Making use of poultry making machine properly

Author : Dreyer Neal | Published On : 17 Mar 2026

As all of us recognize, the poultry making machine is called for the smooth surface area of the feed produced, the high hardness of the pellets, and also the inner healing, which can boost the nutrient absorption of pets. According to various resources, pellets that can be eaten by livestock are straight generated via the pressing of the poultry making machine.

Nonetheless, during a recent return visit to an old consumer, our staff discovered some problems triggered by incorrect use of the poultry feed pellet making machine. The complying with are a couple of issues and also options that Richi Equipment has assembled for you.

( 1) Are the produced pellets curved and also broken?

Factor: This scenario is often triggered by the pellets leaving the poultry feed pellet making machine. When the placement of the cutter is adjusted further from the surface and also the blade edge is boring, the pellets are damaged or torn by the cutter rather than being extruded from the die opening. Cut off, right now some pellets are curved to one side as well as several splits show up beyond. Throughout the process of getting in the colder for cooling or transport, the pellets tend to break from these splits, resulting in way too much pellet powder produced.


Enhancement technique:
a. Raise the compression proportion of the mold, consequently enhancing the thickness and also hardness of the pellets.
b. Grind the raw materials finer to enhance the thickness of pellets and also stop the feed from being loose.
c. Readjust the range in between the cutter and the die surface area or change the cutter with a sharper one.


( 2) Is the surface area of the pellets irregular?
This scenario is that the powder utilized for granulation includes basic materials with huge pellets that have actually not been squashed or semi-crushed. Due to not enough softening during the poultry making machine conditioning procedure, the pellets are reasonably hard and also fairly large. After passing through biomass pellet machine in North Korea of the poultry making machine, when the pores are not well incorporated with other basic materials, the pellets show up unequal.

Improvement approach: correctly manage the thickness of powdered feed, to ensure that all raw materials can be completely softened throughout conditioning; for raw materials including more fiber, vapor bubbles are quickly mixed, so do not include too much to this formula. lots of heavy steam.


( 3) Is the color of individual pellets or pellets irregular?

This situation prevails in the manufacturing of aquafeed, generally manifested in that the shade of specific pellets squeezed out from the poultry making machine is darker or lighter than that of other regular pellets, or the surface shade of a single pellet is irregular, therefore affecting the appearance quality of the entire set of feed.

Renovation technique: generally to manage the blending uniformity of each component in the formula as well as the mixing harmony of the added water; enhance the solidifying performance, regulate the solidifying temperature level if required, as well as make use of a lower tempering temperature to minimize the shade adjustment; Control the return material. For solutions that are prone to "unequal color", try not to utilize the return material to straight powder. The return material need to be combined with the raw materials and then smashed once again. The mold and mildew with ensured top quality is utilized to control the dimension of the die opening. Complete, sand the die hole if needed before use.

2. Working principle of RICHI poultry making machine

Ring die poultry making machine is among the primary equipment of RICHI poultry pellet feed production line, the feed from powder state to pellet development must be completed via 4 locations:
( 1) The material is carried to the modulator via the speed-regulating feeding auger. In order to acquire great granulation benefits (rise result and also quality), after including warm steam for conditioning, the product is brought near to the ring die cover and also the internal wall of the die (feeding location) by gravity and centrifugal force produced by the rotation of the ring die.
( 2) Under the action of the reducing knife, the wedge-shaped area (compression zone) developed by each pushing roller as well as the ring die is fed evenly and also continuously.
( 3) Because the void between the functioning surface of the external wall surface of the pressure roller and also the functioning surface of the inner size of the ring die is only 0.1-0.3 mm, and also the gap is generally straight, a specific extrusion force (extrusion area) is formed.
( 4) As a result of the feeding, under the strong extrusion between the die and the roller, the material is compressed, squeezed into the die opening, and also developed in the die opening (creating zone).
The material continuously goes into the pressing location, is extruded as well as continuously extruded from the die hole, and also is cut into different preferred pellet lengths from the range in between the flexible blade edge and also the external wall of the ring die.


3. What is the factor for the different sizes of feed pellets?

Feed machinery and also equipment is a type of equipment for processing feed. It is widely welcomed by people for its distinct benefits. Nevertheless, being used, different sizes are prone to take place. Right now, we need to fix it sensibly. Before fixing, we need to understand the difference. The factor for the size is to bring comfort to our usage, so what are the reasons for the different dimensions of the feed pellet machine?

( 1) Feeder blade. Gear: The formation of feed pellets mainly depends on the rolling of the pellet machine equipment and the cutting of the moving blade. When the equipments or blades might reduce the feed pellets with uneven thickness and length.

( 2) Electric motor: The electric motor outfitted with the feed pellet machine is an electric motor ideal for its ranked power. Once it is damaged throughout procedure or the running power is unpredictable, it can not be pelletized or pelletized erratically.



( 3) Operation: As a result of the uneven operation of the driver, the pellet feed handling machinery will also create unequal pellets. As an example, pellet powder consists of a lot of water, to ensure that feed pellets do not develop, and also cold cracks may be formed. If this takes place, operators must steadly evaluate, learn the factors, as well as make up for it in time, so as not to affect the outcome worth of pellets as well as create equivalent financial loss.

When feeding the poultry making machine, we need to pay attention to various feeding dimensions, because various feeding dimensions are not only simple to trigger equipment obstruction, but likewise simple to trigger equipment damages, therefore influencing our regular work, which requires us to make use of, reinforce upkeep, to expand the performance of poultry making machine usage.