Cause of Poultry Feed Pellet Making Machine Clog

Author : Goff McKnight | Published On : 27 Feb 2026

In the process of substance feed production, the risk-free and typical production of the poultry feed pellet making machine is very crucial, due to the fact that the poultry feed pelletizer totally completes the preparation of the poultry feed pellet making machine. However in real manufacturing, due to various reasons, it is easy to form a thick and hard product between the ring die and journalism roller. The stress roller can not extrude the product from the die opening, so that the ring die of the poultry machine is stuck or slipped, causing the usual blockage of the poultry pellet mill.

Via on-site evaluation of multi-equipment and also multi-material, the factors for machine blockage are as complies with:

1. The die roll void is not ideal.
The gap in between the die rolls is also huge, resulting in an exceedingly thick material layer between the die rolls, irregular distribution, irregular pressure roll stress and anxiety, as well as very easy slippage. When the extrusion force of the die roller on the product is less than the resistance of the internal wall surface of the die opening to the material, the material can not be extruded, which will certainly trigger clog. In order to reduce blocking, attention should be paid to readjusting the space in between the die rolls during production.


When adjusting, it is best to form a state of distance, rotation as well as non-rotation of the stress roller and the ring die. According to monitoring, the void is normally 3-5mm. In this procedure, the experience as well as adjustment sensation of the poultry feed pellet making machine are extremely crucial.


2. The result of vapor.
The most excellent manufacturing conditions in the production procedure of pellet feed are suitable raw material water, excellent vapor quality and also sufficient conditioning time. Correct use completely dry saturated steam granules can effectively boost the result of the poultry feed pellet granulator and also the top quality of the granulated product. In order to ensure great bit top quality and high outcome, in addition to the normal operation of each transmission part of the poultry feed machine, the quality of dry saturated vapor entering the conditioner of the poultry feed pellet making machine must likewise be assured.

this hyperlink saturated heavy steam has conditioning as well as lubricating result in the granulation procedure, which can enhance performance, minimize frictional heat, as well as extend the service life of ring die; it can reduce power intake and promote starch gelation. Fiber-to-fiber bonding; it can boost the particle developing price, minimize powder, make the product look smooth as well as tidy, and improve product competitiveness.

The low quality of the steam makes the wetness of the product too expensive when it leaves the conditioner, as well as when it goes into the fragment tooth cavity, it is easy to trigger blockage of the die hole, and the pressure roller slips, triggering obstruction.

Particularly:
① Inadequate vapor pressure and also high water web content can quickly create the product to absorb too much water. At the same time, when the pressure is reduced, the temperature level of the product is additionally low throughout conditioning, the starch can not be gelatinized well, as well as the granulation result is poor;
② The heavy steam stress is unsteady, rising and fall low and high, and also the product conditioning is unstable, leading to big variations in the current of the poultry feed making machine, unequal thirst of the product, as well as very easy obstruction in the typical production procedure.

The poultry feed pellet making machine must always take note of aspects such as heavy steam pressure, conditioner feed price, etc, to avoid too much moisture in material conditioning brought on by vapor pressure and water web content. At the same time, in order to decrease the variety of blockages brought on by vapor top quality, the boiler room must offer high-grade, secure dry saturated vapor. In the manufacturing process, the poultry feed granulator ought to constantly take note of the moisture content of the quenched and solidified material, which can be judged by an easy approach. The certain approach is: get hold of the product of the conditioner, hold it by hand, and release it.

3. The influence of conditioning result.
In order to make pellet feed fulfill the affordable needs of the market, its exceptional top quality needs to be assured. The conditioning impact of the product before granulation is really crucial, due to the fact that it directly affects the output and also quality of the poultry feed pellet making machine, specifically the water stability of special marine items is an important indicator.

If the material can not be entirely conditioned and matured before granulation, it is difficult to guarantee the water security index. The so-called conditioning describes the pretreatment of powder products prior to granulation, which is the procedure of completely stirring and soaking up the powder to be granulated and also a proper quantity of vapor in the conditioner.

Select the conditioning equipment that meets the technological requirements, to ensure that the material can be totally stirred and blended with heavy steam in the conditioner to accomplish the result of softening the product as well as gelatinizing starch, which is conducive to the compression molding of powder as well as produces qualified items.

The poultry feed pellet making machine conditioner requires an extended period of warmth conservation, home heating and also humidification, and also the variety of layers can be set up in any kind of mix as required to guarantee that the material can fully fulfill the demands of conditioning, enhance the surface and also internal top quality of the granular material, and also boost its water resistance in water. At present, the most ideal conditioning impact can be achieved by using the approach of Modulator+Qualifier+Modulator.

Via on-site debugging, the variety of clogs of the poultry feed pellet making machine can be decreased by readjusting the steam. As the central heating boiler devices has actually been formed, the heavy steam offered has actually been established. Take notice of the therapy method of water vapor in the steam pipe, try to exclude the condensed water in the vapor pipeline, and also the steam stress at the front end of the conditioner need to be really secure.