A Detailed Comparison Between a Reactive Loadbank and a Resistive Loadbank
Author : James Spencer | Published On : 21 Sep 2021
Power is something which runs any production unit and it is extremely important that you find the right loadbank to make sure that you are able to get a constant supply of power at your disposal to run all the machinery in the best possible manner. There are basically two types of loadbanks that you can find and you need to choose the right one as per your requirement of power. Both types of loadbanks have a few similarities and dissimilarities that can make them useful for you.
Here is a look at a few of the points based on which we can compare between the functionalities of a reactive loadbank and a resistive loadbank. So if you are looking to find the right loadbank for your production unit so that you can power it up in the best possible manner, here is a look at a few of the things that you need to know about both the loadbanks and how it can help you in developing a better production unit in the best possible manner.
When it comes to hiring a loadbank for powering a production unit, you need to make sure which one is more appropriate for your unit as per its power consumption. While a reactive loadbank is required for an unit which consumes lesser amount of power to run, a resistive one, which produces more power than that of a reactive loadbank, should be used in an unit where the consumption and the requirement of power is on the higher side. This is a very important factor that you should keep in your mind while comparing between a resistive loadbank and a reactive one.
The cost of installation of a loadbank is always on the higher side and is an expensive matter. However, when you opt for the installation of a reactive loadbank in your production unit, it remains slightly higher than that of the cost of installing a resistive one. So if you have the requirement of installing or hiring a reactive loadbank, then you should be prepared for the expenses as well.
Both the loadbanks, resistive and reactive, are good enough to power up a production unit in the best possible manner. You should be well aware of the fact that reactive loadbanks are used in units where the consumption of power is a little lesser than that of a resistive one. So make sure to check whether your unit requires more power or less to be run in the best possible manner and select the right loadbank as per its effectiveness.
The above instances provide you with a clear idea of the various things that are important for you to keep in the back of your mind while providing the best power solution for your production unit. So make sure to keep them in the back of your mind while hiring a reactive or a resistive loadbank for your production unit as per the requirement of power consumption of your unit.