Highlight of marine floating feed machine
Author : Salling Coleman | Published On : 31 Mar 2026
Today, aquatic floating feed machine modern technology is incredibly popular in the production of aquafeeds, as it can be made use of to create a variety of feeds, whether floating or sinking, relying on the needs of each species. In addition, the extruded feed made by aquatic floating feed machine has less contamination as well as high performance, aiding to enhance digestibility.Throughout the aquatic floating feed machine extrusion process, devices such as temperature level, humidity, pressure will raise starch gelatinization, disintegrate and also soften the cell wall as well as release some conveniently absorbable substances, therefore promoting the food digestion and also absorption of farmed pets.
Via marine floating feed machine extrusion technology, it is feasible to inhibit specific protease inhibitors (such as antitrypsin), damage pathogens in raw materials or modification protein buildings to further enhance the contact with enzymes in fish and shrimp, assisting to digest food much more conveniently.
Extruded feed made by marine floating feed machine can control the content of compounds and also aid far better detoxing. At wood pellet machine in Kenya , the longer stablizing time in the water (12-36 hrs) aids farmers to observe and also regulate the feeding schedule.
Although extruded feed made by floating fish feed making machine has apparent advantages over pelleted feed, the preliminary financial investment expense of extruded feed production is higher, resulting in greater feed prices.
But also for premium fish farming, more and more individuals are taking note of the market prospect of high-end fish feed.
1. Highlight of marine floating feed machine
Feeding, rotating cutting, as well as main drive all take on regularity conversion rate law system, which has solid power, secure procedure, energy saving, high marine production efficiency, resilient tools, reduced failure rate, as well as practical operation and upkeep.
The screw of floating feed machine is made from alloy product by special process, the life span is 3-4 times longer than that of domestic comparable machines, as well as the expense of generating feed is low; the fractional mixed screw is suitable for a vast array of resources and even more varied items.
Automatic lubrication system of the floating feed machine reduces mechanical energy consumption and also extends service life.
The feeding system adopts spiral forced feeding, as well as the feeding is uniform and broad. It can be equipped with an automated feeding system. The feeder is a screw conveying variable frequency rate control to adjust the feeding amount to manage the puffing output (quantitative feeding, and can properly prevent the product from curving).
Direct bearing tool adjustment system, change the tool precisely and also quickly.
The twin-screw of floating feed machine has self-cleaning feature, as well as making use of devices is a lot more affordable as well as convenient.
Update the configuration of different equipment technology and devices to make the result of the twin-screw floating feed machine bigger.
Different screws and also length-diameter proportions can meet various production procedures.
Visual automated temperature control system to make temperature control a lot more user-friendly as well as criteria a lot more accurate.
The total floating feed machine configuration The operation of the fish feed pellet extruder is much more intuitive and also the upkeep is more convenient.
Dry puffing procedure takes on self-heating method without steam system, which is a lot more in accordance with the actual requirements of customers.
No adhesive is needed to process the floating feed, and it can keep stability in water for more than 12 hrs.
Tiny as well as moderate equipment is specifically suitable for clinical study institutions, unique breeding farms or medium and tiny feed factories. There are likewise specially customized speculative twin-screw floating feed machines readily available for scientific research study devices.
2. The difference between pellet feed and also extruded feed
With the development of the floating fish feed processing industry, two commonly utilized modern technologies currently made use of to generate aquafeed are pelleting and also extrusion by floating feed machine Contrasted to natural baits, such feeds have higher nutritional material and security, less moisture, easier storage space, less pathogens, and also longer storage times.
Pelletizing by floating feed machine is a technique of pressing small pellets of basic material right into bigger pellets, throughout which humidity, temperature level as well as pressure can significantly affect the top quality of the feed.
One of the primary benefits of pelleted feed is lower production prices. Nevertheless, it has some drawbacks.
One of the most significant negative aspects of pelleted feed is that it sinks faster and dissolves rapidly in water (according to statistics, about 10-15% of feed is thrown away), which implies greater feed expenses, reduced farming revenues, as well as less complicated cause water air pollution.
3. Select pellet feed or extruded feed?
Farmers, pick pellet feed or extruded feed?
When picking feed, farmers need to think about the qualities of various aquatic species and feeding practices. Since the routine of shrimps as well as crabs is to find food at the bottom, and then consume the food gradually, so the food ought to not be as well hard as well as not conveniently soluble in water.
Consequently, extruded sediment by floating feed machine is the most effective choice because it is soft and also hard to liquify in water, as well as it is convenient for shrimp and crab to consume, lowering feed waste as well as decreasing water pollution.
Specifically in intensive shrimp farming, extruded feed needs to be dominant, because it is easier for shrimp to absorb healthy protein from extruded feed, which decreases feed waste and also promotes far better healthy protein absorption.
At the same time, we can likewise enhance the absorption price of the feed by adding useful microbes or promoting gastrointestinal items to the feed.
Nevertheless, from a long-lasting point of view, making use of extruded feed, which is made by floating feed machine will certainly raise the price, and if the fish use squeezed out feed in the mature period, it might bring about fish fat, huge tummy, inadequate anxiety capacity, not ideal for long-distance transportation, etc, causing a low price at the time of sale.
As a result, in the process of tank farming, when many farmers use feed, they typically use a mix of pellet feed and extruded feed, which not only manages water quality, reduces feed deposits, however additionally boosts efficiency and financial benefits.
At the same time, the tank farming market is advertising the additional growth of the two feeds due to their particular benefits.
4. Installation of floating feed machine.
( 1) Setup of floating feed machine pipeline shelf
The selection of the setup placement of the pipeline shelf relies on the site area, however it needs to not be as well much from the primary engine. Much from the main engine will cause waste of materials during pipe connection on the one hand, and also cause the hysteresis of the control system on the other hand.
If the installation location on site enables, the very best position of the pipeline shelf is to be straight behind the primary engine as well as conditioner, alongside the primary engine, and about 1 meter away from the main engine (there is a certain maintenance space), while guaranteeing that the pipeline shelf is readjusted upwards. The placement of the heavy steam line interface of the conditioner gets on the side of the conditioner.
In order to facilitate the cleansing of the ground as well as the outflow of drainage in the future, the pipe rack should be increased by about 10 cm throughout installment. In the installment of each shutoff in the pipeline, the setting of the shutoff wheel should satisfy the demands of convenient operation for floating feed machine.
( 2) Setup of floating feed machine control box
In order to assist in the operation, the installation position of the on-site control box must be picked near the bypass, and a particular room needs to be scheduled in between the bypass and the control box to momentarily position the wastes flowing from the bypass.
The range in between the regularity converter of the reducing motor and also the rotary positioner of the on-site cutter should not be also much. It is managed by voltage. If the range is as well much, it will cause voltage changes as well as influence the cutting impact.
The distributing temperature level display screen instrument on the on-site control box is to present the temperature of each end of the blowing cavity in real time, and the displayed temperature level sequence has particular demands. Area 2 Expansion tooth cavity ... until the product discharge growth cavity, this series needs to be taken note of when circuitry the electrical control.
Additionally, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of floating feed machine. They manage the opening of each nozzle with the electro-magnetic cut-off shutoff.
feed pellet mill in Yemen floating feed machine conditioner inlet nozzle switches over 1 to 4 on the control box represent the conditioners The 1st nozzle to the fourth nozzle from the feed end.
