How Do I Know if My Clutch Pressure Plate is Faulty?

Author : Leonard Hughes | Published On : 14 Oct 2021

A clutch pressure plate is a very important part of your manual car. If you have already been using your manual vehicle for a while, you would already know the important responsibilities of a clutch.

When your car starts, stops, or even when you change the gear, the clutch has a role to play. Being so valuable, the clutch tends to develop faults over time.

However, you should know that the clutch lasts the user for a long time with an estimated lifespan of 60,000 kilometers, but this varies depending on the cat model with some lasting much longer than this.

The issue with the clutch almost certainly comes from the pressure plate. When this is the case there are certain ways to know so you can quickly replace it before an even bigger problem surfaces.

•    Difficult Clutch Pedal

Ordinarily, to use the clutch of a vehicle, certain amounts of pressure are needed, yet, this pressure which is applied is not excessive.

However, once you notice that your vehicle requires even tougher or higher amounts of force before you can press the pedal and engage the clutch, then you should know that this is the first most obvious sign that your clutch pressure plate needs changing.

•    Slacky Clutch Pedal

You don't need your clutch pedal to be too tough, neither do you want t too loose. This is why when the clutch pedal begins to feel a bit free-er than its original self, then you may want to have a mechanic check it out. If the issue is from the clutch pressure plate, then you know what to do.

•    Vibrating Clutch Pedal

Your first move should be to check the pressure plate if you notice that your vehicle's clutch pedal is wobbling.
This usually happens when the rotating parts of the vehicle's transmission are pulsating as well. You should also check the release lever in case there may be a need for an adjustment.

•    Noisy Clutch Release

It's probably time that you stopped ignoring the sound your car makes after the clutch release. This creaky sound may be from the spring arrangement or the pressure plate.

Whichever it is, it's best to check both for confirmation then take the necessary steps.

•    Overheating

Whenever you notice that your vehicle is overheating you already know it's not a good sign. This is the case with the vehicle's clutch system.

When this happens, just begin making plans for a change in pressure plate because if not handled immediately, this may cause a major problem.

The clutch pressure plate is an important part of your vehicle's clutch system. It is responsible for holding down the clutch pressure plate against the engine flywheel. Through it, the driver can switch gears easily. When it becomes faulty, it fails to perform its functions effectively.

Considering how important a clutch pressure plate is, whenever it develops a fault, it is usually easy for the experienced driver to tell. However, if you need a couple of pointers, then the above are some unmissable songs that would let you know when you should change the clutch pressure plate of your vehicle.

Dynojet Research manufactures and sells after-market performance products and diagnostic tools including dynamometers, quick shifters, clutch pressure plates, airbox lids, fuel controller, etc. for motorcycles, UTVs, dirt bikes, and ATVs. To know more, visit https://www.dynojet.com/about-us/.