Source Of Poultry Feed Pellet Making Machine Clog

Author : Cabrera Goldberg | Published On : 28 Mar 2026

In the process of substance feed production, the secure as well as typical production of the poultry feed pellet making machine is very important, because the poultry feed pelletizer entirely finishes the prep work of the poultry feed pellet making machine. Yet in real manufacturing, due to numerous factors, it is simple to form a thick and difficult material in between the ring die and journalism roller. The stress roller can not squeeze out the product from the die hole, to ensure that the ring die of the poultry machine is stuck or slid, triggering the typical clog of the poultry pellet mill.

Via on-site evaluation of multi-equipment as well as multi-material, the factors for machine clog are as follows:

1. The die roll void is not suitable.
The gap between the die rolls is as well large, leading to an exceedingly thick product layer in between the die rolls, unequal circulation, uneven stress roll stress, as well as simple slippage. When the extrusion force of the die roller on the material is less than the resistance of the inner wall of the die opening to the product, the material can not be squeezed out, which will certainly cause obstruction. In order to minimize obstructing, interest must be paid to adjusting the space between the die rolls during production.

When changing, it is best to form a state of closeness, turning as well as non-rotation of the pressure roller as well as the ring die. According to observation, the void is normally 3-5mm. In this process, the experience and also modification feeling of the poultry feed pellet making machine are very vital.


2. The result of steam.
The most optimal production problems in the production procedure of pellet feed are suitable resources water, great heavy steam quality and enough conditioning time. Correct use of completely dry saturated vapor granules can successfully improve the outcome of the poultry feed pellet granulator and the high quality of the granulated material. In order to make certain great particle high quality and also high result, along with the normal operation of each transmission part of the poultry feed machine, the top quality of completely dry saturated vapor entering the conditioner of the poultry feed pellet making machine should also be ensured.

Suitable saturated steam has softening and lubricating result in the granulation process, which can enhance efficiency, reduce frictional heat, and also prolong the service life of ring die; it can reduce power usage as well as advertise starch gelation. wood pellet machine maker -to-fiber bonding; it can enhance the fragment creating price, lower powder, make the product look smooth as well as tidy, and also boost product competition.

The poor quality of the vapor makes the moisture of the product expensive when it leaves the conditioner, and also when it gets in the particle dental caries, it is simple to trigger obstruction of the die hole, and also the stress roller slides, causing clog.

Specifically:
① Not enough steam stress and high water web content can quickly trigger the material to take in too much water. At the same time, when the stress is low, the temperature of the material is additionally low during conditioning, the starch can not be gelatinized well, and also the granulation effect is poor;
② The vapor stress is unsteady, varying high and low, as well as the material conditioning is unpredictable, leading to big variations in the current of the poultry feed making machine, irregular thirst of the material, and also simple obstruction in the typical manufacturing process.

The poultry feed pellet making machine must always take notice of aspects such as steam pressure, conditioner feed price, and so on, to stay clear of excessive dampness in material conditioning caused by steam pressure and also water web content. At the same time, in order to lower the variety of clogs brought on by vapor high quality, the boiler room need to give high-grade, secure completely dry saturated steam. In the manufacturing procedure, the poultry feed granulator need to always take notice of the wetness web content of the appeased as well as solidified product, which can be evaluated by an easy approach. The specific technique is: get the material of the conditioner, hold it by hand, as well as release it.

3. The impact of conditioning impact.
In order to make pellet feed satisfy the affordable demands of the market, its excellent high quality must be assured. The conditioning impact of the product before granulation is extremely essential, since it directly affects the output and quality of the poultry feed pellet making machine, particularly the water stability of unique water products is a vital sign.

If the product can not be totally conditioned as well as matured prior to granulation, it is hard to ensure the water stability index. The so-called conditioning describes the pretreatment of powder materials prior to granulation, which is the procedure of fully mixing as well as soaking up the powder to be granulated as well as an appropriate amount of steam in the conditioner.

Select the conditioning equipment that satisfies the technological requirements, to make sure that the material can be completely mixed and also combined with steam in the conditioner to achieve the impact of softening the product and also gelatinizing starch, which contributes to the compression molding of powder and generates certified products.


The poultry feed pellet making machine conditioner needs a long period of warmth conservation, home heating and also humidification, as well as the variety of layers can be set up in any kind of mix as needed to make sure that the product can totally fulfill the requirements of conditioning, enhance the surface as well as internal top quality of the granular material, as well as boost its water resistance in water. Presently, one of the most ideal conditioning effect can be attained by utilizing the method of Modulator+Qualifier+Modulator.

With on-site debugging, the variety of clogs of the poultry feed pellet making machine can be reduced by changing the heavy steam. As the central heating boiler equipment has been developed, the steam given has been identified. Pay attention to the therapy method of water vapor in the steam pipeline, try to leave out the compressed water in the vapor pipe, as well as the steam stress at the front end of the conditioner need to be very secure.