Source Of Poultry Feed Pellet Making Machine Blockage

Author : Lyon Hagan | Published On : 12 Mar 2026

In the process of compound feed production, the secure as well as typical manufacturing of the poultry feed pellet making machine is really vital, because the poultry feed pelletizer completely completes the preparation of the poultry feed pellet making machine. But in actual manufacturing, due to different reasons, it is very easy to form a thick and difficult material in between the ring die as well as journalism roller. The pressure roller can not squeeze out the product from the die opening, so that the ring die of the poultry machine is stuck or slid, triggering the usual clog of the poultry pellet mill.

With on-site analysis of multi-equipment as well as multi-material, the reasons for machine clog are as complies with:

1. The die roll void is not suitable.
The gap between the die rolls is as well huge, causing an excessively thick product layer in between the die rolls, unequal circulation, uneven stress roll tension, and easy slippage. As soon as the extrusion force of the die roller on the material is less than the resistance of the inner wall surface of the die opening to the material, the product can not be squeezed out, which will certainly trigger blockage. In order to lower clogging, interest should be paid to adjusting the gap in between the die rolls during production.

When changing, it is best to create a state of closeness, turning and also non-rotation of the pressure roller as well as the ring die. According to observation, the void is usually 3-5mm. In this procedure, the experience and also change sensation of the poultry feed pellet making machine are extremely vital.


2. The impact of steam.
One of the most optimal production conditions in the production procedure of pellet feed appropriate raw material water, excellent steam top quality as well as enough conditioning time. Appropriate use completely dry saturated heavy steam granules can effectively improve the outcome of the poultry feed pellet granulator as well as the top quality of the granulated product. In order to guarantee excellent bit quality and also high result, along with the normal procedure of each transmission part of the poultry feed machine, the quality of dry saturated steam getting in the conditioner of the poultry feed pellet making machine ought to also be guaranteed.

Suitable saturated steam has conditioning and also lubricating effect in the granulation procedure, which can improve productivity, lower frictional heat energy, and lengthen the service life of ring die; it can minimize power usage and advertise starch gelation. Fiber-to-fiber bonding; it can improve the particle forming rate, decrease powder, make the material look smooth and clean, as well as boost product competitiveness.

The poor quality of the steam makes the wetness of the product too high when it leaves the conditioner, and also when it goes into the fragment tooth cavity, it is simple to cause blockage of the die opening, and also the stress roller slides, creating clog.

Especially:
① Insufficient steam pressure as well as high water content can easily cause the product to absorb too much water. At the same time, when the stress is low, the temperature level of the product is additionally reduced during conditioning, the starch can not be gelatinized well, and also the granulation result is poor;
② The vapor stress is unpredictable, changing high and low, and also the product conditioning is unpredictable, resulting in large changes in the current of the poultry feed making machine, irregular thirst of the product, as well as very easy obstruction in the typical production process.


The poultry feed pellet making machine needs to always take note of factors such as vapor pressure, conditioner feed rate, and so on, to avoid extreme wetness in product conditioning brought on by heavy steam pressure and also water content. At the same time, in order to minimize the variety of blockages triggered by steam top quality, the boiler room should offer top quality, steady completely dry saturated heavy steam. In the production process, the poultry feed granulator need to constantly pay attention to the wetness material of the quenched and also tempered product, which can be evaluated by a basic method. The details technique is: get hold of the product of the conditioner, hold it by hand, and also release it.

3. The impact of conditioning result.
In order to make pellet feed satisfy the affordable demands of the market, its exceptional top quality should be ensured. The conditioning effect of the material prior to granulation is very important, due to the fact that it straight affects the output as well as high quality of the poultry feed pellet making machine, specifically the water security of special aquatic items is an important sign.

If the material can not be completely conditioned as well as grown before granulation, it is hard to assure the water stability index. The so-called conditioning refers to the pretreatment of powder products prior to granulation, which is the procedure of completely stirring and taking in the powder to be granulated as well as an appropriate quantity of steam in the conditioner.

Select the conditioning tools that fulfills the technical needs, to ensure that the product can be fully stirred and blended with steam in the conditioner to attain the result of softening the material as well as gelatinizing starch, which contributes to the compression molding of powder and also generates qualified products.

redirected here making machine conditioner needs a long period of warmth conservation, heating as well as humidification, and also the variety of layers can be set up in any type of mix as needed to make certain that the product can totally fulfill the demands of conditioning, improve the surface area as well as internal high quality of the granular product, as well as boost its water resistance in water. Presently, the most suitable conditioning result can be attained by using the technique of Modulator+Qualifier+Modulator.

Via on-site debugging, the number of clogs of the poultry feed pellet making machine can be decreased by readjusting the vapor. As the central heating boiler equipment has actually been developed, the heavy steam offered has actually been determined. Take note of the therapy approach of water vapor in the heavy steam pipeline, try to omit the compressed water in the steam pipe, and also the heavy steam stress at the front end of the conditioner should be really steady.