A Smoother Base for the Final Floor

To install a floor screed over a sub-floor to create a smooth, even floor surface for the finish to be applied to. This also ensures that the correct falls are in place and that water flows down where it is meant to go in bathrooms, laundries and kitchens. One thing you will not see when the tiles are installed is screeding, but the floor's appearance and performance for years to come is determined by it.

Here are some indicators that a person may need to look into their floor

Old finishes are removed from floors in renovations, and the resulting patches, dips, movements, damage to the surface and changes in level may become evident in the floor. These problems should be addressed before the tiles are installed and can manifest themselves as misaligned tiles, uneven grout, lack of drainage or early failure of the tile. However, not all floors require screeding. This is dependent on the previous floor, the level and what will be installed on top of it, and always includes an assessment.

The difference between Levelling and Screeding

The aim of floor leveling is to create a flat, even floor. One of the routes to reach there is screeding. Your method of approach will vary according to the floor, room and tile chosen. For example, large format tiles require very precise levelling to fit.

How Screeding for Tiling Works With the Rest of Your Renovation

Where It Sits in the Schedule

Renovation works are conducted in order. Plumbing is first, followed by floor preparation, then wet areas waterproofed and then tiles. Screeding is a part of the preparation stage, and should be planned from the outset. It is best to wait until tile day.

What Our Preparation Includes

All work is preceded by a surface check. Thereafter, the work could consist of:

• Playing with the soil to see how it moves, flows and retains water

• Assessing and implementing existing finishes or changes to finishes

• Preparing base for screeding or tiling

• The correct setting of room levels and falls.

• Preparing wet areas for tile installation prior to laying the tile.

• Inspecting the evenness in progress

This is clearly stated in the written quote, letting you know what and why.

Why Melbourne Homeowners Choose Ali Star Tiling

Experience and Accountability

Ali Star Tiling is a business that's been in operation since 2009, and they've completed more than 200 projects, both residential, commercial and renovation. There is one team that does preparation, screeding, waterproofing and tiling services throughout without subcontractors. Our waterproofing to wet areas complies to AS 3740 and Victorian Building Authority requirements and we use reputable suppliers of our adhesives, grouts and membranes.

What You Receive

After the work is done, you will receive a written estimate, layout planning and a walk-through for free! We also provide a warranty of 7 years!

Where We Work

We are located in the western suburbs of Melbourne and service Werribee, Point Cook, Truganina, Sunshine, Sunbury, Gisborne, Kurunjang and Bacchus Marsh and the rest of regional Victoria and Melbourne.

Frequently Asked Questions

Is it necessary to have all floors screeded before tiling?

No. Your floor is our first inspection point and only things that are recommended to it are provided.

Is it possible to use screed on a bathroom floor?

Yes, wet areas should be waterproofed prior to tiling.

Thinking about renovating the bathroom, kitchen, laundry or whole bathroom suite? Talk to Ali Star Tiling before ordering tiling, and have us examine the floor before tiling.