Keys Truck: What's New? No One Is Discussing

Author : Pappas Houston | Published On : 10 Nov 2024

Key Blanks For Your Truck

All blanks for truck keys in one place. Select the car's manufacturer in the left column to view all key blank options.

They resemble keys made of metal however, the top is plastic and houses the transponder. Truck drivers prefer these keys. They lower the risk of theft by reducing the likelihood of accidental duplication.

Transponder Keys


Transponder keys, also referred to as chip keys, are fitted with a microchip that emits a unique signal each time they are inserted into the ignition. The car's computer system analyzes the code and begins the engine if it is in line with. This technology is an improvement in anti-theft technology and is present on nearly all modern vehicles built over the past 20 years.

You should replace your transponder's keys as soon as possible if you notice it is not working properly. A malfunctioning device will prevent the car from beginning because it cannot send the correct signal to its computer. This could leave you in a bind and in an awkward location. It could also cause damage to other parts of your vehicle, resulting in costly repairs.

If a transponder begins to malfunction, warning indicators will appear on the dashboard. These may include error messages and warning lights, which are helpful in determining what the issue is. A professional automotive locksmith who has experience with transponder keys will be in a position to assist you in determining the cause of the malfunction and ensure that the issue is fixed prior to you being left stranded.

A transponder key may stop working due to physical damage or a problem with the programming. These problems are difficult to diagnose and will require an expert to fix. It is recommended to find an expert locksmith locally who has expertise in transponder keys. SCANIA truck key will be able repair or replace the keys faster than a car dealership.

Non-transponder key heads are an elongated piece of metal. The key cuts are aligned to the tumblers of your ignition and held in place with spring-loaded clips. MERCEDES truck key can be cut by any certified locksmith for automotive use, and they generally cost less than transponder keys. They aren't as secure or safe as transponder keys, and they carry a higher risk of theft or duplication that is not authorized.

Keys to VATS

In older GM vehicles and trucks VATS keys were fitted to improve security. The keys function by using an embedded resistor to verify that you are using the proper ignition key to start the vehicle. The key also serves to shut off the engine if the wrong ignition key is used, which could make theft of the vehicle more difficult and deter thieves.

The VATS system was first introduced in 1986, along with the Corvette, and soon spread to other GM cars. Its simplicity and effectiveness helped GM reduce theft of these popular automobiles, and eventually led to more sophisticated systems such as transponder keys being used today.

Each VATS key is equipped with a resistor embedded in the blade of the key. The resistor contains one of 15 VATS codes. The key is then inserted in the ignition switch, and the VATS control module runs an electric current through the pellet. This determines the vats code or the resistance of the key. It also informs the fuel pumps and starter that it is an mechanical key.

Two leaf contacts are located in the lock cylinder and connect to the VATS pellet. The two wire pairs purple/white/black connect these to the ignition control module. Often times these wires break or become disconnected due to the constant bending required to operate the lock cylinder. The circuit also has an unimportant two-wire connector at the base of the steering column. This connector may fail due to wear, moisture or stress.

The resistance of the key pellet can be determined by placing the ohm leads of an meter across the resistor and reading the ohms. The Ohms are then matched to the vats code in the VATS chart. This can help a Locksmith determine the correct VATS blank to cut for a customer that requires an upgrade. This is also referred to as VATS relearn. The same procedure can be used to reset the Passlock or Passkey on GM vehicles. This is a straightforward but time-consuming process that requires the correct tools.

Key Fobs

A key fob, also known as a small electronic device is a replacement for your car's key. The fob typically has an RFID chip that transmits an unique signal that unlocks the door locks. The fob can be programmed to permit some users access, while preventing others from entering. Fobs are also frequently used in commercial settings to manage access to parking spaces and to automate the process of closing and opening doors or gates.

Fobs are powered by tiny batteries, and the batteries need to be replaced frequently. You can purchase replacement batteries at hardware stores or big box retailers and online. If you're handy, then you can even replace the battery yourself. You can find the complete instructions in the owner's manual or you can look up YouTube videos that will explain the steps to follow.

If you're in need of a new fob for your vehicle, it's best to visit the dealership. Based on the model and make of your vehicle, it might require specialized knowledge that's only available to the service department of the dealer.

Fob technology is evolving and the latest smart fobs offer a range of additional capabilities. For example some fobs have a short-range door-opening signal and a long-range parking gate-access signal in one, eliminating the requirement to carry two separate devices. Fobs may also feature multiple buttons as well as LED indicators to inform you if the fob is not in use or active.

Advanced fobs use encryption, along with other measures, to safeguard themselves from hacking attempts. The older, unencrypted credentials of fobs can be copied or cloned however newer fobs employ rolling codes, which generate and transmit a unique code each when a button is pressed. The constant change of codes makes it very challenging for bad actors to clone or hack fobs.

Certain smart key fobs may be paired with your smartphone, and they can communicate with other IoT devices to offer more automated functions. For example, a smart key fob can communicate with your home's security system as well as your thermostat's smart sensors to adjust based on your commute time and where you are.

Keyless Entry

Keyless entry is a simple feature that doesn't require you to insert your keys. You simply press the button on your key fob to unlock your vehicle, allowing you to quickly start your journey. This feature is especially useful for businesses that have large fleets of vehicles since it provides a greater degree of efficiency and user-friendliness.

This technology also provides enhanced security, since many keyless entry systems utilize advanced encryption signals which make it impossible to hack. This can make it more difficult to steal especially when it is utilized in conjunction with other security features such as GPS tracking. This can also be beneficial for fleets that manage their vehicles with integrated software, as it gives an accurate image of the location of every vehicle at all times.

Passive keyless entry car kits, such as the ones from VAIS Technology, are available to equip almost any vehicle with a passive keyless entry. This lets drivers lock their cars prior to touching a handle, turn on their lights as they approach, or activate any of 10 other electronic features that are activated when they get close.

Keyless entry isn't just a trend. It's a part of modern day automotive technology. It's clear that remote start and keyless access are now standard features on 62% of all new automobiles. It's important to remember that your key fob may be stolen if not secured in a secure manner. It's recommended to store your key fob in a signal blocking pouch or box when not in use, and to keep it in a garage or another safe place.