Fish feed floating pellet making machine available
Author : Cabrera Goldberg | Published On : 03 Apr 2026
The major feature of the fish feed floating pellet making machine is to directly extrude puffed food. Normally, cereals, potatoes or beans are utilized as the major basic materials.After being extruded by thefloating fish feed making machine, under the problems of high temperature as well as high pressure, the item is blown by using the stress difference inside and also outside the machine
The direct extrusion type puffed food usually does not have lead, as well as currently the fish feed floating pellet making machine is widely utilized in the food market. So how much do you know about the floating fish feed extruder? The fish feed floating pellet making machine has a pair of screws and also a screw sleeve, which have the features of mixing and kneading.
After the raw product goes into the extruding dental caries, the product undergoes extrusion, rubbing and also shearing in between the screw sleeves, as well as the internal pressure remains to rise, up to 4Mpa, and also the temperature remains to increase, as much as 140 ℃.
Within 3-7s, the temperature level and pressure of fish feed floating pellet making machine surge dramatically, and also the tissue framework of the product adjustments, which further gelatinizes the starch, denatures the protein, damages the crude fiber, as well as eliminates harmful bacteria such as Salmonella.
The high-temperature as well as high-pressure material comes out of the discharge port, as well as its pressure is instantly launched in an instant, and also the wetness is partly flashed.
1. The framework of floating pellet making machine.
The feeder is to make certain consistent and also stable feeding, as well as readjust the feeding amount according to the ranked current value of the motor of fish feed floating pellet making machine. Generally, an electro-magnetic speed-regulating electric motor or a frequency converter is used to change the speed, as well as the feeding quantity of the feeder is altered.
Growth tooth cavity of fish feed floating pellet making machine is made up of screw, screw sleeve, layout, card bone and so on. The screw and screw sleeve are combined in areas, the compression level can be changed according to the type and also needs of the extruded feed, and also the extruded level of the extruded feed can be changed;
The fish feed floating pellet making machine is separated right into three areas in terms of collapse level according to operate and also place:
① Feeding section: This section of floating fish feed machine has a large screw pitch, and mostly conveys as well as compresses the product so that the material fills the spiral groove;
② Compression section: The screw groove of this section adjustments from deep to superficial along the material moving direction to press the product;
③ Extrusion section: the screw groove is shallower, the pitch gradually lessens, the extrusion force can reach 3.0-10Mpa, and the temperature can get to 120-150 degrees Celsius. This section has the highest pressure and highest temperature level, so the wear of the screw and screw sleeve is also one of the most major.
The outlet of the extrusion section is a theme, the shape of the layout is created with various die openings according to the requirements of different feeds, the product is extruded from the die hole of the template and enters the ambience, the stress and temperature decrease dramatically, as well as its volume expands rapidly, the water quickly vaporizes, dries out and also solidifies to become an extruded material.
2. Operating procedures of floating fish feed machine
( 1) Precautions prior to starting and also after stopping
① Check all parts of fish feed floating pellet making machine, especially the linking screws as well as support screws of each area of the puffing chamber, the connecting bolts in between the motor base and also the structure, as well as the screw link between the puffing chamber and also the frame, as well as there should be no looseness;
② Manually rotate the primary shaft, at this time, there must be no massaging audio in the fish feed floating pellet making machine puffing dental caries;
③ Beginning the feeding auger of fish feed floating pellet making machine, inspect its stepless high-speed performance, and call for normal operation;
④ Examine as well as clean the water as well as gas paths prior to starting the fish feed floating pellet making machine, and all filters need to be cleaned;
⑤ Before starting the fish feed floating pellet making machine, check whether the circuitry of the electric control component is correct, whether the turning of each electric motor is proper, and whether the control is reputable;
⑥ After the fish feed floating pellet making machine is quit, you need to use high-temperature gloves, promptly remove the discharge mold, and immediately clean it while it is hot, as well as start the primary electric motor to clear the material built up in the puffing tooth cavity. When the corn is blown, soybean powder need to be included The material is rinsed tidy;
⑦ Take notice of safety and security when discharging the machine, as well as do not stand in front of the machine to prevent risk caused by recurring pressure in the fish feed floating pellet making machine tooth cavity;
⑧ After the fish feed floating pellet making machine is running usually, it will not be shut down at will.
( 2) Power on
① Before starting the fish feed floating pellet making machine, inspect the fasteners, and also there must be no looseness;
② Make sure the normal supply of steam and water;
③ Make certain that the power supply as well as electric home appliances are typical;
④ Open the steam valve, preheat the floating fish pellet machine blowing chamber, the temperature level is about 100 levels;
⑤ Beginning the fish feed floating pellet making machine: start the conditioner, begin the feeding auger, when there is product flowing out from the electrical outlet of the conditioner, begin adding steam to the conditioner.
A percentage of water is included, as well as the product is fed into the puffing tooth cavity at the same time. After the material is extruded by fish feed floating pellet making machine, the puffing impact and dampness of the product are readjusted.
( 3) Downtime
After the fish feed floating pellet making machine manufacturing comes to an end, it requires to be quit. The quit sequence is: feeding auger as well as conditioner. After that wait until the shown value of the major engine present on the electrical control closet becomes the no-load present value, after that quit the main electric motor and also the oil pump motor.
( When the corn is blown, regarding 25 kg of soybeans must be fed right into the bypass feeding port of the very first area of the puffing tooth cavity. To cleanse the residual corn material in the puffing tooth cavity, and after that stop the major electric motor to avoid the fish feed floating pellet making machine from blocking), after that quickly take apart the puffing dental caries of the tail area for cleansing.
After cleaning, apply grease to the internal wall of the major shaft and also screw head (After feeding grease), re-install it and also wait on the following boot;
When you see that the material level indication on the silo suggests that the product degree has reached the lowest level, begin to prepare for shutdown. At this time, do not stop the feeding auger and conditioner, and stop feeding when the primary fish feed floating pellet making machine current drops to the no-load present auger as well as conditioner.
3. Procedure series of floating fish feed machine
( 1 )When puffing soybeans, the two areas at the inlet end of the blowing tooth cavity are single screw heads, and also the three areas at the electrical outlet end are furnished with double screw heads.
Initially, add steam to the jacket to pre-heat the puffing cavity to regarding 100 degrees, and also placed the screws on the blowing dental caries at the tail section. After pellet machine in Sri Lanka is tightened up, loosen it for 3-4 turns, and after that tighten up the screw plug to deal with the screw plug before feeding.
By controlling the stepless high-speed device of the feeding auger, the feeding speed is from slow to fast, and the feeding speed is from small to big. After the soybean meal is ejected from the screw plug hole, include the cover to get in the typical manufacturing, and also configure the screw connects with various apertures to obtain soybean meal with different returns and finenesses.
By setting up the cone-shaped pressure rings of various sizes, the suggested temperature of the four-section (discharge end) puffing cavity is 130-140 degrees. It is advised that the screen of the crusher made use of for squashing soybeans need to have a diameter of 3-4.
( 2 )When extruding fine-grained feed by fish feed floating pellet making machine, the extruding screws in the extruding dental caries are all single screw heads, add vapor to the coat to preheat the puffing tooth cavity to regarding 80 degrees, and get in the fish feed floating pellet making machine and steam consistently appeased and solidified powder.
Concerning 18%, this must be performed in the feed conditioner, and the feed quantity is controlled by the stepless rate regulating mechanism from tiny to large. Note that the reading of the ammeter of the main motor ought to not surpass the rated current of the major engine of fish feed floating pellet making machine
Be careful of overwhelming the motor and also extruding grainy materials. When the temperature level of the extruding chamber at the discharge end is managed to a suitable degree by setting up conelike stress rings with different sizes.
4. Repair work of fish feed floating pellet making machine.
Transform the fish feed floating pellet making machine on-site control button to the quit state during maintenance;
The within and outside of the fish feed floating pellet making machine should be cleaned up after each shift, particularly the product ought to not be kept in the puffing chamber, so regarding avoid it being tough to tidy up after cooling and heap;
The huge wheel of the major shaft of the puffing chamber must be cleansed regularly, and not excessive dust, or else the wheel will certainly be unbalanced and the puffing chamber will vibrate;
The primary bearing of the growth chamber is lubricated with lubricating oil, and also the bearing of the fish feed floating pellet making machine conditioner as well as its transmission tool and also various other bearing parts are lubed with grease;
The major bearing has to be replaced with brand-new oil regularly. After 250 hours of work, all new oil has to be changed;
Other bearing parts, every 48 hours of job, oil is infused when;
The chain transmission device on the steam conditioner must be oiled regularly;
The oil in the reducer of fish feed floating pellet making machine must be managed at the calibrated oil degree, and also the new oil needs to be changed after 250 hours of procedure;
When removing the screw head, do not knock it hard;
Always maintain the fish feed floating pellet making machine and its environments clean.
The above is the concept, framework and operating procedures of the fish feed floating pellet making machine presented by Richi Machinery. In quest of crispy taste and great appearance, suppliers frequently include a raising agent (or baking powder), which has a particular quantity of light weight aluminum elements, and generates gas when warmed throughout baking or frying, and also the raising representative is inside the food
