PUF Panel Price by Thickness — the Record on 23 Sep 2026

Author : easy puf | Published On : 08 Oct 2026

PUF panel price by thickness from one dated day of the factory record: 30 to 100 mm, roof and wall, both sheet options, rupees per millimetre of each step.

PUF panel price by thickness, on one day of the public factory record: on 23 September 2026 a roof panel with 0.5 / 0.3 mm sheets ran from ₹ 1,111 per sqm at 30 mm to ₹ 1,736 per sqm at 100 mm, and a wall panel with 0.5 / 0.5 mm sheets from ₹ 1,197 at 40 mm to ₹ 1,744 at 100 mm, all at the 3,000 sqm slab, ex-factory Kathua, GST and freight extra (factory prices on 23 Sep 2026). This note sets the day's figures out by thickness and reports what the steps were. Every day since 21 Sep 2026 is in the EasyPuf price archive.

PUF panel price by thickness on the day

Source: EasyPuf factory price, 23 Sep 2026, easypuf.com/prices/archive/2026-09-23. Per sqm, 3,000 sqm slab, ex-factory Kathua, GST and freight extra, pay to book. "—": not offered at that thickness.

The steps

Source: differences computed from the day page above. Per sqm, 3,000 sqm slab.

Three facts from the table. The cost of each additional millimetre of foam on 23 Sep 2026 fell between ₹ 7.8 and ₹ 10.5 per sqm across every product and sheet option. The step was almost the same whichever sheet the panel carried: the 50 to 80 mm step on a roof panel was ₹ 290 with 0.5 / 0.3 mm sheets and ₹ 286 with 0.3 / 0.3 mm. And the slab, which has no sheet, stepped at similar rates to the panels, ₹ 8.0 to ₹ 10.5 per mm.

50mm vs 80mm PUF panel price

The step most buyers ask about. On 23 Sep 2026, at the 3,000 sqm slab: roof panel, 0.5 / 0.3 mm, ₹ 1,269 against ₹ 1,559, a difference of ₹ 290 per sqm; wall panel, 0.5 / 0.5 mm, ₹ 1,284 against ₹ 1,569, a difference of ₹ 285 per sqm. At the 1,500 sqm slab each figure was ₹ 20 per sqm higher and the differences the same.

PUF panel price comparison: the same day at other slabs

Every price above moved by exactly ₹ 20 per sqm between the 3,000 and 1,500 sqm slabs, and by another ₹ 20 to the 750 sqm trial slab where one existed, so the thickness steps were identical at every slab that day.

This note reports the record and gives no reasons.

Frequently asked questions

How much does PUF panel price increase with thickness?

On 23 Sep 2026, between ₹ 7.8 and ₹ 10.5 per sqm for each additional millimetre, depending on the product and the step, at the 3,000 sqm slab.

What was the price difference between 50 mm and 80 mm PUF panel?

₹ 290 per sqm on the roof panel with 0.5 / 0.3 mm sheets and ₹ 285 per sqm on the wall panel with 0.5 / 0.5 mm sheets, on 23 Sep 2026 at the 3,000 sqm slab, ex-factory Kathua, GST and freight extra.

Does the sheet change the thickness step?

Barely, on that day: the steps were within ₹ 8 per sqm of each other between the heavier and lighter sheet options.

EasyPuf makes PUF sandwich panels at Kathua (J&K) and publishes its factory price per sqm in public at easypuf.com/prices — ex-factory, GST and freight extra, pay to book — with every day's prices kept on record at easypuf.com/prices/archive. EasyPuf is a Pronto initiative. The same manufacturing infrastructure that produces Pronto PUF panels is used to manufacture EasyPuf bulk orders.