Home > > > Just how to keep poultry feed pellet making machine in daily usage?

Just how to keep poultry feed pellet making machine in daily usage?

Author : Stiles Storgaard | Published On : 10 Apr 2026

Ring die poultry feed pellet making machine (additionally referred to as ring die granulator, ring die poultry feed pelletizer) comes from pellet gas granulation equipment. It is a handling machine that directly presses crushed products such as straw, soybean meal, straw, peanut husk, rice husk into granules.

Ring die poultry feed pellet making machine is a SZLH collection tools with good production and also top quality. Due to the complicated layout as well as framework of the poultry feed machine and high maintenance requirements, regular upkeep needs to be performed to make sure the regular operation of the devices.

1. Notes on day-to-day upkeep:
( 1) The recurring products in the poultry feed pellet making machine are often eliminated to avoid the recurring materials from wearing away the ring die;
( 2) Before procedure, the devices needs to be full of lubricating oil to reduce the heat of the fuselage triggered by devices rubbing;
( 3) Always check whether the space in between the ring die as well as journalism roller is within the regular array;
( 4) Routinely inspect the tightness of the triangle tape and also change it in time;
( 5) The surface of the poultry feed pellet making machine needs to be tidy and also sanitary, and also insisting on cleaning the body of the poultry feed pellet making machine can prevent the exterior of the fuselage from rotting.
( 6) When the gadget is devoid of bits. Check whether the material opening is normal. Otherwise, you can pierce openings with a hand drill. Pay attention to the water content of the stirring product, and change the void in between the internal wall surface of the ring die and also the roller;

( 7) The pellet forming price is reduced. The reason is that the moisture content of the material is too reduced, and the dampness content of the powdery material need to be boosted;
( 8) The pellet surface is rough. Take notice of the refueling products, quit the cycle extrusion and confrontation, and also achieve the routine illumination;
( 9) The outcome is too low. If the feeding is not enough, the opening of the feeder gateway can be boosted. If the space between the internal wall surface of the ring die as well as the roller is too large, the space can be adjusted to about 0.15 mm. If the powder is agglomerated in the ring die, the cluster in the ring die sleeve can be eliminated.


2. Which ring die poultry feed pellet making machine is much better?
All type of poultry feed equipment and tools created by Richi Pellet Machinery are affordable, reduced power usage, secure as well as dependable, easy to run, grow in system modern technology, compact in framework, and also one-stop service for complete set of feed complete jobs; Richi Equipment is fully equipped: poultry pellet machine, feed crusher, mixer, expander, cooler, stabilizer, crusher, ring die accessories, electric control system, and so on 3. What should be paid attention to when picking a poultry feed pellet machine?
( 1) Look at the poultry feed pellet making machine supplier
If it is a massive or retail farmer, if conditions allow, you can directly inspect the toughness of the supplier by car. Seeing is believing, however hearing is false. All of it depends on the real grain result you see in the test machine.

( 2) Consider the evaluation
As long as the packaging maker must have a bad reputation, as farmers, they need to understand the producer's credibility in the industry based on the marketplace checklist details for the first time, and also provide themselves some confidence.
( 3) Check out the product
The poultry feed handling equipment is not big or small, and also it is also one thousand yuan to acquire. After buying, the very first test has to be carried out to see whether the overall product granulation impact can meet the satisfying result standard.
Simply put, the various poultry feed pellet making machines on the market make farmers do not know how to pick. As a poultry feed machine supplier, the author reminds most farmers that it is the best to pick the feed processing that matches them.


4. The approach of appropriate change of poultry feed machine press roller

Ring die is a ring die accessory die geared up with ring die poultry feed pellet making machine. biomass pellet machine in Syria used to make ring die are alloy steel, carbon steel and also stainless steel. The ring die is a crucial device of the poultry feed pelletizer, and also the use of the ring die will directly affect the service life of the ring die as well as the top quality of the ended up pellet feed.


Modification of the space in between the ring die and the stress roller For the adjustment of the space in between the new ring die as well as the stress roller, the ring die as well as the acme of the stress roller need to be somewhat contacted, and also the stress roller ought to remain in a state that does not turn. If the adjustment is made under the poultry feed pellet making machine functioning state, the stress of the ring die and the pressing roller can be appropriately increased, but it has to be dropped in small amounts.

The gap in between the ring die and also journalism roller is as well big, as well as journalism roller can not turn, leading to blockage of the poultry feed pellet making machine. If the gap in between the ring die and also the pressure roller is as well tiny, it will raise the wear and tear of the ring die as well as the pressure roller, enhance the lots, and create damage to the ring die as well as the pressure roller in serious instances.

The void in between the ring die and the pressing roller must be checked in time, a minimum of once every four working hrs. When changing each stress roller, pay attention to the change instructions of each pressure roller, to make sure that the moment amount of each stress roller relative to the shaft of the poultry feed pellet making machine is no, so that the poultry pellet making machine is not affected by asymmetric force.

Properly mount or change ring die and push roller. Usually, the new mold is equipped with a new roller, and the old mold is equipped with an old roller, so that the surface area form of the ring mold and mildew as well as the stress roller is close to the shape of the profiling state, and also the local space between the ring mold as well as the pressure roller is approximately the very same. By doing feed pellet machine in Eritrea , the anxiety and discharge of the entire ring die are very consistent, which can enhance poultry feed pellet making machine production effectiveness.

Group maintenance. Pre-shift assessment needs to be carried out for every change, examine all transmission components, tools and shutoffs, include lubricating oil with lithium-based lubricating oil, as well as get rid of iron filings from iron devices.


Prior to assembly, cleaning needs to be done to guarantee that all mating surface areas are tidy. Pay unique interest to the cleansing of the annular die screw openings. If the material in the ring die screw opening is not clean, it is simple to create splitting of the ring die screw hole when tightening up the ring die bolt. Tighten up the poultry feed pellet making machine ring die bolts with a torque wrench to make certain the defined tightening torque.

When constructing the stress roller, focus on the evaluation of the bearing. Once harmed, it ought to be replaced in time. After the poultry feed pellet making machine rollers are put together, make sure that there is a particular gap to make sure that the rollers can turn easily. The pressure rollers should be full of oil on time every shift. When the stress roller is short of oil, the bearing as well as the stress roller shaft will be melted, and the entire stress roller will certainly be junked in severe situations.