Main features of aquatic floating feed machine
Author : Salling Coleman | Published On : 27 Mar 2026
Today, aquatic floating feed machine innovation is preferred in the production of aquafeeds, as it can be used to generate a selection of feeds, whether floating or sinking, relying on the needs of each varieties. Additionally, the extruded feed made by marine floating feed machine has much less deterioration and also high performance, aiding to boost digestibility.
During the aquatic floating feed machine extrusion procedure, devices such as temperature, humidity, pressure will certainly increase starch gelatinization, decompose as well as soften the cell wall surface as well as release some easily digestible compounds, hence promoting the digestion and also absorption of farmed pets.
With aquatic floating feed machine extrusion innovation, it is feasible to inhibit particular protease preventions (such as antitrypsin), destroy pathogens in resources or modification protein properties to additional boost the contact with enzymes in fish and shrimp, helping to absorb food extra quickly.
Extruded biomass pellet machine in Belgium made by aquatic floating feed machine can manage the content of substances as well as assist far better detoxification. At the same time, the longer stabilization time in the water (12-36 hrs) assists farmers to observe and regulate the feeding routine.
Although extruded feed made by floating fish feed making machine has obvious advantages over pelleted feed, the preliminary investment price of extruded feed manufacturing is greater, leading to greater feed prices.
But for high-end fish farming, more and more people are taking note of the market possibility of premium fish feed.
1. Highlight of marine floating feed machine
Feeding, rotary cutting, and also primary drive all adopt frequency conversion rate guideline system, which has strong power, steady procedure, energy conserving, high water production effectiveness, long lasting tools, reduced failure rate, as well as convenient procedure as well as maintenance.
The screw of floating feed machine is made of alloy product by special process, the service life is 3-4 times longer than that of domestic similar machines, and the price of producing feed is low; the segmented combined screw appropriates for a variety of resources and also even more diverse products.
Automatic lubrication system of the floating feed machine lowers power intake and extends service life.
The feeding system takes on spiral forced feeding, and the feeding is consistent as well as vast. It can be outfitted with an automated feeding system. The feeder is a screw conveying variable frequency speed control to change the feeding amount to regulate the blowing output (measurable feeding, as well as can successfully stop the product from arching).
Straight bearing tool modification system, readjust the tool properly and also quickly.
The twin-screw of floating feed machine has self-cleaning feature, as well as using devices is extra affordable and practical.
Update the configuration of different devices modern technology and devices to make the output of the twin-screw floating feed machine bigger.
Various screws and also length-diameter proportions can fulfill different production procedures.
Aesthetic automatic temperature level control system to make temperature control more instinctive and criteria more accurate.
The general floating feed machine setup The operation of the fish feed pellet extruder is much more instinctive as well as the upkeep is more convenient.
Dry puffing procedure takes on self-heating technique without vapor system, which is extra according to the actual needs of customers.
No adhesive is required to process the floating feed, and also it can preserve stability in water for greater than 12 hours.
Small and also medium equipment is especially appropriate for scientific research establishments, special reproduction farms or medium and tiny feed manufacturing facilities. There are also specially personalized experimental twin-screw floating feed machines available for scientific research study systems.
2. The distinction in between pellet feed and extruded feed
With the advancement of the floating fish feed processing industry, two extensively made use of innovations currently made use of to generate aquafeed are pelleting and extrusion by floating feed machine Contrasted to all-natural lures, such feeds have greater dietary web content as well as stability, much less wetness, simpler storage, fewer pathogens, and longer storage space times.
Pelletizing by floating feed machine is a strategy of pressing tiny pellets of basic material into bigger pellets, during which moisture, temperature and also pressure can considerably impact the high quality of the feed.
One of the main benefits of pelleted feed is lower production costs. Nonetheless, it has some drawbacks.
One of the most significant drawbacks of pelleted feed is that it sinks faster and also liquifies swiftly in water (according to stats, about 10-15% of feed is squandered), which indicates greater feed expenses, lower farming profits, as well as simpler reason water contamination.
3. Select pellet feed or extruded feed?
Farmers, choose pellet feed or extruded feed?
When selecting feed, farmers need to think about the features of different aquatic varieties and feeding practices. Because the routine of shrimps and also crabs is to find food at the bottom, and afterwards eat the food gradually, so the food must not be too hard and also not easily soluble in water.
For that reason, extruded debris by floating feed machine is the most effective choice since it is soft and hard to dissolve in water, and also it is convenient for shrimp and crab to eat, reducing feed waste and also minimizing water pollution.
Particularly in intensive shrimp farming, squeezed out feed ought to be dominant, due to the fact that it is easier for shrimp to digest healthy protein from extruded feed, which reduces feed waste and also promotes better healthy protein absorption.
At the same time, we can additionally boost the absorption rate of the feed by adding valuable bacteria or boosting digestion items to the feed.
However, from a lasting viewpoint, making use of extruded feed, which is made by floating feed machine will certainly increase the expense, and also if the fish usage extruded feed in the mature period, it may result in fish fat, huge tummy, poor anxiety capability, not appropriate for long-distance transportation, etc, leading to a low cost at the time of sale.
Consequently, in the process of tank farming, when several farmers make use of feed, they typically use a combination of pellet feed and also squeezed out feed, which not only controls water high quality, minimizes feed deposits, but also boosts efficiency and economic advantages.
At the same time, the aquaculture market is advertising the additional advancement of both feeds due to their respective benefits.
4. Setup of floating feed machine.
( 1) Setup of floating feed machine pipeline rack
The choice of the installation setting of the pipeline rack depends upon the site location, yet it must not be too much from the major engine. Much from the main engine will certainly trigger waste of materials throughout pipe connection on the one hand, as well as cause the hysteresis of the control system on the other hand.
If the installment area on website enables, the very best position of the pipeline rack is to be directly behind the primary engine as well as conditioner, parallel to the primary engine, as well as regarding 1 meter far from the primary engine (there is a certain upkeep room), while guaranteeing that the pipe shelf is adjusted upwards. The placement of the heavy steam line interface of the conditioner is on the side of the conditioner.
In order to help with the cleansing of the ground and the discharge of waste water in the future, the pipeline rack ought to be raised by about 10 cm throughout setup. In the installment of each shutoff in the pipeline, the position of the valve wheel must meet the demands of hassle-free procedure for floating feed machine.
( 2) Installment of floating feed machine control box
In order to promote the procedure, the installation position of the on-site control box need to be selected near the bypass, and a particular area must be booked in between the bypass as well as the control box to briefly place the wastes moving from the bypass.
The distance in between the regularity converter of the cutting electric motor as well as the rotary positioner of the on-site cutter must not be as well much. It is regulated by voltage. If the distance is as well far, it will create voltage fluctuations and also influence the cutting effect.
The circulating temperature display tool on the on-site control box is to show the temperature level of each end of the blowing dental caries in real time, as well as the shown temperature level series has particular demands. Area 2 Expansion cavity ... until the material discharge development tooth cavity, this sequence requires to be paid attention to when wiring the electric control.
On top of that, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of floating feed machine. They regulate the opening of each nozzle via the electro-magnetic cut-off shutoff.
The floating feed machine conditioner inlet nozzle switches 1 to 4 on the control box represent the conditioners The 1st nozzle to the 4th nozzle from the feed end.
