An Ultimate Guide To Ice Rink Installation And Maintenance
Author : Rink Systems | Published On : 31 Dec 2021
When cold waves dash to your area, you can hardly wait to go out and put on your ice skates for fun. Whether you want to dance on the ice surface or strike the puck into the net, the yard has to get ready with a functional ice rink. Building a new rink in private property is an easy task, but there is a need for understanding the fundamentals of setting up the facility. To turn your backyard into an arena to perform sports activity this vacation, check out the installation and maintenance guidelines given below.
Install before freezing weather
Ice skating represents the best time of winter, but it does not mean that you should wait for the frostbite season. The arrival of cold wind right after the fall season warrants you to prepare for the seasonal activity. Some people think that it is easy to freeze water in freezing weather, but it will make it more difficult to level the ice without breaking it. Invest in infrared temperature sensor, lining, materials, and dashboard equipment before the ground becomes frozen.
Wear appropriate shoes while flooding
When preparing for the mini ice rink, you are going to spend some time on the ground to install the liner and dashboards. Some tasks require you to walk into the rink while flooding with water. In this process, stepping over the liner with sharp edge boots can damage the materials. After filling the rink, the slightly frozen surface can also receive scratches if you walk on it with heavy shoes. Wear a pair of rubber Wellington boots to execute the task.
Get rid of snow
When installing an ice rink, keep in mind that it is an arena made of water, not with snowflakes. As you move across the rink to level the surface using a snow blower or snow plow, you have to remove snow from the ground. The presence of snow in the frozen water can form lumps that could crack after melting the upper part. Making a temporary roof above the rink during the flooding process can avoid blitz of a snowstorm.
Resurfacing the rink
Small bubbles and slime of muds can become dent and gouges when they break. That is why resurfacing is essential once you installed the ice rink. In this process, you need to spread or flood the rink using a hose or bucket if you have the water source near the rink. The best way to smoothen the bumpy areas is to pour hot water and soften the ice. Maintain the surface level using an ice rink temperature control system. Use top-quality caps to reduce the risks of striking the boards with any sharp object like a shovel.
When the snowflakes begin to melt after a fun-filled winter, your rink is likely to evaporate some water. Wait until the water from the ground level thaws, and you can drain the water out.
Author's Bio - The writer is an avid online blogger. This article is about infrared temperature sensor.