and efficiency. Temperatures lower than 120 degrees could cause the growth of bacteria and increase the risk of burning. Temperatures above 140 degrees can pose an hazard to fire.
The Everhot is a beautiful, compact heater that can be utilized in conservatories or, as the company describes it: "annexes... narrow boats... shepherds' shelters... Glamping pods." It reaches 200C, making it a good choice for cooking as well as heating. It has a timer and an ECO mode that optimizes the power and heat settings to be more energy-efficient.
It's also quiet. There's no noise from fans or whirring sound when you change the settings. This makes it an excellent option for bedrooms and living rooms. It also comes with a few additional features that are useful, like an inbuilt nightlight that turns blue when the heater is on and a built-in humidifier that can be set to an intermittent mist mode to provide a more subtle effect. It's also sturdy and safe and comes with a tip-over shutdown switch and overheating protection that shuts down the unit if it gets too hot. It's also registered with UL for safety.
Safety
When using electric heaters, it's important to take the appropriate safety precautions. Children, the elderly and people suffering from chronic diseases or immune system disorders are at a greater risk of getting poisoned from carbon monoxide as well as fire hazards created by heaters. In addition, children and pets can knock over a heater, leading to injury or death.
ESFI suggests checking a heater's plug, cord and outlet periodically. Check for heaters electric fires of damage such as cracks in the plug, a loose cord or if the plug is damaged or loose. If the outlet or cord is hot, you should stop using it and contact a qualified electrician to replace it. Don't plug multiple electrical devices into the same outlet using a space heater because it could cause overload and result in overheating.
It's a good idea to use heaters that have been approved or identified by a nationally-recognized testing laboratory, such as UL. These heaters are more likely to be in compliance with the voluntary safety standards. Also, never place a heater on flame-prone surfaces, like rugs and textiles. Maintain a minimum of three feet safety clearance between the heater and any combustible materials. Additionally, do not put heaters in the bathroom or kitchen and do not be near it if you're soaking wet.
Also, make certain to plug an electric heater directly into a wall outlet and not an power strip or extension cord. If you have to use an extension cord, make sure you choose the shortest one that is heavy-duty and constructed with 14 gauge wire. Also, check for any weak outlets which could be an indication of a circuit that is overloaded.
Keep the electric space heater at least six inches from anything that could ignite. Place the heater on an unburnable, flat surface instead of on furniture, cabinets or tables, which could overheat. The last thing to do is disconnect and shut off the heater before you leave the room.
Electric heaters are a great way to reduce energy consumption and reduce the risk of injuries. As temperatures drop, facility managers often turn to electric heaters to provide extra warmth in office areas and common areas. Preferred Climate Solutions installs and maintains outdoor or indoor electric heating systems to make your workplace as comfortable during the cold winter months as possible. Contact us for more information about heating solutions.
Energy Efficiency
Think about the energy efficiency of the portable heater before making your choice. This refers to the amount of energy required to achieve the desired output. Heating systems that consume less energy are more efficient and lower the cost of heating your business or home.
The heating element is utilized in most electrical heaters to convert electrical energy into warmth. It is usually made of a coil or ribbon, a flexible heater, or tubular element which emits heat when a current flows through it. The amount of heat produced is dependent on the type and method of heating element (convection radiation, convection).
If you are concerned about the environmental impacts, you should consider a model that uses an environmentally friendly form of energy. It could be an energy source that is renewable or a substitute for fossil fuels, such as wind or solar.
The energy efficiency of electric heaters is also influenced by where and how electricity is generated. Electricity that is sourced from a wind or solar power plant is more efficient than electricity that is derived from burning fossil fuels at a power station.
You should not only choose a heater that is an eco-friendly energy source, but one that comes with a number of energy-saving features. These might include automatic shut-off mechanisms in case of overheating or in the event that the unit is accidentally tipped over.
These safety measures can help to safeguard your employees or family members, and they can also contribute to lower energy bills by assisting you in avoiding excess usage. A majority of portable electric heaters operate quietly, which makes them ideal for bedrooms, offices, and other areas where you need a peaceful environment.
Electric heaters can also save money by reducing maintenance calls. Gas heaters are more costly to repair than electric models, and the cost of maintenance could add up over time. Electric models are typically less expensive to maintain and usually come with more advanced features to help you save money.
Installation
Electric heaters work on the Joule principle that converts electrical energy into radiant warmth that warms the room. Electric heaters are also more efficient and economical than other heating methods, especially gas. They aren't suitable for all households and can overburden an existing electric system. It is crucial to have an electrician inspect the system prior to installing the wall heater.
When selecting an electric heater, you need to consider several factors, including the size and type of the heater, as well as the room which it will be placed. The kind of heater you choose will determine how much it costs to operate. Electric baseboard heaters are more expensive to operate than space heaters or portable heaters, but they provide a more even heat and do not require chimneys or vents.
A fan heater with an electric motor has an air blower that produces hot air and then circulates it throughout the room. This type of electric heater is the least expensive, but can be noisy and takes longer to warm up rooms.
Choose the space heater with a built-in thermostat. This feature lets you to set a temperature target and the heater will shut off automatically when it gets to that temperature. This can drastically reduce your consumption of energy and keep you from having to turn the heater on and off.
Before you attempt to install an electric heater, ensure that the power is turned off at the breaker panel and ensure that the circuit is turned off by using a tester. Then, mark the spot where you'll be mounting the electric heater on the wall. Once you have marked the location, cut an opening for it in the drywall. Use a drywall cutter to cut off the needed section. Be careful not to scratch any electrical wires or pipes.
Run a cable 14/2 of the same gauge and length as the wires that are already in use from the breaker panel to the wall opening. Remove approximately 1 inch of insulation off the conductors' ends on each wire and connect them to an available screw in the outlet box. The wire you identify as the "line" by labeling it or marking it with a piece red tape, and connect it to the wire leads that are marked "load" in the thermostat box.
