GKD6030, GKD3004, GKD4004 & GKD6004 Carbide Grooving Inserts: Specifications, Compatibility & Applic
Author : Surya makeyoueasy | Published On : 20 Nov 2026

Introduction
GESAC GKD carbide grooving inserts are designed for turning, grooving and profiling operations in CNC machining. The GKD range includes different cutting widths, corner radii, and insert geometries to suit various machining requirements. Understanding the differences between GKD6030-MR, GKD3004-MT, GKD4004-MT and GKD6004-MT helps machinists select the correct insert for groove dimensions, workpiece material and compatible toolholders.
What Are GKD Carbide Grooving Inserts?
GKD inserts belong to the GESAC GK series of double-edge parting and grooving tools. The series includes two main geometries:
-
MT (Medium Turning): Designed for medium turning and grooving operations. Its olive-shaped chipbreaker and stepped chip-breaking features support chip control at different cutting depths.
-
MR (Medium Profiling): Designed for medium profiling operations. Its snowflake-shaped geometry helps control chips during profiling.
Both geometries use a guide-rail locating slot to support insert positioning and machining stability.
Specifications of GKD6030, GKD3004, GKD4004 and GKD6004
The following dimensions are listed in the GESAC turning tools catalogue.
Dimensions are in millimetres. CW identifies cutting width, and RE identifies corner radius. W1 and S are catalogue dimension references; check the manufacturer’s insert drawing for their exact dimensional locations.
Key Differences Between the Four Inserts
GKD3004-MT: Has a 3 mm cutting width and 0.4 mm corner radius. It is suitable for narrower medium-grooving and turning operations.
GKD4004-MT: Provides a 4 mm cutting width with a 0.4 mm corner radius. It is useful when a wider groove is required.
GKD6004-MT: Provides a 6 mm cutting width and 0.4 mm corner radius for wider grooving and medium-turning operations.
GKD6030-MR: Also has a 6 mm cutting width, but its 3 mm corner radius and MR profiling geometry make it different from the GKD6004-MT. It is intended for medium profiling rather than being a direct substitute for the MT insert.
Carbide Grades and Material Compatibility
The GESAC GK series offers several carbide grades for machining steel, stainless steel, cast iron and other materials.
The catalogue lists different grade options for MT and MR geometries. Not every grade is listed for every insert designation.
Choose the grade according to the workpiece material, hardness, cutting speed, machining stability and manufacturer’s application recommendations. Do not assume that the same grade will deliver identical results across all materials.
Toolholder Compatibility
Correct toolholder selection is essential for insert positioning, cutting stability and dimensional accuracy. The GESAC GK system provides different holder families for external, internal and face grooving.
The GESAC catalogue also lists external GKER/L and internal GKIR/L holders for GKD30, GKD40 and GKD60 insert families.
Examples include:
-
GKD3004-MT: Match with a compatible GKD30 holder.
-
GKD4004-MT: Match with a compatible GKD40 holder.
-
GKD6004-MT: Match with a compatible GKD60 holder.
-
GKD6030-MR: Check the GKD60 seat and MR geometry compatibility before installation.
Always verify the insert seat, cutting width, clamping screw, holder orientation and machining clearance. Matching the nominal cutting width alone does not guarantee compatibility.
Applications of GKD Carbide Grooving Inserts
When used with the correct GK toolholder and carbide grade, the GKD series supports several CNC machining operations.
1. External Grooving
Machining circumferential grooves on the outside diameter of shafts, bushes and cylindrical components.
2. Internal Grooving
Producing grooves inside compatible bores using the appropriate internal grooving holder.
3. Face Grooving
Machining grooves on the face of components using dedicated face-grooving holders.
4. Medium Turning
Using MT geometry for suitable turning operations alongside grooving, depending on the toolholder and cutting setup.
5. Medium Profiling
Using MR geometry to machine profiles and curved transitions that require a larger corner radius.
How to Select the Right GKD Insert
1. Identify the Required Groove Width
Choose the cutting width according to the drawing. GKD3004, GKD4004 and GKD6004 provide nominal widths of 3, 4 and 6 mm, respectively.
2. Check the Corner Radius
A 0.4 mm radius and a 3.0 mm radius produce different groove and profile geometries. Select the radius that matches the component drawing.
3. Select MT or MR Geometry
Choose MT for medium turning and grooving requirements. Choose MR for medium profiling applications.
4. Match the Carbide Grade
Check the manufacturer’s grade recommendations for steel, stainless steel or cast iron.
5. Verify the Toolholder
Confirm that the selected GKE, GKI, GKF or GKFP holder accepts the exact insert geometry and size.
Common Machining Problems and Practical Checks
Why Choose the Right GKD Grooving Insert?
Selecting the correct insert helps machining professionals achieve accurate groove dimensions, controlled chip formation and consistent machining results. MakeYouEasy helps users explore CNC cutting inserts, toolholders and machining accessories for different manufacturing requirements. Confirm the complete insert designation and holder compatibility before ordering.
Conclusion
GKD3004-MT, GKD4004-MT and GKD6004-MT provide different cutting widths for medium turning and grooving operations. GKD6030-MR offers a different geometry for medium profiling, with a 6 mm cutting width and 3 mm corner radius.
By checking the cutting width, corner radius, carbide grade, geometry and holder compatibility, machinists can select the appropriate GKD insert for their CNC machining requirements.
Explore CNC grooving inserts and machining accessories at MakeYouEasy.com.
FAQs
1. What are GKD carbide grooving inserts used for?
They are used for compatible external grooving, internal grooving, face grooving, turning and profiling operations.
2. What is the difference between GKD3004-MT and GKD4004-MT?
GKD3004-MT has a 3 mm cutting width, while GKD4004-MT has a 4 mm cutting width. Both have a 0.4 mm corner radius.
3. What is the difference between GKD6004-MT and GKD6030-MR?
Both have a 6 mm cutting width, but GKD6004-MT has a 0.4 mm corner radius and MT geometry, while GKD6030-MR has a 3 mm corner radius and MR profiling geometry.
4. Which toolholders are compatible with GKD inserts?
The GK system includes GKE external, GKI internal, and GKF and GKFP face-grooving holder families. Exact insert-seat compatibility must be checked.
5. Which materials can GKD carbide inserts machine?
The GK series offers grade options for steel, stainless steel and cast iron. Select the grade according to the manufacturer’s material recommendations.
Popular Search Keywords
GKD carbide grooving inserts, GKD3004-MT insert, GKD4004-MT insert, GKD6004-MT insert, GKD6030-MR insert, GESAC GKD inserts, carbide grooving inserts, CNC grooving tools, medium turning inserts, medium profiling inserts, external grooving inserts, internal grooving toolholders, face grooving inserts



