Tips for utilizing poultry feed pellet making machine in winter season

Author : Link Deleuran | Published On : 19 Feb 2026

( 1) The temperature and also time at which the poultry feed pellet making machine itself is linked to the steam, as well as the ambient temperature. The functioning principle of the poultry feed pellet handling machine is: make use of vapor to supply, and after that add material to guarantee the temperature level of the pellet. Where feasible, home heating is supplied in the production workshop to ensure that the poultry feed manufacturing machines and also production personnel operate at regular temperature level.

( 2) Lubricating oil infused into the poultry feed pellet making machine. In the winter season, because of the low temperature level, the oil of the fragment feeder might strengthen, making it tough to replenish the oil. Moreover, pellet mill in Finland may also trigger the oil supply of the lubricating oil to be disturbed. Eventually wear is most likely as a result of absence of oil.

( 3) Dilution of oil. Utilizing methods such as mechanically aided oil injection, fabricated heating, as well as oil dilution, small poultry feed making machine grease liquefaction can be recognized.

( 4) Clean the studio of the molding wheel of the poultry pellet feed creating machine. After each operation, the extrusion table of the molding wheel of the poultry feed machine need to be strictly cleaned up to prevent the extrusion workshop from freezing due to too much moisture as well as reduced temperature, which will certainly impact the normal operation of the tiny as well as medium-sized poultry feed pellet making machine.


( 5) Timely upkeep and sensible upkeep of the poultry feed pellet making machine. The maintenance and maintenance of poultry feed pellet making machine is really essential. In this regard, try to perform regular maintenance on time and also troubleshoot prior to production. Change damaged wearing components in time to guarantee high efficiency as well as high return of pellets.

Specifically in winter, if there is a little mistake, the poultry feed pellet making machine will certainly show up abnormal. Therefore, all major customers have to do a good work in maintenance and maintenance in wintertime.

2. What devices is the compound feed generated?

( 1) Premix: It is made by blending 90% provider (corn meal, bran, husk dish, and so on) and also 10% additives, representing 0.5 ~ 5% of the total feed. Therefore, the additive with a percentage has to be combined with the service provider first, and then blended with other feeds to accomplish uniform mixing. Although the material of this feed is not high in the total feed, it has an excellent impact and the production problems are relatively stringent.

Consequently, the huge and also medium-sized feed manufacturing facilities are usually used for the manufacturing of blended feed without mixing workshops, as well as the tiny poultry feed manufacturing facilities directly purchase the products of those manufacturing facilities, in order to streamline the job and poultry feed machine.


( 2) Concentrated mixed feed: It is made by pre-mixing carrier, protein feed as well as additives. When making use of, the feed requires to be diluted to 5 ~ 50% as full-price substance feed. Concentrate handling plants are typically constructed in areas where healthy protein feed sources are focused.

( 3) Complete substance feed: It is made by mixing energy feed and concentrated mixed feed and diluted in 2). This product can fulfill all phases of the growth of animals and also poultry. The full-price compound feed factory for straight handling of feed raw materials is normally developed in big as well as average cities or vital website traffic locations.

Nonetheless, those poultry feed mill factories that utilize focused drinks to create full-price drinks can likewise have relatively basic procedures and devices, and also are mainly located in feed manufacturing facilities in little animals farms.

( 4) Developed focused feed: It is formulated with power feed and healthy protein feed. It is suitable for small farming in my nation and is fed with silage. This type of drink has much less strict requirements for adding trace quantities, so it can streamline the production procedure, reduce investment and also decrease prices. In my nation, feed manufacturing facilities are the primary ones, and also most of them are built near grain and oil handling manufacturing facilities or storage facilities near small towns.

3. What are the cleaning methods of the feed pellet machine?

Typical cleaning techniques in the world: The most typical cleaning approach is a three-step cleaning method based upon alkaline cleaning, pre-cleaning - chlor-alkali cleaning - post-cleaning, as well as the regularity of pickling is figured out according to water solidity.


This cleaning method is extensively made use of in a lot of European countries as well as Asian nations, such as the Netherlands, where it is the basic cleansing method for pastures. Nevertheless, biomass pellet machine in Tajikistan cleansing technique in Denmark is: pre-cleaning - alkaline cleaning - cold water cleaning - acid cleansing, with pure cold water prior to milking.

One of the most typical cleansing steps in the united state are: pre-rinse - caustic - pickling, sanitizing before milking. Pickling is a common cleaning method in New Zealand, specifically boiling water with acidic cleaning agents, cold water and routine alkaline cleansing.

Finally, what cleansing technique for poultry feed pellet making machine to utilize mainly relies on the customizeds as well as legal demands of various countries, as well as the power costs needed to heat the water, cleaning expenses as well as cleansing problems.