Palm Oil Refinery : Process, Equipment, Yields and How to Choose a Plant Builder

Author : FOSTECHNO PROCESS & ENGG PVT LTD | Published On : 20 Nov 2026

Crude palm oil is orange-red, thick, and carries an earthy smell. It cannot go straight into a bottle of cooking oil, a packet of noodles, or a tub of margarine. Between the mill and the kitchen sits a palm oil refinery.
https://fostechnos.com/blog/palm-oil-refinery-fostechno/
Whether you are an investor in Southeast Asia, an edible oil processor in Africa, a trader in the Middle East, or a plant owner in South Asia or Latin America, the questions are the same: how does the process work, what equipment is needed, what yields should you expect, and who should build the plant?
 
This guide answers all of them, step by step, in plain language.
 
What Is a Palm Oil Refinery?
A palm oil refinery is an industrial plant that converts crude palm oil (CPO) into refined, bleached and deodorized palm oil (RBDPO). Many refineries also fractionate that oil into liquid palm olein and solid palm stearin.
 
Crude palm oil comes from the fleshy part of the oil palm fruit. Along with the oil you want, it contains:
 
Free fatty acids (FFA): typically 3 to 5% in well-handled CPO, higher if fruit is stored poorly
Phospholipids (gums): cause foaming and darkening at high temperature
Trace metals: iron and copper accelerate rancidity
Carotenoids: the pigments that give CPO its color
Odor compounds and oxidation products: affect taste and shelf life
Moisture and impurities: small but important
The refinery removes these in a controlled sequence while protecting the triglycerides, the valuable core of the oil.
 
A refinery is not a palm oil mill. The mill extracts crude oil from fruit bunches. The refinery purifies that crude oil. Some companies run both, but the machinery and skills are different.
 
Why Palm Oil Must Be Refined
Palm oil is the most produced vegetable oil in the world. It goes into cooking oil, vanaspati, margarine, shortening, instant noodles, snacks, bakery fats, soaps, cosmetics, and biodiesel feedstock.
 
Crude oil is unsuitable for most of these uses because of:
 
Taste and smell: crude oil has strong flavors that clash with food.
Shelf life: FFA, metals and gums speed up oxidation.
Appearance: consumers expect pale yellow oil.
Regulation: food authorities set limits on FFA, moisture, peroxide value and contaminants.
Performance: frying oil must resist foaming and smoking.
Physical Refining vs. Chemical Refining
Physical Refining
Physical refining removes FFA by steam distillation under high temperature and deep vacuum. No caustic soda is used. It is the standard route for palm oil.
 
Why it suits palm oil:
 
Palm oil has fewer phospholipids than soybean or sunflower oil, so acid degumming and bleaching can prepare it without alkali.
Neutral oil yield is higher because no soapstock carries oil away.
Wastewater is much lower.
FFA is recovered as a saleable by-product, palm fatty acid distillate (PFAD).
Chemical Refining
Chemical refining neutralizes FFA with sodium hydroxide, forming soapstock that is removed by centrifuge, followed by washing and drying.
 
It is used when:
 
Crude oil has very high FFA
The oil is badly degraded
A multi-oil plant already has chemical refining equipment
Factor Physical Refining Chemical Refining
FFA removal Steam distillation under vacuum Neutralization with alkali
Chemicals Phosphoric/citric acid, bleaching earth Caustic soda, acid, water, plus the above
Neutral oil loss Lower Higher
Wastewater Low Higher
By-product PFAD Soapstock
Best for Palm oil with moderate FFA High-FFA or poor crude
The Palm Oil Refining Process, Step by Step
Temperatures vary by design and crude quality, but the sequence is consistent.
 
Step 1: Crude Oil Receiving and Pre-heating
CPO arrives by tanker, ISO tank or drum. Palm oil starts to solidify at roughly 33 to 39°C, so storage tanks are kept warm, typically around 50 to 55°C, with heating coils. Samples are tested for FFA, moisture, impurities and color. These results decide acid dose, bleaching earth dose and expected yield.
 
Step 2: Degumming (Pre-treatment)
Degumming removes phospholipids and trace metals. Left in the oil, they burn onto surfaces in the deodorizer, darken the oil and lower quality.
 
The oil is heated to about 85 to 90°C.
A small dose of food-grade phosphoric or citric acid is added, usually a fraction of a percent of oil weight.
The acid converts non-hydratable phospholipids into a form that can be removed.
The conditioned oil moves directly to bleaching, where gums are adsorbed with the earth.
This “dry degumming” approach is common for palm oil because its phospholipid level is relatively low.
 
Step 3: Bleaching
Bleaching in oil refining is adsorption, not chemical whitening. Activated bleaching earth is mixed into the oil under vacuum, and impurities stick to the clay.
 
It removes: carotenoid pigments, chlorophyll traces, residual gums, oxidation products and trace metals.
 
Typical conditions:
 
Temperature around 90 to 110°C under vacuum
Bleaching earth dose often 0.5 to 2% of oil weight
Contact time roughly 20 to 30 minutes with agitation
The oil is then filtered, typically through pressure leaf filters, followed by polishing filters. Spent earth can retain 20 to 30% oil by weight, so oil recovery and safe disposal matter for yield and compliance.
 
Step 4: Deodorization and De-acidification
This is the heart of physical refining and the most energy-intensive section.
 
Bleached oil is heated to roughly 240 to 270°C.
It is held under deep vacuum, often a few millibar absolute.
Live stripping steam is injected.
Volatile compounds, including FFA, aldehydes and ketones, leave with the steam.
A fatty acid scrubber condenses the vapors and recovers PFAD.
The deodorized oil is cooled and polish-filtered.
The result is RBDPO with FFA usually below about 0.1%, neutral taste and smell, and pale yellow color.
 
Equipment in this section: heat recovery exchangers, thermal oil heater or high-pressure boiler, deodorizer vessel (stainless steel contact parts, commonly 304 or 316L), vacuum system (steam ejectors or liquid ring pumps), and scrubber with condensers.
 
A Note on 3-MCPD and Glycidyl Esters
3-MCPD esters and glycidyl esters (GE) are process contaminants that form mainly during high-temperature deodorization. Regulators, especially in the European Union, set limits for them, and many global buyers apply their own specifications.
 
Refiners reduce them by:
 
Using better crude with low chloride content
Optimizing bleaching conditions
Lowering deodorization temperature and residence time where possible
Using two-stage or dedicated mitigation designs
Applying mild water washing before deodorization
If you export, ask every plant supplier how their design handles these contaminants. It is now a core design question.
 
Step 5: Fractionation
RBDPO is semi-solid at moderate temperatures. Fractionation splits it for different markets.
 
RBD oil is melted, then cooled slowly in crystallizers.
High-melting triglycerides crystallize into stearin.
A membrane filter press separates the liquid olein from the solid stearin.
Typical yields: about 70 to 80% olein and 20 to 30% stearin, depending on target iodine value and number of stages. Double fractionation gives super olein with better cold-weather clarity, plus palm mid-fraction used in confectionery fats.
 
Where fractions go:
 
Olein: cooking oil, industrial frying for snacks and noodles
Stearin: margarine, shortening, vanaspati, soap noodles, oleochemicals
Mid-fraction: cocoa butter equivalents and specialty fats
Step 6: Storage and Packing
Finished oil is stored in food-grade tanks, often under nitrogen blanketing, then packed into pouches, bottles, jerry cans, drums or bulk tankers. Some markets require antioxidants or vitamin fortification (for example vitamins A and D).
 
Process Flow at a Glance
Stage Purpose Typical Temperature Output
Receiving & heating Quality check, pumpable oil 50–55°C Warm crude oil
Degumming Remove gums and metals 85–90°C Acid-conditioned oil
Bleaching Remove color and impurities 90–110°C (vacuum) Bleached oil, spent earth
Deodorization Strip FFA and odor 240–270°C (deep vacuum) RBDPO, PFAD
Fractionation Separate liquid and solid Controlled cooling Olein and stearin
By-Products of a Palm Oil Refinery
PFAD: usually about 3 to 5% of crude oil input in physical refining, depending on FFA. It is sold for soap noodles, fatty acids, animal feed, oleochemicals and biodiesel feedstock. PFAD prices can influence refinery margins noticeably.
 
Spent bleaching earth: carries retained oil. Options include oil recovery, use in some construction materials, or approved disposal. Oily earth can self-heat, so storage must be managed.
 
Stearin and mid-fraction: co-products with their own markets.
 
Wastewater and sludge: physical refining produces far less than chemical refining, but condensate and wash water still need treatment.