Is Your Company Responsible For The Kia Picanto Key Replacement Budget? 12 Tips On How To Spend Your

Author : Black Stark | Published On : 22 May 2024

How to Fix a Dead Kia Picanto Key Fob

The Kia Picanto is a city car that can zip through traffic gaps and width restrictions like they weren't there. Despite its dinky looks though, it packs in plenty of kit.

There are a myriad of reasons that your Kia Picanto key fob might not be functioning. The most common reason is a dead battery.

Dead Coin Battery

The most common reason a Kia Picanto key fob stops working is a dead or dying battery. Usually, the key fob will show warning signs before it dies in a way, like losing the range or showing irregular behavior. If you notice these signs, it's best to replace the battery before it fails completely. Use a battery with the same voltage, size and specification as the original.

If the key fob not working, you might have to take it to an authorized dealer. This is the only way to guarantee the replacement is programmed correctly and compatible with your vehicle. If you attempt to reprogram a key fob without the proper procedure could damage the internal chip and cause it to stop functioning.

A receiver module that has developed a fault is another possibility. This could be because of a chip that has been damaged or wear and wear and tear. It can be difficult to identify the signs of this issue, however it's crucial to find out whenever you can. If you're unable unlock your key fob, unlock or lock the doors, or if even the spare doesn't work, it is time to call a dealership or service center for assistance. They'll be able to pinpoint the issue and fix it.


Faulty Chip

The key fob has the chip that sends a signal to a computer inside the car. If the chip becomes damaged, it will not transmit the correct code and the car's immobilizer system will be activated. This can be due to various reasons. One reason is a low battery on the key fob. Water damage is another possibility. If the fob is wet, it is very likely that it will cease to function.

A damaged chip could be the reason why a Picanto fob isn't turning on the engine. If you've replaced the battery and attempted to reprogramme the fob but it isn't working, it could be because the circuit board is damaged. It is necessary to replace the circuit board in this case.

To open the Fob, you must press the button on the back of the fob. After that, you can take off the mechanical key. The video below will show you how to replace the battery in the key fob. Use a battery with the same voltage and dimensions. If you use the wrong battery could damage the Fob. Press the lock button after replacing the battery. If it works, then you've got a great Fob.

Faulty Receiver Module

The key fob you have is subjected to a lot of abuse and isn't indestructible. Over time the buttons and battery contacts of your key fob could become damaged. Fortunately, it's relatively easy to fix this on your own with some simple tools.

The fob has to send a signal to a receiver inside your car in order for it to work. If the module is not functioning properly the fob won't capable of opening or starting the car. There are a myriad of possible causes however the first thing to do is reset the fob.

This is done by disconnecting the cable and then letting the battery with 12 volts drain completely. Then, reconnecting the negative and positive cables in reverse order.

If the battery is good and the device is not suffering from water damage, it may simply be experiencing problems with its signal. This could be due to various factors including interference from nearby transmitters or objects that operate on the same frequency band as your Picanto's receiver.

Key fobs come with rubber seals which stop the electronic chip from becoming wet. However when they are submerged in water, the chips may be destroyed. This is why it's crucial to always keep your key fob clear from water, and to only make use of a key fob that has an waterproof design.

Incorrect programming

A Kia Picanto key fob is an easy way to unlock and start your car. kia sportage key can also use it to control the features in your car. It is important to know how to use your key fob, especially if you are driving in a hazardous environment or have limited mobility. Fortunately, there are many Kia Picanto key fob tricks to help you with this!

If your key-fob stopped working out of the blue it could be due to an issue with its internal chip. This is a rare event however, it is possible. To identify the issue you should consult an Kia dealer.

You could also try to reset the Picanto keyfob. The process is simple and can be done at home. The first step is to remove the key fob from the ignition switch. Connect the diagnostic tool beneath the dashboard to the OBDII connector and then start the engine. The diagnostic tool will then ask you for information regarding the Picanto. This includes the VIN, the make, and model.

You can also look for dead batteries. The metal clips in the key fob are used to hold the battery and complete the circuit. If the clips that hold the key fob are loose, they can cause disruption to the flow of electrical energy and cause a loss of functionality.