The 10-Step Track Renovation Guide Nobody Talks About

Author : jrace Carter | Published On : 25 Jun 2026

When people talk about track renovation, they usually skip straight to the new surface. But the most important work happens before that. Here are the ten steps that make or break a track renovation project.

1. Safety First — Set up barriers and warning signs. Protect everyone from construction hazards.

2. Check What Is Underground — Map all utilities. Disconnect or isolate lines in the construction zone.

3. Keep Dust Down — Spray water before and during demolition. Reapply frequently.

4. Remove the Old Surface — Use machines and hand tools to remove all old material.

5. Clean Up Glue — Scrape off raised adhesive. Leave flat adhesive that bonds well to the foundation.

6. Haul Away Waste — Remove debris regularly. Keep the site clean and organized.

7. Look at the Foundation — Walk the surface. Find water pooling, concrete cracks, and asphalt problems.

8. Fix Drainage — Fill low spots. Create slopes that direct water toward drainage points.

9. Repair the Foundation — Cut V-grooves in concrete cracks and fill with flexible compound. Install expansion joints. Replace damaged asphalt. Fix oil bleeding with full replacement.

10. Do a Final Check — Verify everything is even, drained, and solid before surfacing.

JRACE Sports is a professional manufacturer of running track systems, including cast-in-place, semi-precast, and prefabricated tracks. They also produce FIBA-certified courts and acrylic surfaces, with support from research to installation.