How Much Do Peugeot Keys Experts Earn?

Author : Oconnor Wind | Published On : 28 Jun 2024

Peugeot 208 Key Replacement

Peugeot 208 key replacement is best left to professional auto locksmiths who have the proper equipment and technical know-how. They can program and create keys more quickly and at a lower cost than dealerships.

If the key fob stopped locking or unlocking your doors it is likely due to a dead coin battery. There are many other reasons that the key could be malfunctioning.

Dead Coin Battery

A dead coin battery will hinder your Peugeot 208 from locking or unlocking, and won't start the engine. In this case, you will need to use the alternative starting method as described in your vehicle's owner's manual.

Another reason why your 208 may not start is that the spark plugs have worn down. The spark plugs ignite the fuel to start the engine. They have a limited lifespan. They will eventually break down if they're not used enough.

There is a simple solution to this issue. Check the voltage of the battery using a multimeter. If it's lower than 11.5 Volts then you must replace it. If the battery has corrosion it is crucial to clean its contacts. This can be accomplished by removing the rubber covers off the two terminals on the battery and then using a wirebrush to eliminate any corroded battery parts. Then, reconnect the cables to the positive and negative poles.

Water Damage

If your 208 doesn't start and the battery has not been replaced, you must inspect the spark plugs. You may find that they are simply too filthy and don't spark. The spark plugs can be cleaned in an workshop.

Peugeot automobiles use transponder keys that works with the car's ignition system. This makes sure that only the correct key is able to start the engine. If the chip in the Peugeot key is damaged, it won't send the proper signal to the vehicle.

Water damage is a common cause of this issue. This is especially prevalent in colder climates, as the vehicle might have been exposed to rain or snow. If this is the case, you should get in touch with a reputable locksmith who will have all of the equipment and tools needed to change the key's programming. They also have the latest technological know-how and machinery required to make a Peugeot 208 smart key. The process should not take more than 15 minutes.


Contacts to the battery are not working properly.

Peugeot replaced the transponder chips with a new model that utilizes electronic components mounted on a circuitboard. This new system works great when it's fresh, but as time passes, the circuit boards start to wear out and stop functioning properly.

This could stop the immobiliser chip from triggering the immobiliser chip, causing your car not to start. If this happens it's a good idea call a Peugeot specialist or locksmith.

The most frequent issue is when the battery of the key fob begins to die. This causes the blade of the key to stop feeding into the lock. A locksmith for cars can replace the battery and cut a new blade for you, this is generally a quick fix.

Faulty Receiver Module

It could be that the receiver module is defective when your Peugeot key fob isn't working after being dropped on the floor, exposed to a sudden rainstorm or accidentally washed. The receiver module is responsible for transmitting radio frequency to the onboard computer that regulates the central locking system of your Peugeot vehicle.

The key fob itself is fitted with rubber seals that prevent water from reaching the chip inside. However prolonged exposure to water could cause damage to these seals and the chip. Submerging the key fob into sea water at the beach or throwing it into the pool could be particularly damaging due to the high salt content.

The module must be replaced if the Peugeot spare key isn't working anymore. This can only by done by a Peugeot specialist or a professional auto locksmith. Like other automobiles, Peugeot keys are protected by a unique immobilizer system that requires the correct code to start the engine. This is why you should only be able to trust a professional Peugeot locksmith to handle the task of programming and creating an alternative.

Computer malfunctioning on-board

The on-board computer in your Peugeot is responsible for many of the systems in your car, including airbags and power windows. If something is wrong with these systems, they will usually display a code that indicates the issue. This code is stored inside the system and remains there until the issue is resolved. This could mean that the on-board computers to be replaced.

One of the most frequent reasons for the light coming on is loose or corroded connection in the airbag sensor. This could be due to wear and tear, ageing or exposure to salt and moisture. This problem should be dealt with as soon as you can, because an airbag that is not functioning could pose a risk in the event of an accident.

If you notice the error "card not found" on your Peugeot, the key battery inside the key fob may be weak or dead. peugeot 207 car key will stop the key fob sending a signal to disarm the immobilizer in your vehicle. You can test this by pressing the unlock button on the key fob, then attempting to start your car. If this fails then the battery in the key needs to be replaced.