Cause of Poultry Feed Pellet Making Machine Clog

Author : Horne Ottesen | Published On : 17 Apr 2026

In the process of compound feed production, the secure and also typical production of the poultry feed pellet making machine is really essential, because the poultry feed pelletizer totally finishes the preparation of the poultry feed pellet making machine. But in real manufacturing, as a result of various reasons, it is simple to create a thick as well as tough material between the ring die and journalism roller. The pressure roller can not squeeze out the material from the die opening, so that the ring die of the poultry machine is stuck or slipped, causing the typical clog of the poultry pellet mill.


Through on-site analysis of multi-equipment and multi-material, the factors for machine obstruction are as adheres to:

1. The die roll space is not ideal.
The void in between the die rolls is as well huge, leading to an excessively thick material layer in between the die rolls, uneven circulation, unequal stress roll anxiety, and easy slippage. As soon as the extrusion pressure of the die roller on the product is less than the resistance of the internal wall of the die opening to the product, the product can not be extruded, which will certainly trigger obstruction. In order to minimize obstructing, attention should be paid to adjusting the gap between the die rolls throughout manufacturing.

When changing, it is best to develop a state of distance, turning and non-rotation of the pressure roller and also the ring die. According to monitoring, the void is normally 3-5mm. In this procedure, the experience as well as adjustment feeling of the poultry feed pellet making machine are extremely vital.


2. pellet machine in Egypt of steam.
One of the most perfect manufacturing problems in the production process of pellet feed are suitable resources water, good steam high quality and also sufficient conditioning time. Appropriate use of dry saturated steam granules can successfully improve the result of the poultry feed pellet granulator and the top quality of the granulated product. In order to ensure great fragment high quality and also high outcome, in addition to the typical procedure of each transmission part of the poultry feed machine, the top quality of dry saturated steam going into the conditioner of the poultry feed pellet making machine ought to likewise be ensured.

pellet machine in Suriname has conditioning as well as lubricating effect in the granulation procedure, which can improve performance, minimize frictional heat, and lengthen the life span of ring die; it can reduce power intake and promote starch gelation. Fiber-to-fiber bonding; it can improve the fragment creating price, reduce powder, make the product appearance smooth as well as clean, and also boost item competitiveness.

The poor quality of the steam makes the moisture of the product expensive when it leaves the conditioner, as well as when it enters the fragment cavity, it is simple to trigger clog of the die hole, and the stress roller slides, causing obstruction.

Particularly:
① Insufficient vapor stress and also high water web content can quickly cause the material to soak up too much water. At the same time, when the pressure is low, the temperature level of the product is additionally low throughout conditioning, the starch can not be gelatinized well, and the granulation effect is poor;
② The steam stress is unpredictable, fluctuating high and low, as well as the product conditioning is unpredictable, leading to huge changes in the current of the poultry feed making machine, uneven thirst of the product, as well as very easy blockage in the typical production process.

The poultry feed pellet making machine should always pay attention to variables such as vapor stress, conditioner feed rate, and so on, to prevent excessive moisture in material conditioning triggered by heavy steam pressure and water material. At the same time, in order to reduce the number of clogs caused by steam high quality, the boiler room need to supply top quality, steady completely dry saturated vapor. In the production process, the poultry feed granulator ought to constantly take note of the wetness material of the appeased and also toughened up product, which can be judged by an easy approach. biomass pellet machine in Trinidad and Tobago is: grab the product of the conditioner, hold it by hand, as well as release it.

3. The influence of conditioning effect.
In order to make pellet feed satisfy the affordable demands of the market, its superb high quality has to be assured. The conditioning result of the material before granulation is extremely essential, due to the fact that it straight influences the output as well as top quality of the poultry feed pellet making machine, particularly the water stability of special aquatic items is an important indication.

If the material can not be totally conditioned and also grown before granulation, it is tough to guarantee the water stability index. The supposed conditioning describes the pretreatment of powder materials before granulation, which is the process of completely mixing and soaking up the powder to be granulated and also a proper amount of vapor in the conditioner.

Select the conditioning devices that satisfies the technical needs, to make sure that the product can be totally stirred and also combined with vapor in the conditioner to accomplish the result of softening the material and gelatinizing starch, which contributes to the compression molding of powder as well as creates qualified products.

The poultry feed pellet making machine conditioner calls for a long period of heat preservation, heating and humidification, as well as the variety of layers can be set up in any combination as required to make certain that the product can fully satisfy the demands of conditioning, improve the surface area and interior high quality of the granular material, and also improve its water resistance in water. Currently, the most suitable conditioning result can be attained by using the method of Modulator+Qualifier+Modulator.

Through on-site debugging, the variety of blockages of the poultry feed pellet making machine can be decreased by adjusting the vapor. As the central heating boiler equipment has actually been formed, the steam offered has actually been established. Pay attention to the treatment method of water vapor in the steam pipe, try to exclude the condensed water in the vapor pipeline, and also the vapor stress at the front end of the conditioner ought to be extremely steady.