17 Signs To Know You Work With Peugeot 208 Key Replacement

Author : Perkins Pitts | Published On : 29 Jun 2024

Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob has stopped working one day, it could be due to a dead coin battery or water damage or receiver module issues, or a malfunctioning electronic chip. Fortunately, these issues are easy to fix and you'll have your car back to normal in no time at all!

The key blade can become worn out and cause an issue with your car key. It is easy to fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them put in the new key blade for you.


The key fob of your Peugeot 308 may die or become weak enough to not send a clear signal. The key fob can be inoperable and prevent you from locking or unlocking your doors, or even starting your engine. You'll require a new battery for your key fob to fix this.

sneak a peek at this web-site 'll need a new battery from an auto parts shop or your local hardware store. Make sure the battery is brand new and has not sat on the shelf too long. A brand new battery will have more capacity and be able to send a stronger signal the car.

After replacing the battery, try unlocking and locking the doors of your Peugeot by using the key fob. If the doors won't open, the problem is likely to be with the receiver module of your car which can be programmed by your local Peugeot dealer.

It's also possible that the key fob's internal chip is damaged. This could happen if you drop your key fob on the ground or expose it to water. Rubber seals that shield your chip from moisture could get worn out over time. This is especially true if you expose your key fob to water for extended periods of time, like submerging it at the beach in the ocean. To prevent this from happening it is recommended to keep your key fob clear of water and out of water.

Water Damage

Don't give up on your key fob when it gets wet, whether you dropped it in the pool or slipped into a water puddle. While the key fob has rubber seals that protect it from water, long-term exposure to water can lead to damage to its electronic chip. Since water is a good conductor so any water that gets inside the key fob will result in a series of short circuits that will eventually destroy the chip. After taking the battery out, scrub its contacts with isopropyl alcohol, and dry it off completely before putting it back in.

Your Peugeot 308 may not start due to the battery being dead. Jumper cables are a fantastic method of restarting the engine in case you have an additional vehicle. If the battery has a problem, it must be replaced.

Another possible cause is a bad receiver in the vehicle, which can prevent it from receiving a signal from the key fob. It could be due to a problem with the antenna or wiring or the key fob may be damaged. It could be necessary to program a new keyfob for your vehicle if using one. If you are unable fix the problem yourself seek out a professional technician. A professional who has been trained in the field will be able determine the issue quickly and fix the issue immediately.

Radio Interference

Interference can trigger symptoms such as a key fob that's not recognized or has a limited range. It could be radiated or conducted, with the latter resultant from power supply cables or speakers wiring that are too close to electrical components. Generally speaking, rerouting cables or moving them further away from the components may solve the issue.

It's unlikely that anyone is listening in on the signals from your key fob to take your car away, but it is possible that the signal has been masked by radio frequency interference. Fortunately, this is not a problem to fix.

If you're having issues with your key fobs that aren't being recognized, try a new battery. Also, make sure that the battery is the proper size and type. Batteries that aren't the correct dimensions can harm your battery.

These devices may interfere with the key signal if they use the same radio frequency. It is recommended to avoid using these devices with your key fob.

Pairing Issues

The remote keyless entry system is a receiver that receives radio frequency signals from the key fob. It is not possible to start your vehicle if this receiver is malfunctioning even if the key fob is working and is reprogrammable. The issue can be caused by a number of things, including the battery of a coin that is dead and water damage. The receiver could also be malfunctioning because of a software bug or internal damage to the key.

The coin battery in your Peugeot 308 keyfob is likely to have gone out of service. It is easy to replace it with a brand new battery however, it's important to select the correct battery for your key fob. Using an incorrect battery could lead to further problems with the key fob, therefore it is recommended to use either the original or a replacement that is identical in size, voltage, and specifications.

Another reason that the reason your Peugeot 308 key fob might not be working is that it has been paired to an unrelated vehicle. You may have accidentally given your key fob a friend or the key was used to unlock other vehicles. You can fix this by reprogramming the key fob using an OBDII scanner. This tool will ask for details about your car for example, its VIN or engine type. It is important to enter the correct details.