How to Apply Boron Nitride Coating to Aluminum Casting Launders?
Author : Jack wang | Published On : 18 Nov 2026
Why Apply Boron Nitride Coating to Aluminum Casting Launders? Applying boron nitride coating to aluminum casting launders is an effective way to reduce molten aluminum adhesion, protect refractory contact surfaces, and simplify launder maintenance. The key is to prepare a clean and completely dry substrate, select a BN coating compatible with the refractory material and operating temperature, apply a thin and uniform layer, and ensure that the coating is fully dry before introducing molten aluminum.
In aluminum casting operations, launders transport molten aluminum from melting or holding furnaces to degassing units, filtration equipment, distribution systems, and casting machines. During this transfer process, the inner surfaces of the launder are continuously exposed to high temperatures and direct contact with liquid aluminum.
[caption id="attachment_226" align="alignnone" width="500"]
Boron Nitride Coating for Aluminum Launders[/caption]
Without appropriate surface protection, aluminum can gradually adhere to refractory surfaces. Repeated metal buildup, oxidation residue, and mechanical cleaning may damage the refractory lining, increase maintenance requirements, and interrupt production.
Boron nitride (BN) coating provides a practical surface-treatment solution. Its hexagonal crystal structure gives it excellent lubricating properties, while its non-wetting behavior helps prevent molten aluminum from spreading and sticking to treated surfaces.
For aluminum foundries, properly applied BN coating can help:
- Reduce molten aluminum adhesion and metal buildup inside launders.
- Make residual aluminum easier to remove during maintenance.
- Reduce mechanical damage caused by repeated scraping and cleaning.
- Protect refractory contact surfaces from direct metal adhesion.
- Maintain a smoother metal-contact surface during casting operations.
- Reduce unnecessary maintenance interruptions.
AdTech China supplies boron nitride coatings for aluminum casting applications, including launder systems, filter boxes, caster tips, and hot-top components. Its BN coating product range is designed for aluminum foundries that require reliable non-stick surface protection.
However, coating performance depends on more than the BN material itself. Substrate compatibility, coating thickness, application quality, drying conditions, molten aluminum temperature, and flow velocity all influence the service performance.
This guide explains how to apply boron nitride coating to aluminum casting launders, from initial surface preparation to final inspection and routine maintenance.
1. What Is Boron Nitride Coating and Why Is It Suitable for Aluminum Launders?
Boron nitride coating is a functional ceramic-based surface coating containing boron nitride particles, usually based on hexagonal boron nitride (h-BN), together with a suitable inorganic binder or other formulation components.
Hexagonal boron nitride is often called white graphite because its layered crystal structure provides excellent lubricity. Unlike conventional black graphite, boron nitride is white and electrically insulating.
Its properties make it useful in high-temperature industrial applications where molten metals must move across equipment surfaces without excessive adhesion.
1.1 Non-Wetting Properties Against Molten Aluminum
One of the most important reasons for using BN coating in aluminum casting is its non-wetting behavior.
Molten aluminum can adhere to many refractory and metallic surfaces, especially when surface conditions, temperature, and process parameters are unfavorable.
An appropriate boron nitride coating creates a functional barrier between the molten aluminum and the underlying substrate.
Instead of spreading easily across the coated surface, molten aluminum tends to have less tendency to wet and adhere to it.
This is particularly useful in:
- Aluminum transfer launders.
- Molten aluminum runners and troughs.
- Distribution launders.
- Launder dams.
- Refractory-lined metal transfer channels.
- Selected filter-box walls and other aluminum-contact components.
The coating helps reduce aluminum accumulation and makes maintenance cleaning easier.
1.2 High-Temperature Stability
Aluminum casting equipment operates under elevated temperatures, and its surface-protection materials must remain suitable throughout the relevant thermal cycle.
Boron nitride has excellent thermal stability, but the actual working temperature of a commercial BN coating depends on its binder system, formulation, and atmosphere.
This distinction is important.
The maximum temperature of pure boron nitride should not automatically be treated as the maximum service temperature of a finished water-based coating.
When selecting a product, aluminum foundries should verify its specified continuous operating temperature and oxidation resistance using the manufacturer's technical data sheet.
1.3 Chemical Protection and Surface Lubricity
In addition to reducing metal adhesion, BN coatings provide a protective interface between aluminum and the underlying refractory or metal component.
This can help reduce direct contact between molten aluminum and the substrate.
For launders with frequent metal buildup, the resulting reduction in cleaning difficulty can be valuable because aggressive mechanical cleaning may gradually damage the lining.
1.4 A Cleaner Alternative to Some Traditional Release Materials
Graphite-based materials are used in various metallurgical applications, but they may not always be the preferred choice for aluminum processes that require clean, light-colored contact surfaces.
Boron nitride offers several advantages:
| Property | Boron Nitride Coating | Traditional Graphite-Based Coating |
|---|---|---|
| Appearance | White | Black or dark gray |
| Lubricity | Excellent | Excellent |
| Electrical properties | Insulating | Conductive |
| Non-wetting behavior | Excellent with suitable formulations | Depends on formulation and conditions |
| Surface cleanliness | Does not produce black graphite residue | May leave dark residues |
| Aluminum casting applications | Launders, tools, refractory surfaces, and casting components | Selected release and lubrication applications |
The correct choice depends on alloy requirements, application temperature, substrate material, contamination-control requirements, and operating conditions.
2. Where Should Boron Nitride Coating Be Applied on an Aluminum Launder?
Not every external surface of a launder needs BN coating.
The most important application areas are the surfaces that come into direct contact with molten aluminum and are susceptible to metal adhesion or buildup.
2.1 Inner Walls of Aluminum Transfer Launders
The bottom and sidewalls of the launder channel are the primary application areas.
These surfaces continuously contact flowing molten aluminum. If aluminum accumulates on the refractory lining, the effective flow area may decrease and local flow conditions can become less predictable.
A suitable BN coating helps create a more non-wetting contact surface and simplifies subsequent cleaning.
2.2 Launder Bottoms and High-Wear Sections
The bottom of the launder is exposed to continuous metal flow.
Certain sections may experience higher flow velocity, metal impact, or repeated thermal loading.
These locations should receive particular attention during coating inspection and maintenance.
2.3 Launder Joints and Transition Areas
Metal transfer joints, bends, and transitions can be vulnerable to local aluminum accumulation.
Where the construction design permits, appropriate BN coating can be applied to the exposed refractory contact surfaces.
However, coating is not a substitute for repairing open joints, cracks, gaps, or damaged refractory material.
Structural defects must be repaired using a compatible refractory repair material before applying the functional coating.
2.4 Distribution Launders and Launder Dams
Distribution launders divide molten aluminum into different casting channels or production lines.
Launder dams control the direction and flow of the metal.
Their molten aluminum contact surfaces may also benefit from suitable BN surface protection, especially when aluminum buildup interferes with consistent flow or increases cleaning work.
2.5 Connection with Filtration Equipment
In many aluminum casting plants, a launder is connected to an online filtration system.
The transfer system may include:
- Aluminum degassing units.
- Ceramic foam filter boxes.
- Distribution channels.
- Flow-control components.
- Casting machine connections.
BN coating can be considered for appropriate metal-contact walls of associated equipment when the product is approved for that application.
However, BN coating does not replace ceramic foam filtration, and it should not be applied directly to ceramic foam filter media unless the filter and coating manufacturers specifically approve the application.
The coating's purpose is surface protection and non-wetting performance, not the removal of hydrogen or solid inclusions.
3. How to Apply Boron Nitride Coating to Aluminum Casting Launders: Step-by-Step Guide
The coating process should be managed as a controlled maintenance or equipment-preparation operation.
The following procedure describes the general application principles. Exact mixing, dilution, film thickness, drying, and preheating requirements must follow the technical data sheet for the selected BN coating grade.
Step 1: Shut Down the Casting Process and Prepare the Launder
Before applying BN coating, the launder must be taken out of service.
All molten aluminum must be safely drained or removed according to the foundry's established maintenance procedures.
Allow the equipment to reach a safe working condition.
Never apply a water-based BN coating directly to a launder containing molten aluminum or to an operating metal-transfer channel.
Any retained moisture can create an extremely dangerous condition when it comes into contact with molten aluminum.
Workers should follow the foundry's molten-metal safety procedures, equipment isolation requirements, and the coating manufacturer's safety data sheet.
Step 2: Inspect the Refractory Surface
Before cleaning or coating, inspect the entire inner lining.
Look for:
- Cracks and surface fractures.
- Loose refractory particles.
- Spalled or damaged lining.
- Aluminum buildup.
- Old coating residues.
- Oil, grease, and other contaminants.
- Damaged joints or exposed base material.
This step is essential because BN coating is a functional surface treatment, not a refractory construction material.
If the lining has cracks, substantial wear, or loose sections, repair the affected area first using an appropriate refractory repair material.
For example, AdTech supplies refractory repair materials for the construction and repair of launders, filter boxes, distribution plates, and other molten aluminum-contact equipment.
Applying BN coating over a damaged or unstable refractory layer will not solve the underlying problem.
Step 3: Clean and Dry the Surface Thoroughly
Surface preparation directly influences coating adhesion.
Remove loose aluminum residue, dross, dust, old coating, and other contaminants using suitable mechanical cleaning methods.
Depending on the substrate, this may include:
- Industrial vacuum cleaning.
- Dry brushing.
- Appropriate scraping tools.
- Controlled mechanical surface preparation.
- Removal of loose refractory particles.
The surface must be clean, stable, and dry before coating.
Oil, grease, loose particles, and old coating residues can prevent the new coating from bonding properly.
For smooth metallic surfaces, light surface roughening may be beneficial when recommended by the coating manufacturer.
For refractory surfaces, avoid aggressive preparation that could damage the lining.
Important: Do not use a wet-cleaning method unless the substrate can subsequently undergo the complete drying procedure specified by the refractory and coating manufacturers.
Step 4: Select the Correct Boron Nitride Coating
Not all BN coatings are identical.
Commercial products may use different binders, solids contents, particle sizes, and formulations.
Some are designed for spraying, while others are more suitable for brushing, dipping, or applications requiring a harder dried film.
Before application, evaluate the following:
| Selection Factor | What the Foundry Should Check |
|---|---|
| Substrate | High-alumina refractory, silica-based material, ceramic, graphite, or metal |
| Operating temperature | Actual continuous service temperature and peak temperature |
| Binder system | Compatibility with the substrate and operating atmosphere |
| Application method | Spray, brush, sponge, or other approved method |
| Coating concentration | Suitable solids content and viscosity |
| Drying requirements | Air drying, forced drying, or controlled preheating |
| Metal-contact conditions | Flow velocity, impact, erosion, and contact duration |
| Alloy requirements | Cleanliness and contamination-control requirements |
For example, AdTech's Dope-BN30 boron nitride coating is designed for aluminum casting functional materials that contact molten aluminum.
It is intended for applications including launders, filter boxes, caster tips, and hot-top casting components.
The product can be applied by spraying, brushing, or wiping to form a protective film after drying.
Selecting the correct coating grade is the first step toward achieving stable performance.
Step 5: Mix and Dilute the BN Coating
Boron nitride particles may settle during storage.
Therefore, thoroughly mix the coating before use to restore a uniform suspension.
If dilution is required, add clean water gradually according to the manufacturer's technical instructions.
Do not add excessive water simply to make the coating easier to spray.
Excessive dilution can change the solids content, coverage, and resulting film characteristics.
For reference, AdTech's published instructions for its concentrated BN Paste (BN-P) specify:
| Application Method | Published Dilution Guidance |
|---|---|
| Brushing | BN Paste : Water = approximately 1:3 to 1:5 |
| Spraying | BN Paste : Water = approximately 1:6 |
These figures are specific to the published BN Paste instructions. They should not automatically be used for every BN coating formulation, including Dope-BN30 or products from other manufacturers.
Always confirm the dilution ratio for the exact product being used.
If the coating is too thick, it may be difficult to achieve an even layer. If it is too thin, the resulting dry film may not provide the intended coverage.
The working mixture should have consistent viscosity and no visible large agglomerates.
Step 6: Apply a Thin and Uniform Coating
For aluminum casting launders, spraying is often a practical method because it can cover long channels and relatively large refractory surfaces efficiently.
Brushing is useful for corners, edges, joints, and smaller areas.
Both methods can produce suitable results when applied correctly.
A. Spray Application
Spraying is appropriate for long launder channels and large coating areas.
Recommended general practices include:
- Use clean spray equipment compatible with the coating.
- Ensure the working mixture is thoroughly mixed.
- Maintain a consistent spray distance and angle.
- Use controlled, overlapping passes.
- Avoid excessive material buildup in one location.
- Allow each layer to dry according to the product instructions before applying another layer, if multiple layers are required.
The purpose is to create a thin, consistent film rather than a thick white layer.
B. Brush Application
Brush application is useful when treating:
- Narrow corners.
- Launder edges.
- Irregular surfaces.
- Small repair areas.
- Areas that are difficult to reach using spray equipment.
Use a suitable soft brush and apply the coating evenly.
Avoid repeatedly brushing a partially dried coating because this may disturb the underlying film.
Where multiple layers are permitted, allow each layer to dry before applying the next.
C. Sponge or Wipe Application
For selected components and small areas, a sponge or suitable wiping tool can provide good control over coating distribution.
This method is appropriate when the coating manufacturer's instructions permit it.
Step 7: Control the Coating Thickness
One of the most common reasons for BN coating failure is excessive coating thickness.
A thick layer does not necessarily provide better protection.
Instead, excessive buildup may cause:
- Drying cracks.
- Surface peeling.
- Poor adhesion.
- Uneven drying.
- Loose coating particles.
- Premature coating failure during thermal cycling.
Multiple thin applications are generally preferable to one excessively thick application.
The final coating should form a continuous and uniform surface without obvious pools, lumps, cracks, or loose material.
The correct dry-film thickness depends on the BN formulation and the specific substrate.
For example, AdTech's published BN Paste guidance identifies a recommended film thickness of approximately 20–50 microns for that product.
This should not be regarded as a universal specification for every BN coating.
Step 8: Allow the Coating to Dry Completely
Drying is one of the most important stages in the entire process.
A water-based coating contains liquid that must be removed before the surface contacts molten aluminum.
Residual moisture can rapidly turn into steam when exposed to molten metal, creating a serious splash and safety hazard.
Depending on the formulation, the drying process may involve:
- Ambient air drying.
- Controlled forced-air drying.
- A specified preheating cycle.
- Additional thermal conditioning.
For AdTech's published BN Paste guidance, the stated procedure includes approximately 30 minutes of ambient drying followed by preheating at about 300°C for 20 minutes before molten-metal contact.
However, this is product-specific.
Some commercial BN coatings require complete air drying without an additional temperature-curing step. Other formulations require a different thermal procedure.
Therefore, do not assume that every BN coating must be baked at 300°C.
The exact drying and preheating schedule should be confirmed using the current technical data sheet for the selected product.
Step 9: Inspect the Coated Launder Before Operation
After the coating has dried, inspect the entire treated surface.
A properly applied coating should generally have:
- Uniform visual coverage.
- No obvious bare patches.
- No thick deposits.
- No visible cracks or peeling.
- No loose powder or unstable residues.
- No contamination from maintenance tools.
If a section is damaged or poorly covered, repair the affected area using the approved application procedure.
Before introducing molten aluminum, ensure the launder has also completed the refractory dry-out and preheating procedure required for that equipment.
The coating drying schedule does not replace the refractory lining's commissioning or moisture-removal requirements.
4. Spray vs. Brush: Which Application Method Is Better for Aluminum Launders?
Both spray and brush methods can be used to apply BN coating.
The best option depends on the launder design, surface condition, required coverage, and available maintenance equipment.
| Comparison | Spray Application | Brush Application |
|---|---|---|
| Large surface areas | Excellent | Less efficient |
| Long launder channels | Suitable | More labor-intensive |
| Complex corners | Requires careful spray positioning | Good control |
| Coating uniformity | Good with proper technique | Depends on operator skill |
| Material consumption | Can be affected by overspray | Easier to control locally |
| Equipment requirements | Spray gun and mixing equipment | Brush and mixing container |
| Application speed | Generally faster for large areas | Generally slower |
| Maintenance touch-ups | Suitable | Very convenient |
Practical recommendation:
For long aluminum transfer launders, spray application is often the preferred method for achieving consistent coverage.
Brush application is useful for corners, edges, joints, and localized repairs.
Some foundries use both methods in the same maintenance operation.
The important factor is not simply the application method, but achieving a properly bonded, thin, and fully dried coating.
5. Common Problems When Applying BN Coating to Aluminum Launders
Even high-quality boron nitride coatings may fail prematurely if the surface preparation or application process is incorrect.
Understanding the common causes helps foundries reduce unnecessary coating consumption and maintenance interruptions.
| Problem | Possible Cause | Recommended Action |
|---|---|---|
| Coating peels off | Surface contamination or poor substrate compatibility | Clean the surface and verify the coating grade |
| Coating cracks during drying | Excessive application thickness | Use thinner layers and control dilution |
| Uneven coating | Inconsistent spraying or mixing | Remix and apply controlled overlapping passes |
| Poor adhesion on the first layer | Dust, grease, or unsuitable surface condition | Reinspect and prepare the substrate |
| Upper coating layer separates | Previous layer was not completely dry | Allow sufficient drying between layers |
| Aluminum still sticks | Worn coating, incomplete coverage, or unsuitable product | Inspect the coating and verify application parameters |
| Coating washes away quickly | Inadequate adhesion, excessive flow impact, or incorrect drying | Check the formulation, substrate, and operating conditions |
| Premature coating deterioration | Thermal cycling, chemical exposure, or erosion | Review the application and operating environment |
5.1 Why Does BN Coating Peel Off After Application?
Peeling is usually related to poor adhesion or excessive coating thickness.
If the refractory surface contains dust, old coating, grease, or loose particles, the new coating may not bond properly.
A second common cause is applying an additional layer before the first layer is completely dry.
To prevent peeling, clean the substrate thoroughly and follow the manufacturer's recommended coating thickness and drying conditions.
5.2 Why Does Boron Nitride Coating Crack During Drying?
Thick coatings tend to shrink unevenly as water evaporates.
The resulting internal stress can cause cracks.
This problem is especially likely when an operator attempts to achieve the desired coating coverage with one heavy application.
A better approach is to apply a thinner, more uniform film and allow sufficient drying between coats.
5.3 Why Does Molten Aluminum Still Stick to a BN-Coated Launder?
Possible reasons include:
- The coating has worn away.
- Some areas were not adequately covered.
- The coating was excessively diluted.
- The binder is incompatible with the substrate.
- The coating was not completely dry.
- The selected grade does not match the actual temperature or process conditions.
- Excessive metal impact or flow abrasion has damaged the protective layer.
However, molten aluminum buildup is not always caused by a coating problem.
In some situations, inadequate launder preheating, poor thermal insulation, unsuitable channel geometry, or excessive temperature loss can cause aluminum to solidify or accumulate.
BN coating cannot correct these underlying process problems.
A proper diagnosis should consider both surface protection and the wider molten aluminum transfer system.
6. How Often Should Boron Nitride Coating Be Reapplied to Aluminum Launders?
There is no universal reapplication interval for BN coating.
Its service life depends on several operating conditions:
- Molten aluminum temperature.
- Metal flow velocity.
- Casting duration.
- Launder geometry.
- Refractory surface condition.
- Coating formulation and binder.
- Application thickness and drying quality.
- Frequency of thermal cycling and cleaning.
A low-flow transfer channel may retain its coating longer than a high-impact section near a metal inlet or transition.
Similarly, a properly prepared refractory surface may provide better coating retention than a damaged or contaminated surface.
For this reason, foundries should establish a maintenance-based inspection schedule rather than relying on a fixed number of hours for every launder.
During planned production interruptions, operators should inspect:
- Launder bottoms.
- Metal inlet sections.
- Bends and transition areas.
- Distribution sections.
- High-impact areas.
- Frequently cleaned sections.
Reapply the coating when the protective film shows significant wear or when exposed substrate areas appear.
Always perform recoating only after the equipment has been safely removed from service and prepared under the approved maintenance procedure.
7. Boron Nitride Coating vs. Refractory Repair Mud: What Is the Difference?
These two materials serve different purposes in aluminum casting operations.
Although both can be used on molten aluminum equipment, they should not be treated as interchangeable products.
| Item | Boron Nitride Coating | Refractory Repair Mud |
|---|---|---|
| Primary function | Surface protection and non-wetting treatment | Refractory construction and repair |
| Main application | Existing metal-contact surfaces | Cracks, damaged linings, and refractory repairs |
| Main benefit | Reduces aluminum adhesion | Restores refractory integrity |
| Typical application areas | Launders, filter boxes, caster tips, and hot-top components | Launders, distribution plates, filter boxes, degassing boxes, and furnace linings |
| Application purpose | Creates a thin functional coating | Repairs or builds refractory material |
| Typical thickness | Thin surface film | Depends on repair requirements |
| Selection criteria | Non-wetting performance and coating compatibility | Adhesion, refractory compatibility, and mechanical integrity |
When Should an Aluminum Foundry Choose BN Coating?
Choose BN coating when the refractory lining is structurally sound but molten aluminum adhesion, buildup, or difficult cleaning is a problem.
It is particularly useful for metal-contact surfaces where a non-wetting protective layer is required.
When Should an Aluminum Foundry Choose Refractory Repair Mud?
Choose refractory repair mud when the launder has cracks, worn sections, damaged joints, or other defects that require physical repair.
A damaged lining should not simply be covered with BN coating.
The correct sequence is generally:
Inspect the refractory → Repair damaged areas → Allow the repair material to dry or cure → Prepare the surface → Apply the appropriate BN coating → Complete the required drying and preheating procedure.
AdTech China supplies both BN coating and refractory repair materials, allowing foundries to select the appropriate material according to whether the problem is surface adhesion or refractory damage.
8. How to Improve Aluminum Launder Performance Beyond BN Coating
Boron nitride coating is an important surface-protection option, but it is only one part of a reliable molten aluminum transfer system.
A well-designed launder system must also maintain suitable temperature conditions, controlled metal flow, and effective melt purification.
8.1 Maintain Proper Launder Preheating
A launder that has not been adequately dried and preheated may experience excessive heat loss when molten aluminum enters the channel.
This can lead to local solidification and aluminum buildup.
The launder should be preheated according to the refractory manufacturer's commissioning procedure.
Avoid rapid or uncontrolled heating that may damage the refractory lining.
8.2 Reduce Turbulence During Aluminum Transfer
Excessive turbulence can disrupt the oxide film on molten aluminum and increase the possibility of oxide-film entrainment.
Good launder design should therefore consider:
- Channel cross-sectional dimensions.
- Metal flow rate.
- Flow velocity.
- Channel slope.
- Transition geometry.
- Inlet and outlet configurations.
- Metal distribution requirements.
BN coating can help reduce surface adhesion, but it cannot eliminate oxide formation caused by poor flow conditions.
8.3 Combine Launder Systems with Online Degassing and Filtration
In high-quality aluminum casting, molten aluminum purification is generally performed through multiple complementary processes.
An integrated production line may include:
- Controlled furnace tapping.
- Molten aluminum transfer through insulated launders.
- Online rotary degassing to remove dissolved hydrogen.
- Ceramic foam filtration to remove non-metallic inclusions.
- Controlled distribution to the casting machine.
Each stage has a different function.
BN coating protects designated equipment surfaces against metal adhesion.
Degassing equipment reduces dissolved hydrogen.
Ceramic foam filters remove solid inclusions from molten aluminum.
These technologies work together but should not be confused with one another.
For foundries producing aluminum billets, slabs, rolling ingots, aluminum foil stock, and other high-cleanliness products, combining reliable transfer equipment with appropriate melt-treatment technology can help improve process consistency.
9. Why Choose AdTech China for Boron Nitride Coating and Aluminum Launder Solutions?
For aluminum foundries, choosing a coating supplier should involve more than comparing prices per kilogram.
The coating must match the refractory material, molten aluminum contact conditions, application method, and maintenance requirements.
AdTech China specializes in molten aluminum filtration, purification, and transfer solutions.
Founded in 2012, AdTech supplies products for aluminum casting and rolling operations, including boron nitride coatings, refractory repair materials, molten aluminum launder systems, online degassing equipment, ceramic foam filters, and hot-top casting accessories.
9.1 AdTech Boron Nitride Coating for Aluminum Casting
AdTech BN Coating (Dope-BN30) is designed for functional materials that come into contact with molten aluminum.
Its intended applications include:
- Aluminum casting launders.
- Refractory filter boxes.
- Caster tips.
- Hot-top casting components.
- Other suitable molten aluminum-contact surfaces.
The coating can be applied by spraying, brushing, or wiping to create a protective surface film after drying.
Its primary purpose is to reduce metal sticking and protect the treated components.
9.2 AdTech Aluminum Launder Systems
AdTech also supplies aluminum launder systems and related components for molten aluminum transfer.
The product range includes:
- Integrated Aluminum Launder Systems.
- Removable Launders.
- Launder Troughs.
- Launder Dams.
- Distribution Launders.
These systems are designed to transport and distribute molten aluminum between furnaces, online treatment equipment, and casting or rolling operations.
The combination of appropriate launder materials and suitable surface protection can help foundries address metal buildup, maintenance requirements, and molten aluminum handling challenges.
9.3 Integrated Products for Aluminum Melt Purification
In addition to BN coating and launder equipment, AdTech supplies complementary products for aluminum melt treatment.
| Product | Main Function |
|---|---|
| Boron Nitride Coating | Non-wetting surface protection |
| Refractory Repair Mud | Repair and construction of refractory components |
| Molten Aluminum Launder | Molten aluminum transfer and distribution |
| Online Degassing Equipment | Dissolved hydrogen removal |
| Ceramic Foam Filter | Solid inclusion removal |
| Flow Control Components | Molten aluminum flow regulation |
| Hot-Top Casting Accessories | Supporting DC casting operations |
This product range allows AdTech to support customers looking for individual consumables as well as integrated aluminum casting equipment.
For foundries evaluating a BN coating for their existing launder systems, AdTech can help identify the appropriate product and discuss application conditions based on the substrate, contact temperature, and coating method.
10. Frequently Asked Questions About Boron Nitride Coating for Aluminum Launders
Q1. Why is boron nitride coating used on aluminum casting launders?
Boron nitride coating is used to create a non-wetting protective surface on aluminum casting launders. It helps reduce molten aluminum adhesion, metal buildup, refractory damage caused by repeated cleaning, and maintenance requirements.
Q2. Can boron nitride coating be applied directly to refractory launders?
Yes. Suitable BN coatings can be applied to compatible refractory materials used in aluminum launders.
The refractory surface must be clean, stable, and dry. Damaged areas should be repaired before applying the coating.
Q3. Should BN coating be sprayed or brushed onto aluminum launders?
Both methods are suitable when permitted by the coating manufacturer.
Spraying is generally more efficient for long launder channels and large surfaces because it allows more consistent coverage. Brushing is useful for corners, edges, and localized treatment areas.
Q4. What is the correct dilution ratio for boron nitride coating?
The correct ratio depends on the formulation and application method.
For AdTech BN Paste (BN-P), the published guidance specifies approximately 1:3 to 1:5 for brushing and approximately 1:6 for spraying, using the paste-to-water ratio.
These figures should not be applied automatically to other BN coating grades. Always confirm the current technical data sheet for the selected product.
Q5. How thick should a BN coating layer be?
The coating should form a thin, continuous, and uniform protective film.
AdTech's published BN Paste instructions recommend approximately 20–50 microns for that product. Other formulations may require different film thicknesses.
A thick layer is not necessarily more effective. Excessive coating thickness can cause cracking, peeling, and premature failure.
Q6. Does boron nitride coating need to be baked before using the launder?
It depends on the coating formulation.
Some products require complete air drying, while others specify additional controlled preheating.
For example, AdTech's published BN Paste instructions specify approximately 300°C for 20 minutes after ambient drying. This schedule is product-specific and should not be assumed to apply to all BN coatings.
Q7. Can BN coating prevent molten aluminum from sticking to refractory surfaces?
Yes. Suitable BN coatings reduce the tendency of molten aluminum to wet and adhere to treated surfaces.
However, actual performance depends on coating formulation, application quality, substrate compatibility, and operating conditions.
Q8. Can BN coating repair cracks in aluminum launders?
No. BN coating is a surface-protection material, not a structural refractory repair material.
Cracks, damaged linings, and open joints should first be repaired using a compatible refractory repair material.
BN coating can then be applied to the prepared surface when appropriate.
Q9. How long does boron nitride coating last on aluminum launders?
There is no universal service life.
Performance depends on molten aluminum flow velocity, operating temperature, contact duration, surface condition, coating formulation, and maintenance practices.
High-impact areas may require more frequent inspection and touch-up than relatively stable sections.
Q10. Can BN coating be used with a ceramic foam filtration system?
Yes. Suitable BN coating can be applied to approved metal-contact surfaces of filter boxes and associated equipment.
However, applying BN coating directly to ceramic foam filter media is a different application and should not be done unless specifically approved by the relevant manufacturers.
BN coating does not replace ceramic foam filtration.
Q11. Is boron nitride coating suitable for continuous aluminum casting?
Yes. Suitable BN coating grades can be used on compatible launders and other metal-contact components in continuous aluminum casting operations.
The coating should be selected according to continuous operating temperature, thermal cycling, flow conditions, and substrate compatibility.
Q12. Where can aluminum foundries buy boron nitride coating for launders?
Aluminum foundries can source boron nitride coatings from specialized aluminum casting materials manufacturers.
AdTech China supplies BN coating for aluminum casting applications, together with aluminum launder systems, refractory repair materials, online degassing equipment, ceramic foam filters, and related casting products.
Customers can contact AdTech to discuss the coating grade, substrate, application method, and operating conditions before purchasing.
Conclusion
Applying boron nitride coating to aluminum casting launders is a practical method of improving molten aluminum non-wetting performance and protecting refractory contact surfaces. The most important factors are correct substrate preparation, suitable coating selection, controlled dilution, thin and uniform application, and complete drying before molten aluminum contact.
For aluminum foundries, BN coating should be considered as part of a broader molten aluminum handling strategy rather than as an isolated maintenance product. Proper launder design, refractory integrity, preheating, flow control, degassing, and filtration all contribute to stable casting operations.
AdTech China provides boron nitride coatings, refractory repair materials, aluminum launder systems, molten aluminum degassing equipment, and ceramic foam filters for aluminum casting and rolling applications.
By combining appropriate surface protection with reliable molten aluminum transfer and purification equipment, aluminum foundries can work toward cleaner metal handling, easier equipment maintenance, and more consistent production performance.
Contact AdTech China for Boron Nitride Coating and Aluminum Launder Solutions.
Emai:[email protected] Whatsapp: +86 15237123176
