Stonebot Expands Its Upholstery and Fabric Cleaner Range to Four Models

Author : Makayla Nguyen | Published On : 11 Nov 2026

Stonebot has widened its upholstery and fabric cleaner range to four models, giving wholesale buyers a choice between hand-held spot work and full commercial extraction, all from the same factory-direct price sheet.

Sofas, mattresses and carpeted stairs are where most cleaning jobs stall. A mop can't reach them. A standard vacuum lifts loose dust and nothing else. Wipe a stained cushion with a wet cloth and the mark usually spreads outward instead of coming out.

Upholstery work needs water pushed into the fabric under pressure and pulled back out with the dirt. Cotton slipcovers and velvet cushions fail in different ways, and one setting won't handle both, which is why this category has stayed separate from floor care rather than folding into it.

The range covers that job at four levels of duty.

STC265 sits at the light end. It's a 450W spot cleaner with 16kPa of suction and a 120°C steam mode that heats up in about 20 seconds. Cold, hot and steam settings let an operator match the treatment to the fabric: cold water on wool blends, steam on synthetic covers and mattress ticking. CE approval and EU, US or UK plug options make it the easiest of the four to slot into a private-label retail programme.

ST-LB-08A moves up to carpet and full-sofa work. It runs 160°C steam at 90kPa and pairs it with 15kPa of suction. Dual tanks keep clean and dirty water apart on a zero-backflow design, so a crew isn't pushing dirty water into fabric it's just cleaned. For a carpet cleaner working through a house in one visit, that's the difference between a room that dries clean and one that dries with a ring around the edge.

STC501-DC is the extraction unit. A 400W motor drives 22kPa of pull through a 1.7m hose and 4m cord, with 1.6L of clean water and 1.5L of dirty. It's built for spray extraction, where fabric gets wet on purpose and the machine has to take the water back out. Car interiors, upholstered furniture and fast-turnover rental stock are the natural fits, and the tanks are sized so one fill covers a job.

STC-301AS handles volume. The 1,700W commercial machine pulls 16,000Pa, runs a 40°C or 60°C wash cycle, and arrives with a 14-nozzle set and a bagless 1.6L tank. Property managers and contract cleaners tend to buy this one in multiples, because it's the model that keeps going through a building rather than stopping after one suite.

All four are available with OEM/ODM customisation covering private label, plug type, voltage and packaging, and every order goes out at factory-direct pricing with pre-shipment QC. Voltage and plug specs are set per destination market, so a batch bound for the UK doesn't land needing adapters. Stonebot now ships to 19 countries across six regions, and upholstery cleaners move on the same terms as the floor washers, window robots, pet grooming vacuums and pool cleaners already in the catalogue.

The four units also split a range cleanly by customer type. Hotel housekeeping wants the steam spot cleaner. Carpet crews want the 160°C machine with proper tank separation. Detailing shops and furniture rental want spray extraction. Contract cleaners want the 1,700W unit with the nozzle set. Four models under one supplier keep spares, packaging and shipping documents on a single set of terms instead of four.

Specs for each model sit side by side on the upholstery and fabric cleaner comparison page, including suction, tank capacity, hose and cord length. Sample units and quote requests go through the same form as the rest of the catalogue.

About Stonebot

Stonebot supplies smart cleaning appliances to wholesalers, distributors and private-label brands, with five product lines, OEM/ODM customisation, factory-direct pricing and pre-shipment QC. stonebotclean.com