Main features of marine floating feed machine
Author : Link Deleuran | Published On : 17 Feb 2026
Today, water floating feed machine technology is preferred in the production of aquafeeds, as it can be used to generate a range of feeds, whether floating or sinking, depending on the demands of each species. Additionally, the extruded feed made by marine floating feed machine has much less contamination as well as high performance, helping to enhance digestibility.Throughout the aquatic floating feed machine extrusion procedure, devices such as temperature level, moisture, stress will increase starch gelatinization, disintegrate as well as soften the cell wall surface as well as launch some quickly absorbable substances, hence advertising the food digestion and absorption of farmed animals.
Through marine floating feed machine extrusion innovation, it is possible to inhibit specific protease preventions (such as antitrypsin), damage microorganisms in resources or change protein properties to additional boost the contact with enzymes in fish and also shrimp, assisting to absorb food much more conveniently.
Extruded feed made by aquatic floating feed machine can control the material of compounds and help better cleansing. At the same time, the longer stablizing time in the water (12-36 hours) assists farmers to observe as well as regulate the feeding routine.
Although extruded feed made by floating fish feed making machine has apparent advantages over pelleted feed, the initial investment cost of extruded feed production is greater, resulting in greater feed expenses.
However, for premium fish farming, increasingly more individuals are taking note of the marketplace prospect of high-end fish feed.
1. Main features of water floating feed machine
Feeding, rotary cutting, as well as major drive all embrace frequency conversion speed regulation system, which has solid power, stable operation, power saving, high water manufacturing efficiency, sturdy devices, reduced failure rate, and also convenient operation and upkeep.
The screw of floating feed machine is made from alloy material by special procedure, the life span is 3-4 times longer than that of domestic comparable machines, and also the price of creating feed is reduced; the segmented consolidated screw is suitable for a large range of basic materials and also even more diverse products.
Automatic lubrication system of the floating feed machine decreases power intake as well as lengthens service life.
The feeding system embraces spiral forced feeding, and also the feeding is consistent and also large. feed pellet mill in State of Palestine can be outfitted with an automated feeding system. The feeder is a screw conveying variable frequency speed control to adjust the feeding total up to regulate the blowing outcome (measurable feeding, and also can properly stop the material from curving).
Direct bearing device adjustment system, adjust the tool properly and also promptly.
The twin-screw of floating feed machine has self-cleaning function, as well as using tools is a lot more practical and convenient.
Update the arrangement of different devices innovation and equipment to make the outcome of the twin-screw floating feed machine larger.
Various screws and also length-diameter proportions can satisfy various production processes.
Visual automated temperature level control system to make temperature control a lot more intuitive and criteria much more exact.
The total floating feed machine configuration The operation of the fish feed pellet extruder is extra intuitive and also the maintenance is more convenient.
Dry puffing process embraces self-heating approach without vapor system, which is more in accordance with the actual demands of customers.
No adhesive is needed to process the floating feed, and also it can maintain security in water for greater than 12 hrs.
Tiny and moderate equipment is specifically suitable for scientific research organizations, special reproduction farms or medium as well as tiny feed manufacturing facilities. There are also specifically customized experimental twin-screw floating feed machines offered for scientific research study systems.
2. The distinction in between pellet feed and extruded feed
With the advancement of the floating fish feed handling market, two widely utilized modern technologies currently used to generate aquafeed are pelleting and extrusion by floating feed machine Compared to all-natural lures, such feeds have greater dietary content and also security, much less wetness, easier storage, fewer virus, and longer storage space times.
Pelletizing by floating feed machine is a technique of compressing little pellets of basic material right into bigger pellets, throughout which moisture, temperature and also pressure can greatly impact the top quality of the feed.
Among the main benefits of pelleted feed is reduced manufacturing prices. However, it has some drawbacks.
Among the largest drawbacks of pelleted feed is that it sinks faster and also liquifies quickly in water (according to statistics, about 10-15% of feed is squandered), which means greater feed prices, lower farming earnings, and easier cause water contamination.
3. Select pellet feed or extruded feed?
Farmers, select pellet feed or extruded feed?
When selecting feed, farmers ought to consider the characteristics of different marine species and feeding behaviors. Since the practice of shrimps and also crabs is to discover food near the bottom, and after that eat the food slowly, so the food must not be as well hard as well as not quickly soluble in water.
For that reason, extruded sediment by floating feed machine is the best option because it is soft and also hard to dissolve in water, and it is convenient for shrimp and crab to eat, reducing feed waste as well as decreasing water contamination.
Especially in intensive shrimp farming, extruded feed ought to be leading, since it is easier for shrimp to absorb protein from extruded feed, which lessens feed waste as well as promotes far better protein absorption.
At the same time, we can additionally boost the absorption price of the feed by adding valuable bacteria or stimulating digestive system items to the feed.
However, from a lasting point of view, making use of extruded feed, which is made by floating feed machine will certainly boost the expense, and also if the fish usage extruded feed in the fully grown period, it might result in fish fat, huge stomach, poor stress ability, not appropriate for long-distance transport, and so on, resulting in a low cost at the time of sale.
As a result, in the process of aquaculture, when lots of farmers utilize feed, they typically use a mix of pellet feed and also squeezed out feed, which not only manages water quality, lowers feed residues, but additionally boosts efficiency as well as financial advantages.
At the same time, the aquaculture sector is advertising the more development of both feeds because of their respective advantages.
4. Installation of floating feed machine.
( 1) Installation of floating feed machine pipeline shelf
The selection of the installation setting of the pipeline shelf depends on the website location, yet it must not be as well much from the main engine. Much from the primary engine will certainly cause waste of materials during pipe link on the one hand, as well as cause the hysteresis of the control system on the other hand.
If the installation place on website permits, the most effective position of the pipe rack is to be directly behind the main engine and conditioner, alongside the primary engine, and also regarding 1 meter away from the major engine (there is a particular upkeep space), while making sure that the pipe rack is adjusted upwards. The setting of the heavy steam line interface of the conditioner gets on the side of the conditioner.
In order to promote the cleansing of the ground as well as the outflow of drainage in the future, the pipeline shelf must be raised by around 10 centimeters throughout installation. In the installation of each valve in the pipe, the placement of the valve wheel ought to fulfill the needs of practical procedure for floating feed machine.
( 2) Installment of floating feed machine control box
In order to help with the operation, the installment placement of the on-site control box need to be picked near the bypass, and also a particular room needs to be scheduled between the bypass as well as the control box to momentarily position the wastes moving from the bypass.
The distance in between the frequency converter of the reducing motor and also the rotary positioner of the on-site cutter need to not be also much. It is regulated by voltage. If the range is as well far, it will create voltage fluctuations as well as influence the cutting impact.
The circulating temperature level display screen instrument on the on-site control box is to show the temperature of each end of the puffing dental caries in real time, and the shown temperature level sequence has certain demands. Section 2 Expansion cavity ... up until the product discharge development cavity, this series needs to be paid attention to when circuitry the electric control.
Furthermore, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of floating feed machine. They control the opening of each nozzle via the electromagnetic cut-off valve.
The floating feed machine conditioner inlet nozzle switches 1 to 4 on the control box represent the conditioners The 1st nozzle to the 4th nozzle from the feed end.
