Highlight of aquatic floating feed machine
Author : Peters Casey | Published On : 18 Apr 2026
Today, aquatic floating feed machine technology is very popular in the manufacturing of aquafeeds, as it can be utilized to produce a range of feeds, whether floating or sinking, depending upon the demands of each species. In addition, the extruded feed made by aquatic floating feed machine has much less contamination and high efficiency, helping to enhance digestibility.Throughout the water floating feed machine extrusion process, mechanisms such as temperature, humidity, pressure will raise starch gelatinization, decompose and soften the cell wall and launch some conveniently digestible compounds, therefore promoting the digestion and also absorption of farmed pets.
Through water floating feed machine extrusion modern technology, it is feasible to prevent particular protease inhibitors (such as antitrypsin), damage microorganisms in raw materials or change healthy protein residential properties to more improve the contact with enzymes in fish and shrimp, helping to absorb food more easily.
Extruded feed made by water floating feed machine can manage the material of compounds and help far better cleansing. At the same time, the longer stabilization time in the water (12-36 hrs) aids farmers to observe and also regulate the feeding routine.
Although extruded feed made by floating fish feed making machine has evident advantages over pelleted feed, the initial financial investment expense of extruded feed production is greater, resulting in higher feed costs.
But also for premium fish farming, increasingly more people are taking note of the marketplace possibility of premium fish feed.
1. Main features of aquatic floating feed machine
Feeding, rotary cutting, as well as primary drive all take on frequency conversion speed law system, which has solid power, stable procedure, energy saving, high aquatic manufacturing performance, sturdy tools, reduced failure rate, and also hassle-free operation and also maintenance.
The screw of floating feed machine is made from alloy product by special process, the life span is 3-4 times longer than that of domestic similar machines, and the price of producing feed is reduced; the fractional mixed screw is suitable for a variety of resources and also even more varied products.
Automatic lubrication system of the floating feed machine reduces power consumption as well as prolongs service life.
The feeding system adopts spiral forced feeding, and the feeding is uniform and broad. It can be furnished with an automatic feeding system. The feeder is a screw communicating variable regularity rate control to readjust the feeding total up to manage the puffing outcome (quantitative feeding, and can successfully stop the material from arching).
Straight bearing device adjustment system, adjust the device accurately and also promptly.
The twin-screw of floating feed machine has self-cleaning function, and also the use of equipment is much more practical as well as hassle-free.
Update the setup of numerous equipment technology as well as devices to make the outcome of the twin-screw floating feed machine larger.
Different screws and also length-diameter ratios can satisfy various production procedures.
Aesthetic automated temperature control system to make temperature control more intuitive and criteria a lot more exact.
The total floating feed machine setup The procedure of the fish feed pellet extruder is extra intuitive and also the upkeep is easier.
Dry blowing procedure adopts self-heating approach without heavy steam system, which is a lot more in line with the actual needs of individuals.
No adhesive is needed to refine the floating feed, and it can preserve stability in water for greater than 12 hours.
Little and also medium equipment is especially suitable for scientific research organizations, special breeding ranches or medium and tiny feed manufacturing facilities. There are likewise particularly customized speculative twin-screw floating feed machines available for clinical research units.
2. The difference in between pellet feed and squeezed out feed
With the advancement of the floating fish feed handling sector, two commonly used modern technologies currently utilized to generate aquafeed are pelleting as well as extrusion by floating feed machine Contrasted to all-natural lures, such feeds have higher dietary material as well as security, less dampness, less complicated storage, less pathogens, and much longer storage times.
Pelletizing by floating feed machine is a method of pressing tiny pellets of raw material right into bigger pellets, during which humidity, temperature and stress can significantly influence the high quality of the feed.
Among the primary advantages of pelleted feed is lower manufacturing expenses. Nevertheless, it has some disadvantages.
One of the most significant negative aspects of pelleted feed is that it sinks faster as well as dissolves quickly in water (according to stats, concerning 10-15% of feed is lost), which indicates higher feed costs, lower farming earnings, and also easier cause water contamination.
3. Select pellet feed or extruded feed?
Farmers, pick pellet feed or extruded feed?
When selecting feed, farmers need to take into consideration the characteristics of various water types and feeding habits. Because the routine of shrimps as well as crabs is to find food near the bottom, and after that eat the food gradually, so the food must not be also difficult as well as not quickly soluble in water.
For https://pelletsmachinemaker.com , extruded debris by floating feed machine is the very best selection due to the fact that it is soft and also hard to liquify in water, as well as it is convenient for shrimp and crab to eat, decreasing feed waste as well as decreasing water pollution.
Especially in extensive shrimp farming, squeezed out feed should be dominant, because it is simpler for shrimp to digest protein from extruded feed, which minimizes feed waste as well as promotes far better healthy protein absorption.
At the same time, we can likewise enhance the absorption rate of the feed by adding beneficial microbes or stimulating digestive products to the feed.
However, from a lasting perspective, the use of extruded feed, which is made by floating feed machine will certainly boost the price, and also if the fish use squeezed out feed in the fully grown period, it might cause fish fat, huge tummy, poor stress ability, not ideal for long-distance transport, etc, causing an affordable price at the time of sale.
Therefore, in the process of tank farming, when numerous farmers make use of feed, they usually make use of a combination of pellet feed and extruded feed, which not just controls water high quality, minimizes feed residues, but likewise enhances efficiency and financial advantages.
At the same time, the aquaculture sector is advertising the further growth of the two feeds as a result of their particular benefits.
4. Installation of floating feed machine.
( 1) Installment of floating feed machine pipeline rack
The selection of the setup setting of the pipeline shelf relies on the site location, but it needs to not be as well much from the major engine. Far from the primary engine will cause waste of materials throughout pipeline link on the one hand, and also cause the hysteresis of the control system on the other hand.
If the installation area on site allows, the most effective placement of the pipeline rack is to be straight behind the main engine and also conditioner, parallel to the main engine, and about 1 meter far from the primary engine (there is a specific upkeep space), while guaranteeing that the pipe rack is readjusted upwards. The setting of the vapor line interface of the conditioner is on the side of the conditioner.
In order to promote the cleansing of the ground and the outflow of drainage in the future, the pipeline rack need to be raised by about 10 centimeters throughout installment. In the installment of each shutoff in the pipeline, the setting of the shutoff wheel should fulfill the requirements of practical operation for floating feed machine.
( 2) Setup of floating feed machine control box
In order to facilitate the operation, the installation setting of the on-site control box should be picked near the bypass, and a certain room must be scheduled between the bypass and the control box to momentarily place the wastes streaming from the bypass.
The distance between the frequency converter of the reducing electric motor as well as the rotating positioner of the on-site cutter should not be also much. It is controlled by voltage. If the range is as well far, it will create voltage variations and also impact the cutting result.
The circulating temperature display tool on the on-site control box is to show the temperature level of each end of the blowing cavity in real time, as well as the displayed temperature level series has particular needs. Area 2 Expansion cavity ... till the product discharge development cavity, this sequence needs to be paid attention to when circuitry the electrical control.
On top of that, there are 4 nozzles on the water inlet pipeline of the dual-shaft differential conditioner of floating feed machine. They manage the opening of each nozzle through the electromagnetic cut-off shutoff.
The floating feed machine conditioner inlet nozzle changes 1 to 4 on the control box represent the conditioners The first nozzle to the fourth nozzle from the feed end.
