Root Cause Of Poultry Feed Pellet Making Machine Obstruction

Author : Ritchie Vangsgaard | Published On : 23 Apr 2026

In the process of compound feed production, the risk-free as well as typical production of the poultry feed pellet making machine is extremely crucial, since the poultry feed pelletizer completely completes the prep work of the poultry feed pellet making machine. Yet in real production, as a result of different reasons, it is easy to form a thick as well as difficult product between the ring die as well as the pressing roller. The stress roller can not extrude the material from the die opening, to make sure that the ring die of the poultry machine is stuck or slipped, causing the usual blockage of the poultry pellet mill.

Through on-site analysis of multi-equipment as well as multi-material, the reasons for machine clog are as adheres to:

1. The die roll gap is not suitable.
The void between the die rolls is too huge, causing an excessively thick material layer between the die rolls, irregular circulation, irregular pressure roll stress and anxiety, and simple slippage. Once the extrusion pressure of the die roller on the material is less than the resistance of the inner wall surface of the die opening to the material, the material can not be squeezed out, which will cause blockage. In order to decrease blocking, interest should be paid to adjusting the space between the die rolls throughout manufacturing.

When changing, it is best to create a state of closeness, rotation and non-rotation of the stress roller as well as the ring die. According to monitoring, the space is normally 3-5mm. In this process, the experience and change feeling of the poultry feed pellet making machine are really vital.


2. The impact of steam.
The most ideal manufacturing conditions in the production procedure of pellet feed appropriate basic material water, good vapor quality and also enough conditioning time. Correct use dry saturated vapor granules can efficiently boost the outcome of the poultry feed pellet granulator and also the high quality of the granulated material. In order to guarantee great bit high quality and high output, along with the regular operation of each transmission part of the poultry feed machine, the quality of dry saturated vapor getting in the conditioner of the poultry feed pellet making machine should also be ensured.

Ideal saturated steam has conditioning and lubricating result in the granulation process, which can improve efficiency, reduce frictional heat energy, and also extend the service life of ring die; it can lower power intake and advertise starch gelation. Fiber-to-fiber bonding; it can boost the fragment creating price, reduce powder, make the material appearance smooth as well as clean, as well as improve product competition.

The poor quality of the steam makes the dampness of the product too expensive when it leaves the conditioner, and also when it goes into the fragment tooth cavity, it is simple to cause blockage of the die hole, and the stress roller slips, creating clog.

Specifically:
① Not enough heavy steam pressure and high water content can conveniently create the material to soak up excessive water. At the same time, when the pressure is reduced, the temperature level of the material is additionally reduced throughout conditioning, the starch can not be gelatinized well, and the granulation impact is poor;
② The vapor stress is unsteady, varying low and high, and also the material conditioning is unstable, causing large variations in the current of the poultry feed making machine, irregular thirst of the product, and very easy obstruction in the typical manufacturing procedure.

The poultry feed pellet making machine must constantly focus on elements such as heavy steam stress, conditioner feed rate, etc, to avoid too much dampness in material conditioning caused by heavy steam stress and also water material. At the same time, in order to decrease the variety of obstructions triggered by vapor quality, the boiler room ought to provide high-grade, stable completely dry saturated vapor. In the production procedure, the poultry feed granulator need to always focus on the moisture web content of the quenched and solidified material, which can be judged by an easy method. pellet machine in Maldives is: get the product of the conditioner, hold it by hand, as well as launch it.

3. The influence of conditioning result.
In order to make pellet feed meet the competitive needs of the market, its exceptional quality has to be guaranteed. The conditioning impact of the material before granulation is extremely essential, due to the fact that it directly impacts the output and also top quality of the poultry feed pellet making machine, especially the water stability of special marine products is a vital indication.


If the product can not be totally conditioned as well as matured before granulation, it is challenging to guarantee the water stability index. The supposed conditioning refers to the pretreatment of powder products prior to granulation, which is the process of totally mixing as well as soaking up the powder to be granulated and also a suitable quantity of heavy steam in the conditioner.

Select the conditioning equipment that fulfills the technological requirements, so that the material can be completely stirred and combined with steam in the conditioner to attain the impact of softening the product and also gelatinizing starch, which is conducive to the compression molding of powder and generates qualified products.

The poultry feed pellet making machine conditioner requires a long period of warm conservation, home heating as well as humidification, and also the number of layers can be set up in any type of mix as required to guarantee that the product can totally fulfill the requirements of conditioning, enhance the surface area and internal top quality of the granular product, as well as boost its water resistance in water. Presently, the most optimal conditioning effect can be attained by utilizing the approach of Modulator+Qualifier+Modulator.

With on-site debugging, the number of blockages of the poultry feed pellet making machine can be minimized by readjusting the vapor. As the central heating boiler tools has been developed, the vapor offered has been established. Take notice of the treatment method of water vapor in the steam pipe, try to omit the compressed water in the heavy steam pipeline, and the heavy steam pressure at the front end of the conditioner should be very stable.