The Unspoken Secrets Of Repairs To Upvc Doors

Author : Dreyer Trevino | Published On : 20 Jan 2025

Repairs to uPVC Doors

Upvc doors are extremely durable, weather proof and easy to look after. Double glazing is also available, which can help to reduce energy consumption while making your home or office more comfortable.

Small problems with upvc may be more costly and serious when ignored. It is therefore essential to carry out regular maintenance.

Surface Damage

It is possible that you require professional assistance to repair your uPVC door. It could vary from minor scuffs or scratches to more serious damage that affects the functionality of your door. A reputable trader can provide quick and efficient repairs to bring your door back to its original condition. If the damage to your uPVC is more severe it is possible to replace it.

Damage to the surface of uPVC doors can occur due to a variety of factors, such as wear and tear, accidental damage or environmental influences. Regular cleaning and maintenance will stop dirt and grime from becoming a problem which can cause scuffs or scratches. Utilizing non-abrasive cleaning products can aid in protecting the surface from damage.

upvc door dropped chelsea to uPVC doors can be caused by weather that can cause shrinking or fading of the colour and finish. This can impact the appearance of the door, as well as cause drafts and a decrease in energy efficiency. Replace worn-out parts to enhance the appearance and functionality of your uPVC doors, as well reduce energy consumption.


It is crucial to identify the issue prior to starting any repairs. A skilled uPVC specialist will be able to assess the damage and recommend the best solution. They can repair chips, cracks, and surface dents, as well as re-colouring the affected area.

Foreman Snags utilize a variety of specially-designed filling and bonding agents that are designed specifically for UPVC surfaces. These can be used to fill cracks, chips and deeper scratches. They are available in a wide selection of colours to match the existing finishes. Their dedication to detail and knowledge assures a consistent and smooth result.

Regular inspections can help you spot early signs of damage to your uPVC doors and windows so that they can be addressed before they become more serious. Regular cleaning and maintenance will also prolong the lifespan of your uPVC doors.

Misalignment or Sticking

As opposed to wooden doors uPVC doors don't rot over time or warp. They require only minimal maintenance to keep their appearance. This means a clean-up with a damp cloth for removing dirt and grime, along with regular lubrication of the locking mechanism. If you do not address these issues but, it could allow animals or other trespassers to gain access to your home.

Sometimes, the door can become misaligned because of structural shifts or weather changes in your home. This can often be easily fixed by re-aligning the hinges. This could require tightening or loosening the screws on each of the hinges to alter the angle. This is best done by a professional such as a locksmith, since adjusting the wrong way on your uPVC door could exacerbate the issue and cause further damage.

Another common symptom is that the uPVC might stick when you close it. This is due to changes in weather conditions that cause uPVC to expand and contract. However, this issue could also occur due to wear and tear or a build-up debris and dirt on the hinges. In some instances, the lock mechanism might also be stuck and an easy lubrication will solve the problem.

An effective way to determine if your uPVC door is stuck is to see how the multipoint lock works when closed and opened. If it is stiff or difficult to open and close then you might need to realign your door, or even replace the lock mechanism.

Examining regularly your uPVC windows and doors for any issues that need to be addressed is essential. Early intervention can save money by preventing further damage and extending your uPVC door's lifespan. If you find gaps between the uPVC frame and door this could indicate that the frame is damaged and requires replacement. In the event of delay, repairs could result in further deterioration and compromise the insulation or security of your home. A professional can evaluate the issue and fix it to save you money in the long run.

Broken Handles and Levers

A handle or door knob that isn't tightened properly or aligned could become loose over time. It is possible to take off the door handle in its open position, exposing the handle mechanism and locking screw. Then the screw for setting the handle will need to be tightened. It's not too difficult, however it could be risky if you still have the handle attached to the frame. This puts the door in danger of jamming or closing accidentally.

Insufficient lubrication or misalignment, may be the cause of a loose handle or doorknob. This can be remedied by gently lubricating the parts of the handle that are stiff or require more pressure to activate, and then re-aligning the handle. It is best to do this sooner rather than later, as it will stop the internal mechanism from deteriorating and breaking eventually.

Depending on the age of your doors, the mechanisms inside may get worn out over time or simply due to ageing. This could cause the handle become stiff or difficult to lift. This is typically the case with multipoint locks. It can be corrected by relubricating the mechanisms and checking for plumbness or twist in frames, or by adjusting hinges.

When replacing the handle of a uPVC window or door handle, you must ensure that the new handle is the right size. This is accomplished by taking measurements of the keyhole and handle plate with a tape measure, or using this uPVC door handles sizes guide to determine the appropriate size. It is also important to ensure that the new handle is properly fitted and secured, as the lack of security in a the cylinder lock could compromise security.

There are a variety of uPVC handles and the one you choose can affect how easy it is to move them or lift them. The majority of older uPVC doors will feature a doorknob that has set screws visible, whereas newer uPVC doors will have concealed set screw doors that use a decorative faceplate to hide the set screw. The Top Screw Above and Lever Lever models are the most simple to replace. Both are attached using a single screw located on the bottom of the plate.

Failing Double-Glazing

Double glazing is a common feature in modern homes due to its energy efficiency and insulation properties. However double-glazed doors and windows aren't completely secure and can be prone to problems over time, which can affect their performance and cause costly repairs or replacements. Being aware of and fixing these issues can prevent the loss of energy, lower your costs for utilities and improve the security and comfort of your home.

Drafts or moisture around the edges of your door and window frames can indicate that the weatherstripping seal has worn away or become damaged. Replacing the weatherstripping seal can restore your uPVC window's insulation and reduce drafts in your home.

In the event that double-glazing fails, it is a sign that the glass and frame of your window are beginning to lose energy efficiency. This may result in increased energy costs or an uncomfortable living space. Double-glazed windows have two glass panes separated by a gap that is filled with gas that is insulating, which helps to keep your house warm and reduce energy bills. The seal can break and create a draft, or allowing moisture to enter the gap. This can cause damage to your furniture and fabrics.

UPVC windows and doors are durable however, they can discolour and fade in time because of exposure to sunlight and environmental factors. Regular cleaning and a UPVC restoration treatment can help preserve their appearance and prevent fading and discolouration. In some instances, the fade or discolouration is so severe that the window or doors need to be replaced to restore their aesthetics and functionality.

It is important to recognise and address problems with your uPVC doors and windows early to avoid costly repairs and replacements. A stitch in time can save nine and a half years, so don't wait until the issue is too major to fix! Contact your local double glazing experts if you are unsure what to do. They can provide advice on replacement and repair options that will best suit your budget and needs. They can also perform maintenance on your double glazing to prevent future problems.