Floating fish feed extruder machine installment guidelines

Author : Townsend Albertsen | Published On : 10 Mar 2026

Currently, with the continuous advancement of the aquaculture industry, the use of marine floating fish feed extruder machines is ending up being increasingly more substantial, and also there are an increasing number of projects for installing and using water floating fish feed extruders.

Amongst these numerous producers utilizing aquatic floating fish feed extruder machines, because of the use of producers Various manufacturing managers or engineering installment designers have different understandings of the manufacturing characteristics of water fish feed pellet extruders.

The installation techniques of the floating fish feed making machines and also their sustaining facilities are also various, and also the selection of setup methods for each part of the floating feed extruder machine and also its sustaining facilities will directly influence the stability of the floating fish feed extruder machine's working efficiency and also the humanization of the floating fish feed extruder's operation.

The water floating fish feed extruder machine described in this article describes a typical fully automatic control feed extruder, which includes a broken arch feeding bin, a feeder, a dual-shaft differential conditioner, an feed pellet extruder, a pipeline shelf, and also an electronic control system.

In this paper, some pointers are given for your referral from the perspective of the option of the setup technique of each part of this type of floating fish feed extruder machine as well as its sustaining centers.

1. Setup of damaged arch feeding container and feeder
A basic reference data in the floating fish feed extruder machine control system is the flow price of the material. The amount of water, vapor as well as various other fluids included the system is based on the circulation rate of the product, so the stability of the product circulation straight impacts the stability of the entire floating fish feed extruder machine production.

In order to guarantee the stability of the logistics, the system takes on differential weight feeding, that is, the whole feeding container as well as the feeder are placed on the tons cell, and a closed-loop control is developed between the load cell, the regularity conversion feeder and also the computer system. feeding.

The basic need of differential weight feeding is the soft link of the upper as well as reduced interfaces, that is, the soft connection in between the broken arc feeding container and the pneumatically-driven gateway on the top part of the bin body, and also the soft connection between the feeder outlet as well as the conditioner inlet. The soft connection of these 2 areas generally uses canvas as the product to link.

The installation of lots cells is an additional crucial factor affecting feeding. There are typically 2 types of sensing unit installation: hoisting and also supporting, both of which can be used according to the requirements of the site.

When using hoisting, some measures should be taken to make certain the stability of the silo body. During the manufacturing process of the floating fish feed extruder machine, when the material is fed right into the feeding container, the dropping of the material causes the whole bin body to shake.

The amplitude of the shaking as well as the length of the trembling time are very closely pertaining to the size of the sensing unit pole. The feeding data of time follows the data prior to feeding, however after the material gets in the silo, if the silo body keeps drinking, it will straight impact the considering precision of the sensor, so it is required to include a limitation device at the reduced part of the silo body as well as meet the limit little bit gadget does not influence considering.

An additional floating fish feed extruder machine installment technique is brace installment. This installment method will not trigger shaking, yet the whole silo body is very easy to relocate.

This needs that the sensing unit needs to be fixed on the brace during floating fish feed extruder machine installment, and also the sensor needs to be mounted on both sides of each lifting ear of the feeding silo. Install the limit block to prevent the motion of the entire storage facility body.

During the setup of the broken arc feeding container, it is required to focus on the position of the assessment door for floating fish feed extruder machine. To ensure that the inspection door can be opened up, an assessment platform needs to be installed at the reduced part of the evaluation door.

2. Setup of dual shaft differential conditioner

Because the support frame of the dual-shaft differential conditioner is a bonded body, there will be a specific contortion during the transportation of the floating fish feed extruder machine

When the brace is warped as well as mounted directly without modification, the main shaft of the conditioner as well as the result shaft of the transmission will certainly be damaged.

Different shafts, the noise created by the roller chain coupling when the floating fish feed extruder machine is running will certainly cause the combining gear as well as chain to wear, so the assistance frame should be adjusted throughout installation to ensure that the conditioner major shaft as well as the transmission outcome shaft are coaxial.

The family member position of the two primary shafts is likewise required when the floating fish feed extruder machine conditioner is set up. During floating fish pellet machine installation, it can be set up according to the mark on the shaft end, or you can choose the family member placement for installment. For details, please describe the guidebook.

3. Installation of floating fish feed extruder machine
The main machine of the floating fish feed extruder machine is the heaviest devices in the whole system, as well as due to the aspect of the main electric motor, it has high demands on the bearing capacity of the structure.


During installment, the floating feed extruder machine can not be positioned directly on the structure. Channel steel (the kind of channel steel is determined according to the degree of the floating fish feed extruder machine) must be utilized to make a structure pad under the tools base according to the size of the extrusion machine base, and fix it with the structure with expansion screws.
When making the base structure, the flatness of the whole structure should be guaranteed, and also unique attention needs to be paid to the same airplane of the main framework and also the electric motor base. pellet machine in Belarus is specifically vital for the extrusion design that utilizes a flexible combining straight attached to the reducer.

For an floating fish feed extruder machine driven by a flexible combining directly linked to a decrease box, the coaxiality in between the result shaft of the major motor as well as the input shaft of the reduction box must be ensured during setup.

For the floating fish feed extruder machine driven by the sheave, the driving sheave and the driven wheel must get on the exact same aircraft throughout installment. At the same time, there are likewise requirements for the rigidity of the V-belt. If it is as well loose, it is simple to slip.

The life span of the V-belt is to readjust the stress bolt on the electric motor base to make the stress of the V-belt in an ideal state, that is, use a force of 27kg to the axis of the straight side of the belt, and make its deflection countered as 21mm is appropriate.


4. In-depth description of floating fish feed extruder machine.

Marine feed has 2 production techniques: pellet feed and extruded feed. As a result of the excellent absorption rate of extruded aquatic feed and also high fish return, the aquatic market is quickly transitioning from pellet feed to aquatic extruded feed.

The extruded fish feed is an extruded porous feed obtained after the high temperature and also high pressure of the floating fish feed extruder machine and the abrupt depressurization.

Both extruded feed and pelleted feed can be made use of as feed for fish. The extruded feed is much better due to its great palatability and high digestibility. The extruded feed is generated by the process of conditioning, blowing and also fluid spraying:

In the process of feed conditioning, the production process of extruded feed is to add water as well as vapor with each other to completely get in touch with the material. After conditioning, the level of protein maturity is enhanced by 30%, and the dampness material is about 25%. The reason why the extruded material can improve its digestion application.

① Primarily because the processing innovation requires the raw materials to be crushed a lot more finely, and the heat of the floating fish feed extruder machine process increases the level of starch ripening, which contributes to the food digestion and absorption of feed by fish;
② Secondly, the stability of the extruded material in water for 12-36 hrs, It is convenient to visually examine the feeding scenario of the fish and minimize water contamination;
③ Third, the immediate strong massaging of high temperature as well as high moisture throughout the floating fish feed extruder machine blowing process can kill some damaging microorganisms in the raw materials.