How Do You Choose a Metal Roof That Lasts Through Years of Harsh Weather?
Author : Susan Armadale | Published On : 18 Nov 2026
If issues occur with your roof, such as getting damp to the ceiling tiles, some roof panelling becoming loose following a storm, or if you’re noticing that the roof may no longer be as reliable due to the building aging, it is important you address the issue quickly. If issues are left unresolved with the roof, they can become very expensive.
Metal roofs are popular due to their durability and low maintenance. However, when choosing a metal roof, there are different factors to consider to ensure it is best suited to the building. This includes the type of metal, standing seam metal roof installation, roof pitch, drainage, and condition of the building.
Standing Seam Roofs
This type of metal roof differs from traditional exposed fastening metal roofs. By locking the panels together in a raised seam, the number of exposed fixings within the roof are greatly reduced. This means that the roof has a neater appearance and less potential leak points.

Even with high-quality panels, if they are not installed correctly you may encounter the same problems as with a cheaper roof. Be sure to understand this before installation.
Differences Between Standing Seam Roofs and Exposed Fastening Metal Roofs
With an exposed fastening metal roof, the panels are fixed in place using screws. These go through the panels and into the roof structure. Washers are typically used in conjunction with the screws to reduce water ingress.
Over time however, these can degrade. Screws can also become loose due to thermal expansion/contraction, vibration and exposure to the elements. If this occurs, water can begin to enter the roof. Although only a small amount may be entering at first, this can cause damage to insulation, ceiling materials, equipment and other parts of the building.
Standing seam roof panels are locked in place by raised seams between the panels. Fixings are typically not exposed depending on the panel type. Many systems will also include a clip fixing so that the panels can expand and contract with temperature changes.
Thermal expansion is very important to consider. As the metal heating up, it will expand and when it is cooled, it will contract. A roof must be able to allow this to happen.
There are a variety of different standing seam roof systems available, depending upon the profile of the seam and fixing method. Common systems include snap lock and mechanically seamed. The type of system chosen will depend on the building design, roof pitch, wind exposure and manufacturer specification.
Do not choose a panel profile purely based on visual appeal. Ensure that the roof system is suitable for the building.
Preparation
Before installing the new metal roof panels, there are many considerations to make.
A contractor should fully inspect the roof. They should check the roof deck, supporting structure, current insulation, flashing, drainage, and any signs of water damage. If the original roof materials are old, there may be underlying issues that may not be visible until removal of the existing roof.
This is extremely important in commercial and industrial buildings. If it is a warehouse, production unit or agricultural building, there may be equipment, stock and staff in the building below. If a roofing issue occurs, it could cause a large issue.
Measurements
Careful consideration must be made to roof measurements. The length of panels, roof transitions, roof openings, valleys and eaves must be taken into account. As panels are often manufactured to specific lengths, incorrect measurements could lead to delays in installation and unnecessary wastage.
Ventilation and Insulation
Although fitting a new roof, condensation within the building may still be an issue. If warm and moist air is trapped against cold metal surfaces, condensation can form. This can cause issues with insulation and cause corrosion.
Before installation, consideration should be given to the material, colour, thickness, fixing system and guarantee of the roof. Be sure to ask questions. With the correct knowledge of the system, your contractor should be able to give you information regarding all of these features simply.
Installation of Standing Seam Metal Roofs
Several steps should be performed in order to correctly install a standing seam metal roof. Firstly, the roof deck (or suitable structure) must be prepared. Any damaged areas must be resolved.
An underlay should be applied, depending on the roofing system chosen and the manufacturer's specifications. In some cases, extra protection or heat resistant underlay may be required. This will depend on the roof pitch, climate and choice of roofing material.
Panel Layout
Ensure panels are laid out carefully. Panels must be lined up in order to produce straight seams and a uniform roof. If misaligned, this can be more noticeable as the installation continues.
Fixings (or suitable components) should be placed in line with specifications of the system. These will help to secure the panels in place, but allow expansion and contraction due to temperature changes.
Panels in Place
Depending on the design, panels can be clicked into place or may need to be mechanically seam welded. For mechanically seamed systems, specialist equipment is used to securely join panels together.
Flashing
Appropriate detailing must be added around the edges of the roof, ridge, valley, skylights, vents, pipework and wall transitions. As water can pool and change direction in these areas, it is very important that they are well detailed.
Once installed, a visual inspection should be carried out. Check seams, flashing, fixings, drainage routes and openings. Just because the roof looks good from outside (i.e. car park), does not mean it has been fitted correctly.
Metal Roofs Developing Leaks
This is a commonly asked question. Why are leaks occurring in metal roofs?
Although metal roofs are durable, issues can occur. No roof is completely maintenance free.
Leaks may occur due to poor flashing installation, openings in the roof, damaged panels, poor sealing of transitions and incorrect drainage. Severe weather such as storms may cause damage to components of the roof, particularly if debris has hit the roof or if strong winds have got underneath vulnerable edges of the roof.
Thermal expansion can also cause issues. If panels within the roof cannot expand and contract as intended, pressure can build in joints and other components.
Internal Gutters
Many commercial and industrial buildings include internal gutter systems. If these become blocked, corroded or damaged, water may begin backing up and causing water to enter the building. Often, this may not be caused by issues with the panels themselves.
Due to this, if a roof is leaking, it may not be necessary to replace the panels. It is important to investigate where the water is coming from.
When to Repair Leaks in a Metal Roof
Sometimes it is possible to repair leaking roofs without replacing the panels. It is important to understand whether it is a small issue, or the roof may be failing as a whole.
If there is minor damage to flashing, loose joints or small holes in panels, it may be possible to repair the roof without replacing sections of it. If panels are still in good condition and the supporting structure is sound, it may be more practical to repair the leaking roof.
However, if multiple leaks are occurring in different places, or there is extensive corrosion, damage to panels, and degraded seams, it may be that the roof is nearing the end of its useful life.
Patching up issues in this way is not a long term solution. Although applying sealant to all visible issues may temporarily stop water entering, the reason for the water entering the building may not be resolved.
A qualified roofing contractor should be consulted to assess the area and surrounding components. They should be able to determine whether the repair will be effective. Ensure that the repair method is compatible with the existing metal roof material. Using incorrect products can cause additional issues.
We do not want to recommend replacing a roof unnecessarily. However we do not want you to be continually spending money on repairs that are not fixing the underlying issue.
Ways to Value Your Metal Roof Investment
To value your metal roof investment, regular checks should be made. Issues can be caught early to prevent expensive repairs.
Check for issues around roof openings, flashing, gutters, downpipes, panel edges and pooling. Following extreme weather, it is a good idea to have a check carried out. If the property has been subject to high winds, hail or flying debris, this would be a good idea.
Ensure gutters and downpipes are clear. Leaves, dirt, branches and other debris can cause blockages. In properties with internal gutters, regular maintenance is very important as issues with the drainage may not be visible until water begins to enter.
Avoid unqualified individuals walking across the roof or making random repairs. Improper walking across panels can cause damage. Incompatible sealants or coatings can cause further issues.
Keeping a record of inspections, repairs and installation details can also be helpful. Knowing what materials were used, and when particular components were replaced will make future maintenance easier.
If you are considering fitting a new roof, it is important to work with experienced metal building contractors. The quality of installation, choice of materials, and attention to detail all play key roles in how well the metal roof system will perform.
Conclusion
Standing seam metal roofing systems can be a great long term solution to protect commercial, industrial, agricultural and residential buildings. As they have hidden fixings, and interlocking seams, with consideration for thermal expansion, they make a great choice for reliable protection from the weather.
However, if not installed correctly, issues may arise. Incorrect measurements, poor flashing, inadequate drainage and incorrect fixing can cause issues to appear months or even years down the line. Timely metal roof leak repair can help prevent water damage from spreading and protect the building's insulation and internal structure.
Be sure to thoroughly inspect your current roof, understand the options available and choose a contractor with knowledge of how metal roof systems work. Do not just choose based on cost; although you may be saving money initially, costs may add up quickly.
At Metalguard, we provide installation, repair and renovation services for metal buildings and metal roofs. Whether you need a new roof installed, or need a repair to a leaking roof, identifying the root of the problem is key.
A roof should be a reliable asset to your building. Ensuring details are correct from the start of installation, and regularly monitoring the roof will help to make this true.
FAQs
Standing Seam Metal Roof Lifespan
With correct design and installation, standing seam metal roofs can last for many decades. However, this can vary depending upon the type of metal material, protective coating, quality of installation, exposure to weather and maintenance.
Is Standing Seam Roofing Better Than Exposed Fastening Metal Roofing?
As standing seam roofs have hidden fixings, and there are less exposed screws, the risk of leaks is reduced. Exposed fastening metal roofs can be a good option, but generally require more regular maintenance of the fixings and washers.
Can Standing Seam Metal Roofs be Installed Over Existing Roofs?
Depending on the condition of the existing roof, capacity of the structure, building regulations and installation requirements from the manufacturer it may be possible. A proper inspection should be carried out.
What Causes Leaks in Standing Seam Metal Roofs?
Leaking can occur due to damaged flashing, poorly detailed openings in roofs, incorrectly joined seams, damage, poor drainage, and incorrect installation.
When is Metal Roof Leak Repair Required?
If water is entering through damaged panels, flashing, seams, fixings or other components of the roof, leaking roof repair may be needed. Identifying the issue early can prevent damage to insulation and building materials.
Does Standing Seam Metal Roofing Require Regular Maintenance?
Yes. Although regular maintenance is generally less than with other types of roofing systems, regular inspections, gutter clearing, checking drainage and repairing issues promptly is still important.
